7.2.2.- ZAHNRÄDER, DIFFERENTIALE UND GETRIEBE

ZAHNRÄDER, DIFFERENTIALE UND GETRIEBE UNITS

1 - 10 von 10 Artikel(n)

MESE-T

Available

7.1.2.2.- VERZAHNUNG

MESE-T

Getriebe-Studie

The Geared Study Drive Unit, "MESE", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission.For the...

Available

7.2.2.- ZAHNRÄDER, DIFFERENTIALE UND GETRIEBE

MCC

Automobilgetriebe

The Gearbox unit, "MCC", has been designed to represent the typical position of a simple gearbox with three gears ratio and reverse.Basically, the gearbox consists of several gears of different size that can be meshed as required. Those gears are...

MTE1

Available

7.2.2.- ZAHNRÄDER, DIFFERENTIALE UND GETRIEBE

MTE1

Gerät für ein epizykloidales Getriebe (1 Element)

The Epicyclic Gear Unit (1 element), "MTE1", includes a set of epicyclic gears that allows the student to study different reduction ratios (direct drive and overdrive), as well as torque conversion.A simple epicyclic gears set consists of:Sun gear...

MTE2

Available

7.2.2.- ZAHNRÄDER, DIFFERENTIALE UND GETRIEBE

MTE2

Gerät für ein epizykloidales Getriebe (2 Elemente)

The Epicyclic Gear Unit (2 elements), "MTE2", consists of two coupled epicyclic gears sets. It will allow the students to carry out experiments of different gear ratios, as well as the torque conversions.The epicyclic gears installed in the...

MTE3

Available

7.2.2.- ZAHNRÄDER, DIFFERENTIALE UND GETRIEBE

MTE3

Gerät für ein epizykloidales Getriebe (3 Elemente)

The Epicyclic Gear Unit (3 elements), "MTE3", consists of three coupled epicyclic gears sets. It will allow the students to carry out experiments of different gear ratios, as well as the torque conversions.The epicyclic gears installed in the...

BORG-WARNER AUTOMATIC TRANSMISSION - MBW

Available

7.2.2.- ZAHNRÄDER, DIFFERENTIALE UND GETRIEBE

MBW

Automatikgetriebe BorgWarner

The main distinguishing element of automatic transmissions is its group of epicyclic gearing.The gear assembly of the "MBW" unit consists of:Two sun gears, one to transfer forward gear ratios and one reverse gear.Two sets of planet gears: long and...

DIFFERENTIAL-CROWNWHEEL AND PINION - MDC

Available

7.2.2.- ZAHNRÄDER, DIFFERENTIALE UND GETRIEBE

MDC

Automobil-Differential. Kronenrad und Ritzel

The Differential-Crownwheel and Pinion, "MDC", designed by EDIBON, simulates a differential mechanism. The function of the differential mechanism is to enable the drive wheels rotate at different speeds, regardless of whether they are the front or...

Available

7.2.2.- ZAHNRÄDER, DIFFERENTIALE UND GETRIEBE

MEC

Gerät zur Untersuchung von Überdrehzahl

The Overdrive Unit, "MEC", includes a set of epicyclical gears that represent an application of a simple epicyclic arrangement of the type used in a motor vehicle overdrive.Simple epicyclic set consists of:Sun gear that rotates together with the...

COMPUTER CONTROLLED BALANCE OF RECIPROCATING MASSES UNIT - MBMRC

MBMRC

Available

7.1.3.- STATIK UND DYNAMIK

MBMRC

Gerät zur Massenbilanzierung bei hin- und hergehenden Bewegungen, computergesteuert (PC)

The Computer Controlled Balance of Reciprocating Masses Unit, "MBMRC", is a bench-mounting unit that allows to investigate and examine the free masses and moments of a reciprocating engine with a single cylinder, with two cylinders or with four...

Available

7.1.3.- STATIK UND DYNAMIK

MED

Gerät für dynamisches/statisches Gleichgewicht

The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS