AMCP Montage- und Wartungsausrüstung für eine Zentrifugalpumpe

8.9.2.- ABNEHMBARE MODELLE

ASSEMBLY AND MAINTENANCE OF A CENTRIFUGAL PUMP UNIT - AMCP

INNOVATIVE SYSTEME

The centrifugal pumps belong to the group of rotodynamic pumps, where the fluid is boosted thanks to the acceleration acquired whenpassing through the operating impeller.

Allgemeine Beschreibung anzeigen

Katalog

Wettbewerbsspezifikationen

Erweiterungen

ICAI

Interaktive Computerunterrichtssoftware

ALLGEMEINE BESCHREIBUNG

The centrifugal pumps belong to the group of rotodynamic pumps, where the fluid is boosted thanks to the acceleration acquired whenpassing through the operating impeller.

This acceleration, which starts from the center of the impeller and goes to the outside, is transformedinto pressure at the end of the impeller, while negative pressures are generated at the suction side of the fluid. In most cases, this type ofdevices are installed in parallel in the industry, this way maintenance and repair tasks can be performed frequently without stopping theprocess.

The most important applications of this type of pumps include driving different liquids into industrial processes applications, waterpurification, food sector, distillation and filtration processes, etc.

ÄHNLICHE VERFÜGBARE GERÄTE

ASSEMBLY AND MAINTENANCE OF A MULTISTAGE CENTRIFUGAL PUMP UNIT - AMMCP

AMMCP

Available

8.9.2.- ABNEHMBARE MODELLE

AMMCP

Montage- und Wartungsausrüstung für eine mehrstufige Zentrifugalpumpe

The multistage centrifugal pumps belong to the group of rotodynamic pumps, where the water is driven by centrifugal forces caused by the rotational movement of the impeller. Multi-stage centrifugal pumps can increase its lifting height, depending...

ASSEMBLY AND MAINTENANCE OF A SCREW PUMP UNIT - AMSP

AMSP

Available

8.9.2.- ABNEHMBARE MODELLE

AMSP

Montage- und Wartungsausrüstung für eine Schraubenpumpe

The screw pumps belong to the group of positive displacement pumps, which use aneccentric helical screw (rotor) that moves inside a sleeve (stator), making the liquid flowbetween the screw and the sleeve. The most important applications of this...

ASSEMBLY AND MAINTENANCE OF A DIAPHRAGM PUMP UNIT - AMDP

AMDP

Available

8.9.2.- ABNEHMBARE MODELLE

AMDP

Montage- und Wartungsausrüstung für eine Membranpumpe

Membrane pumps or diaphragm pumps belong to the group of positive displacement pumps, where the pressure increase is obtained by pushing elastic walls, known as, membranes or diaphragms, which change the volume of the chamber. Retention valves,...

ASSEMBLY AND MAINTENANCE OF A PISTON PUMP UNIT - AMPP

AMPP

Available

8.9.2.- ABNEHMBARE MODELLE

AMPP

Montage- und Wartungsausrüstung für eine Kolbenpumpe

The piston pumps belong to the group of positive displacement pumps, where there are one or several fixed cavities whose volume can be changed due to the effect of a piston. The movement of the fluid is discontinuous and the charge and discharge...

ASSEMBLY AND MAINTENANCE OF AN IN-LINE CENTRIFUGAL PUMP UNIT - AMLCP

AMLCP

Available

8.9.2.- ABNEHMBARE MODELLE

AMLCP

Montage- und Wartungsausrüstung für eine Inline-Zentrifugalpumpe

The centrifugal in-line pumps belong to the rotodynamic pump group, these pumps are the most used currently to pump liquids in general. In-line pumps are installed in straight pipes, and the main difference with a standard pump is that the suction...

ASSEMBLY AND MAINTENANCE OF A GEAR PUMP UNIT - AMGP

AMGP

Available

8.9.2.- ABNEHMBARE MODELLE

AMGP

Montage- und Wartungsausrüstung für eine Zahnradpumpe

The gear pumps belong to the group of positive displacement, rotary piston pumps, which produce flow by transporting the fluid betweenthe teeth of two coupled gears. One of them is driven by the shaft of the pump (driving shaft), which turns the...

ERGÄNZENDE AUSRÜSTUNG

Available

8.9.2.- ABNEHMBARE MODELLE

ASV

Montageausrüstung für ein Absperrventil

The Assembly of a Shut-Off Valve Unit, "ASV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts list and the...

ASSEMBLY OF A MOTORIZED CONTROL VALVE UNIT - AMCV

AMCV

Available

8.9.2.- ABNEHMBARE MODELLE

AMCV

Montageausrüstung für ein motorisiertes Regelventil

The Assembly of a Motorized Control Valve Unit, "AMCV" is a ball motorized control valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit,...

ASSEMBLY OF A CONTROL PNEUMATIC VALVE UNIT - ACPV

ACPV

Available

8.9.2.- ABNEHMBARE MODELLE

ACPV

Montageausrüstung für ein pneumatisches Regelventil

The Assembly of a Control Pneumatic Valve Unit, "ACPV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts...

Available

8.9.2.- ABNEHMBARE MODELLE

AMP

Assembly and Maintenance of Pumps

The different sets for the assembly and maintenance of pumps have all the parts in a case for an easy transport, facilitating the clearidentification of all the components and allowing the systematic assembly and disassembly, maintenance and...