7.1.6.- STRUKTURMECHANIK

STRUKTURMECHANIK UNITS

1.- PHYSIK 2.- ELEKTRONIK 3.- KOMMUNIKATIONSTECHNIK 4.- ELEKTRIK 5.- ENERGIETECHNIK 6.- MECHATRONIK UND AUTOMATISIERUNG 7.- MECHANIK 8.- STRÖMUNGSMECHANIK 9.- THERMODYNAMIK & THERMOTECHNIK 10.- PROZESSSTEUERUNG 11.- CHEMIEINGENIEURWESEN 12.- NAHRUNGSMITTEL- UND WASSERTECHNOLOGIE 13.- UMWELTTECHNIK 14.- BIOMEDIZINTECHNIK LABORZUBEHÖR MAßGESCHNEIDERTE PILOTANLAGEN
7.1.- MASCHINENBAU 7.2.- AUTOMOTIVE MECHANICAL ENGINEERING 7.3.- WERKSTOFFTECHNIK 7.4.- INSTALLATIONEN UND WARTUNG
7.1.1.- MECHANICS FUNDAMENTALS KITS 7.1.2.- EINFACHE MASCHINEN 7.1.3.- STATIK UND DYNAMIK 7.1.4.- VIBRATIONEN UND OSZILLATIONEN 7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG) 7.1.6.- STRUKTURMECHANIK
Es sind keine Untergruppen vorhanden
1 - 23 von 23 Artikel(n)
12 24 36
SUSPENSION BRIDGE UNIT - MVS
  • MVS
Available
7.1.6.- STRUKTURMECHANIK

MVS

Gerät für Hängebrücken.

The Suspension Bridge Unit, "MVS", has been meticulously designed by EDIBON to explore the dynamics of stresses in a suspension bridge system. This unit simulates a suspension bridge using a deck and two parallel main cables, allowing students to...
Einheit Anzeigen
PARABOLIC ARCH UNIT - MARP
  • MARP
Available
7.1.6.- STRUKTURMECHANIK

MARP

Parabolischer- Bogen- Einheit

The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.One support of the arch is fixed whereas the...
Einheit Anzeigen
THREE-HINGED ARCH UNIT - MART
  • MART
Available
7.1.6.- STRUKTURMECHANIK

MART

Dreigelenkbogeneinheit

The Three-Hinged Arch Unit "MART" allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...
Einheit Anzeigen
THICK WALLED CYLINDER UNIT - MCPG
  • MCPG
Available
7.1.6.- STRUKTURMECHANIK

MCPG

Thick Walled Cylinder Unit

In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...
Einheit Anzeigen
TWO HINGED ARCH UNIT - MFL
  • MFL
Available
7.1.6.- STRUKTURMECHANIK

MFL

Biegegerät (zweiseitig befestigter Bogen).

The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...
Einheit Anzeigen
PORTAL FRAME UNIT - MPO
  • MPO
Available
7.1.6.- STRUKTURMECHANIK

MPO

Portalrahmen.

The Portal Frame Unit, "MPO", designed by EDIBON, allows for precise measurements of vertical and horizontal deflection in an embedded rectangular portal frame. By applying various loads with specific weights, changes in the portal frame’s...
Einheit Anzeigen
STRESS HYPOTHESES UNIT - STH
  • STH
Available
7.1.6.- STRUKTURMECHANIK

STH

Stress Hypotheses Unit

The Stress Hypotheses Unit, "STH", allows the study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are applied, avoiding...
Einheit Anzeigen
THIN CYLINDER UNIT - MCD
  • MCD
Available
7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MCD

Gerät für dünne Zylinder.

The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...
Einheit Anzeigen
UNIT TO STUDY STRESS ON A MEMBRANE - SSM
  • SSM
Available
7.1.6.- STRUKTURMECHANIK

SSM

Unit to Study Stress on a Membrane

The Unit to Study Stress on a Membrane, "SSM", designed by EDIBON, allows the study of stresses and deformations in a thin disc or membrane subjected to different compressive stresses.The main element of the equipment is a thin disc or membrane...
Einheit Anzeigen
UNSYMMETRICAL CANTILEVER UNIT - MVV
  • MVV
Available
7.1.6.- STRUKTURMECHANIK

MVV

Messgerät für Kragbalken.

The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...
Einheit Anzeigen
DEFLECTION OF CURVED BARS UNIT - MDB
  • MDB
Available
7.3.2.1.- MECHANISCHE TESTS

MDB

Gerät für die Durchbiegung bei gekrümmten Balken.

The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...
Einheit Anzeigen
BEAM DEFLECTION UNIT - MFV
  • MFV
Available
7.3.2.1.- MECHANISCHE TESTS

MFV

Gerät zur Strahlenablenkung.

The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...
Einheit Anzeigen
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- MECHANISCHE TESTS

MFLT

Maschine zur Untersuchung des Knickens von Stäben

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
Einheit Anzeigen
EULER BUCKLING MODES UNIT - MEBM
  • MEBM
Available
7.3.2.1.- MECHANISCHE TESTS

MEBM

Euler Buckling Modes Unit

With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
Einheit Anzeigen
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- MECHANISCHE TESTS

MUP

Gerät zur Belastung von Strebebalken.

The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
Einheit Anzeigen
SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF
  • MMF
Available
7.3.2.1.- MECHANISCHE TESTS

MMF

Messgerät für die Querkraft und das Biegemoment.

The Shear Force and Bending Momentum Unit, "MMF", unit is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the application of one...
Einheit Anzeigen
Informationen anfordern