7.1.3.- STATIK UND DYNAMIK

STATIK UND DYNAMIK UNITS

1 - 15 von 15 Artikel(n)

UNIT FOR STUDYING EQUILIBRIUM OF MOMENTS ON A TWO ARM LEVER - MEMB2

MEMB2

Available

7.1.3.- STATIK UND DYNAMIK

MEMB2

Gerät zur Untersuchung des Momentengleichgewichts an einem Zweiarmhebel

The Unit for studying Equilibrium of Moments on a Two Arm Lever,"MEMB2", allows to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.A pivoted beam in the extreme of a vertical support...

COMPUTER CONTROLLED BALANCE OF RECIPROCATING MASSES UNIT - MBMRC

MBMRC

Available

7.1.3.- STATIK UND DYNAMIK

MBMRC

Gerät zur Massenbilanzierung bei hin- und hergehenden Bewegungen, computergesteuert (PC)

The Computer Controlled Balance of Reciprocating Masses Unit, "MBMRC", is a bench-mounting unit that allows to investigate and examine the free masses and moments of a reciprocating engine with a single cylinder, with two cylinders or with four...

MEAL

Available

7.1.3.- STATIK UND DYNAMIK

MEAL

Gerät zur Untersuchung und Analyse von Nocken

The Cam Analysis Unit "MEAL" allows to observe the effect of the profile of a cam, the study of the displacement, velocity and acceleration profiles of the cam and the identification of the factors that can modify the dynamics of the cam. This...

CORIOLIS FORCE DEMONSTRATION UNIT - MDFC

MDFC

Available

7.1.3.- STATIK UND DYNAMIK

MDFC

Gerät zur Demonstration der Corioliskraft

The Coriolis Force Demonstration Unit, "MDFC", is used to observe the deflection of a jet of water generated by a pump attached to a rotating arm that rotates to different speeds in a horizontal plane. An electronically controlled motor rotates...

MFCE

Available

7.1.3.- STATIK UND DYNAMIK

MFCE

Gerät zur Untersuchung der Zentrifugalkraft

The Centrifugal Force Unit, "MFCE", is used to demonstrate the relationship between centrifugal force, rotational speed, mass of a rotating body and distance from the axis. The unit consists of a vertical axis of rotation and a rotating arm....

Available

7.1.3.- STATIK UND DYNAMIK

MGI

Gyroskop

The Gyroscope, "MGI", allows the experimental demonstration of the different rotation modes of a gyroscope and the moments generated by the gyroscopic effect. The rotor of the electric motor (rotating motor) shares a horizontally supported shaft...

Available

7.1.3.- STATIK UND DYNAMIK

CGU

Gerät für Zentrifugale Regler

The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...

Available

7.1.3.- STATIK UND DYNAMIK

MED

Gerät für dynamisches/statisches Gleichgewicht

The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...

Available

7.1.3.- STATIK UND DYNAMIK

MES

Gerät für einfaches Gleichgewicht

The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...

Available

7.1.3.- STATIK UND DYNAMIK

MIF

Gerät für ein Schwungrad

The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...

MRYE1

Available

7.1.3.- STATIK UND DYNAMIK

MRYE1

Gerät für Rad und Achse (Drehbank)

The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...

WHEEL AND DIFFERENTIAL AXLE UNIT - MRYE2

MRYE2

Available

7.1.3.- STATIK UND DYNAMIK

MRYE2

Gerät für Rad und Differentialachse (Differential-Drehbank)

The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...

MELH

Available

7.1.3.- STATIK UND DYNAMIK

MELH

Gerät zur Untersuchung des Hooke'schen Gesetzes

The Unit for studying Hooke's Law, "MELH", designed by EDIBON, demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring –...

MSHU

Available

7.1.3.- STATIK UND DYNAMIK

MSHU

Gerät für harmonische Schwingungen

This Simple Harmonic Motion Unit, "MSHU", allows many experiments using several pendulums and devices, such as different types of pendulums (simple, bifilar, trifilar and Kater’s pendulum) and springs.Consists of a panel with a support that allows...

Available

7.1.3.- STATIK UND DYNAMIK

SRI

Gerät zur Untersuchung des Rotations-Trägheitsmoments

The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS