MEMB2 Gerät zur Untersuchung des Momentengleichgewichts an einem Zweiarmhebel

7.1.3.- STATIK UND DYNAMIK 14.1.3.- STATIK UND DYNAMIK

INNOVATIVE SYSTEME

The Unit for studying Equilibrium of Moments on a Two Arm Lever, "MEMB2", provides a simple way of understanding experiments on the equilibrium of moments.

Allgemeine Beschreibung anzeigen

Katalog

Wettbewerbsspezifikationen

Erweiterungen

ICAI

Interaktive Computerunterrichtssoftware

MSAC

Modulares Erfassungs- und Steuerungssystem

ALLGEMEINE BESCHREIBUNG

The Unit for studying Equilibrium of Moments on a Two Arm Lever,"MEMB2", allows to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.

A pivoted beam in the extreme of a vertical support represents a two-arm lever. Several loads can be applied at various positions of the lever with movable riders, weights and weight holders. These loads will make the beam rotate. The equilibrium is attained by moving the loads, and the moment necessary to overcome this rotation and keep the beam level can be determined.

The beam is graduated in each direction from the central pivot to read the distances from the pivot point – the lever arms. The calculation of the lever arms can be verified in the exercises.

Three movable riders are included for applying loads.

ÜBUNGEN UND GEFÜHRTE PRAKTIKEN

GEFÜHRTE PRAKTISCHE ÜBUNGEN IM HANDBUCH ENTHALTEN

Investigation of the equilibrium of moments on a two-arm lever: applied forces, generated moments and equilibrium.
Demonstration of the simple equilibrium of moments by loading a pivoted beam.
Study of the stable system of a loaded pivoted beam.
Comparison of the experimental values with the theoretical values using simple moments.
Study of the action of forces dependent on the lever arm.

ERGÄNZENDE AUSRÜSTUNG

COMPUTER CONTROLLED BALANCE OF RECIPROCATING MASSES UNIT - MBMRC

MBMRC

Available

7.1.3.- STATIK UND DYNAMIK

MBMRC

Gerät zur Massenbilanzierung bei hin- und hergehenden Bewegungen, computergesteuert (PC)

The Computer Controlled Balance of Reciprocating Masses Unit, "MBMRC", is a bench-mounting unit that allows to investigate and examine the free masses and moments of a reciprocating engine with a single cylinder, with two cylinders or with four...

MEAL

Available

7.1.3.- STATIK UND DYNAMIK

MEAL

Gerät zur Untersuchung und Analyse von Nocken

The Cam Analysis Unit "MEAL" allows to observe the effect of the profile of a cam, the study of the displacement, velocity and acceleration profiles of the cam and the identification of the factors that can modify the dynamics of the cam. This...

CORIOLIS FORCE DEMONSTRATION UNIT - MDFC

MDFC

Available

7.1.3.- STATIK UND DYNAMIK

MDFC

Gerät zur Demonstration der Corioliskraft

The Coriolis Force Demonstration Unit, "MDFC", is used to observe the deflection of a jet of water generated by a pump attached to a rotating arm that rotates to different speeds in a horizontal plane. An electronically controlled motor rotates...

MFCE

Available

7.1.3.- STATIK UND DYNAMIK

MFCE

Gerät zur Untersuchung der Zentrifugalkraft

The Centrifugal Force Unit, "MFCE", is used to demonstrate the relationship between centrifugal force, rotational speed, mass of a rotating body and distance from the axis. The unit consists of a vertical axis of rotation and a rotating arm....

Available

7.1.3.- STATIK UND DYNAMIK

MGI

Gyroskop

The Gyroscope, "MGI", allows the experimental demonstration of the different rotation modes of a gyroscope and the moments generated by the gyroscopic effect. The rotor of the electric motor (rotating motor) shares a horizontally supported shaft...

Available

7.1.3.- STATIK UND DYNAMIK

CGU

Gerät für Zentrifugale Regler

The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...

Available

7.1.3.- STATIK UND DYNAMIK

MED

Gerät für dynamisches/statisches Gleichgewicht

The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...

Available

7.1.3.- STATIK UND DYNAMIK

MES

Gerät für einfaches Gleichgewicht

The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...

Available

7.1.3.- STATIK UND DYNAMIK

MIF

Gerät für ein Schwungrad

The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...

MRYE1

Available

7.1.3.- STATIK UND DYNAMIK

MRYE1

Gerät für Rad und Achse (Drehbank)

The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...

WHEEL AND DIFFERENTIAL AXLE UNIT - MRYE2

MRYE2

Available

7.1.3.- STATIK UND DYNAMIK

MRYE2

Gerät für Rad und Differentialachse (Differential-Drehbank)

The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...

MELH

Available

7.1.3.- STATIK UND DYNAMIK

MELH

Gerät zur Untersuchung des Hooke'schen Gesetzes

The Unit for studying Hooke's Law, "MELH", designed by EDIBON, demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring –...

QUALITÄT

KUNDENDIENST

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS

MEMB2 Gerät zur Untersuchung des Momentengleichgewichts an einem Zweiarmhebel

INNOVATIVE SYSTEME

Erweiterungen

ÄHNLICHE NEUIGKEITEN

ALLGEMEINE BESCHREIBUNG

ÜBUNGEN UND GEFÜHRTE PRAKTIKEN

GEFÜHRTE PRAKTISCHE ÜBUNGEN IM HANDBUCH ENTHALTEN

ERGÄNZENDE AUSRÜSTUNG

QUALITÄT

KUNDENDIENST