Verkaufshits

271 - 300 von 889 Artikel(n)

COMPUTER CONTROLLED BUTTER MAKER TEACHING UNIT - EMANC

EMANC

Available

12.2.- BEHANDLUNG VON MILCHPRODUKTEN

EMANC

Gerät für Analoge Modulationen

The Computer Controlled Butter Maker Teaching Unit, "EMANC", has been designed to provide practical training in the manufacture of butter.The main structure is a stainless steel tank with a capacity of 25 l. At the top, a cover made of stainless...

EMDA/A

Available

3.2.1.- CODIERUNG, MODULATION UND SIGNALVERARBEITUNGSTHEORIE

EMDA/A

Gerät für Analoge Modulationen

The Analog Modulations Unit, "EMDA/A", is a complete analog communications unit designed to explain the basic concepts of analog modulation. It covers the principles of many of the modulation and demodulation techniques used in modern analog...

Available

3.2.2.- ANTENNEN- UND MIKROWELLENTHEORIE

EAN

Gerät für Antennen

The Antenna Unit, "EAN", is a complete and affordable unit and no extra hardware is required for complete all the practice set.The "EAN" allows students to learn how to perform the essential antenna measurements: radiation pattern with the measure...

EANC

Available

3.2.2.- ANTENNEN- UND MIKROWELLENTHEORIE

EANC

Gerät für Antennen, computergesteuert (PC)

The Computer Controlled Antenna Unit, "EANC", is an advanced system that operates in conjunction with a computer (PC), which allows the control and data acquisition of the antenna measurement by means the SCADA System (control interface box +...

DRIVE UNIT FOR TRIBOLOGICAL TESTS - MEMT-UB

Zubehör von MEMT

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MEMT-UB

Gerät für Antriebsversuche in der Tribologie

Zubehör von MEMT

This unit is common for the modules type "MEMT". It consists of a base unit and an electronic console:The Base Unit consists of a drive unit formed by a DC motor with a shaft. The motor is mounted in a reduction gear, obtaining enough torque in...

EPAB

Available

11.1.2.- EVAPORATION

EPAB

Gerät für aufsteigenden Dünnschichtverdampfer

The objective of evaporation is to concentrate a non-volatile solute, carrying out the elimination of a volatile compound. Water is the volatile compound used in most evaporations.Basically, the unit consists of the following circuits:The feed...

DOUBLE EFFECT RISING FILM EVAPORATOR - EDPAB

EDPAB

Available

11.1.2.- EVAPORATION

EDPAB

Gerät für aufsteigenden Dünnschichtverdampfer mit Doppelwirkung

The Double Effect Rising Film Evaporator, "EDPAB", designed by EDIBON, allows to observe and control a serial, parallel or double effect evaporation process.The unit consists of two evaporators with a single glass tube, allowing the student to...

COMPUTER CONTROLLED RISING FILM EVAPORATOR - EPAC

EPAC

Available

11.1.2.- EVAPORATION

EPAC

Gerät für aufsteigenden Dünnschichtverdampfer, computergesteuert (PC)

The objective of evaporation is to concentrate a non-volatile solute, carrying out the elimination of a volatile compound. Water is the volatile compound used in most evaporations.The rising or falling film evaporators are very useful if high...

SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF

Available

7.3.2.1.- MECHANISCHE TESTS

MMF

Gerät für Biegemoment und Scherkraft

The Shear Force and Bending Momentum Unit, "MMF", unit is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the application of one...

Available

3.3.- ANGEWANDTE KOMMUNIKATION

EBL

Gerät für Bluetooth

The Bluetooth Unit, "EBL", operates in conjunction with a computer, which is connected with the Bluetooth Dongle, that allows communicating and programming the Bluetooth Devices to perform a simple Bluetooth network.The two Bluetooth Devices...

CHARPY AND IZOD IMPACT TESTING UNIT - EEICI

EEICI

Available

7.3.2.1.- MECHANISCHE TESTS

EEICI

Gerät für Charpy- und Izod-Schlagprüfungen

The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...

COMPUTER CONTROLLED CRACKING COLUMN - QCCC

QCCC

Available

11.1.4.- DISTILLATION AND CRACKING

QCCC

Gerät für Crack-Säule, computergesteuert (PC)

The Computer Controlled Cracking Column, "QCCC", for cracking and distilling oil is a complete lab tool that allows to the students to carry out a cracking reaction, and the study and the control of different variables that condition it. Also, the...

COMPUTER CONTROLLED VAPOUR-COMPRESSION REFRIGERATION UNIT - TRCVC

TRCVC

Available

9.4.- KÜHLUNG

TRCVC

Gerät für Dampfkompressionskühlung, computergesteuert (PC)

The Computer Controlled Vapour-Compression Refrigeration Unit, "TRCVC", allows the understanding of the vapor-compression refrigeration process by changing the operation of the different parts of the process, and to study the response of the...

COMPUTER CONTROLLED STEAM MOTOR AND ENERGY CONVERSION UNIT - TSMEC

TSMEC

Available

9.8.- THERMISCHE MASCHINEN

TSMEC

Gerät für Dampfmotor und Energieumwandlung, computergesteuert (PC)

The process starts when water is impelled by a computer controlled pump from a storage tank to a computer controlled water boiler, where it is transformed into steam. The boiler is made up of heating elements, whose power is measured and...

COMPUTER CONTROLLED UNIT TO STUDY FLOW THROUGH PACKED COLUMNS - FPCC

FPCC

Available

11.1.8.- ABSORPTION AND ADSORPTION

FPCC

Gerät für das Studium des Flusses in Füllstoffsäulen, computergesteuert (PC)

The main element of the "FPCC" unit is a transparent packed column, which can be used with water, air or both fluids, simulating an absorption column. When working with water, the unit includes a computer controlled speed pump to impel the water...

UNIT FOR THE STUDY OF POROUS BEDS IN VENTURI TUBES (DARCY´S EQUATION) - FME24

FME24

Available

8.1.8.- HYDRAULISCHE ROHRE

FME24

Gerät für das Studium von porösen Betten in Venturi-Rohren (Darcy-Gleichung)

The Unit for the Study of Porous Beds in Venturi Tubes (Darcy´s Equation), "FME24", designed by EDIBON, for the study of porous beds in Venturi tubes (Darcy's Equation), allowing the complete and detailed understanding of this equation.The unit is...

EBDB

Available

5.3.7.- BIOKRAFTSTOFFE

EBDB

Gerät für den Biodieselprozess

The process carried out by the Biodiesel Process Unit, "EBDB", consists on transforming the fatty acids contained in vegetable oils into a high energy content biofuel.Basically, the process consists of two well-defined stages:Stage I: Mixing the...

COMPUTER CONTROLLED BIODIESEL PROCESS UNIT - EBDC

EBDC

Available

5.3.7.- BIOKRAFTSTOFFE

EBDC

Gerät für den Biodieselprozess, computergesteuert (PC)

The process carried out by the Computer Controlled Biodiesel Process Unit, "EBDC", consists of the transformation of the fatty acids from vegetable oils into a biofuel of high energetic power.The process basically consists of two well-defined...

EBEB

Available

5.3.7.- BIOKRAFTSTOFFE

EBEB

Gerät für den Bioethanolprozess

The Bioethanol Process Unit (EBEB) has been designed to study and control the bioethanol production process on a laboratory scale. This unit allows to monitor and examine all the important processes, from liquefaction and saccharification of the...

COMPUTER CONTROLLED BIOETHANOL PROCESS UNIT - EBEC

EBEC

Available

5.3.7.- BIOKRAFTSTOFFE

EBEC

Gerät für den Bioethanolprozess, computergesteuert (PC)

The Computer Controlled Bioethanol Process Unit, "EBEC", has been designed to study and control the bioethanol production process on a laboratory scale. This unit allows to monitor and examine all the important processes, from liquefaction and...

EBGB

Available

5.3.7.- BIOKRAFTSTOFFE

EBGB

Gerät für den Biogasprozess

The Biogas Process Unit, "EBGB", is supplied with two packed anaerobic digesters. In this way, the user can work either in only one stage or in two stages, separating the different phases of the digestion process (the processes of hydrolysis,...

COMPUTER CONTROLLED BIOGAS PROCESS UNIT - EBGC

EBGC

Available

5.3.7.- BIOKRAFTSTOFFE

EBGC

Gerät für den Biogasprozess, computergesteuert (PC)

The Computer Controlled Biogas Process Unit, "EBGC", is supplied with two packed anaerobic digesters. In this way, the user can work either in only one stage or in two stages, separating the different phases of the digestion process (the processes...

EBMB

Available

5.3.7.- BIOKRAFTSTOFFE

EBMB

Gerät für den Biomasseprozess

The main element of the unit is the biomass boiler, which will heat the water that will flow through the other components transferring its heat.The boiler is a biomass boiler of 16 kW that works with pellet and other granulated fuels. The body of...

COMPUTER CONTROLLED BIOMASS PROCESS UNIT - EBMC

EBMC

Available

5.3.7.- BIOKRAFTSTOFFE

EBMC

Gerät für den Biomasseprozess, computergesteuert (PC)

COMPUTER CONTROLLED ORGANIC RANKINE CYCLE UNIT - TORC

TORC

Available

5.3.10.- DAMPFTURBINEN UND ORGANIC RANKINE CYCLES

TORC

Gerät für den organischen Rankine-Zyklus, computergesteuert (PC)

The Computer Controlled Organic Rankine Cycle Unit, "TORC", allows the student to study the complete process and the components of an organic Rankine Cycle, as well as the main variables that take part in the process. The working fluid (coolant...

COMPUTER CONTROLLED BIOMEDICAL DIAGNOSIS AND AUDITORY UNIT - BIADC

BIADC

Available

14.3.- BIOMEDIZINISCHE AUSRÜSTUNG

BIADC

Gerät für Diagnose und Audiometrie in der Biomedizin, Computergesteuert (PC)

The Computer Controlled Biomedical Auditory Diagnostic Teaching Unit, "BIADC", allows the students to analyse the audiograms corresponding to individuals with different audition levels, in order to diagnose possible hearing impairments.The...

COMPUTER CONTROLLED AUTOMOBILE AIR CONDITIONING UNIT - TAAUC

TAAUC

Available

9.2.- HEIZUNG, BELÜFTUNG, KLIMAANLAGE UND HEISSES WASSER

TAAUC

Gerät für die Klimaanlage eines Autos, computergesteuert (PC)

The objective of the Computer Controlled Automobile Air Conditioning Unit, "TAAUC", designed by EDIBON, is to introduce the student into the complex world of air conditioning systems, as well as to study and determine the optimum parameters for...

MBLU

Available

7.1.2.1.- MECHANISMEN

MBLU

Gerät für die Kopplung von Stäben

The Bar Linkages Unit "MBLU" allows many experiments using different arrangements of their parts.The "MBLU" unit includes a selection of more than twenty perforated bars of different lengths and pivots or "joints" to allow students to configure...

PIPES, VALVES AND FITTINGS ASSEMBLY UNIT - PVFA

PVFA

Available

8.9.3.- INSTALLATIONS- UND WARTUNGSPRAXIS

PVFA

Gerät für die Montage von Rohrleitungen, Ventilen und Zubehör

The Pipes, Valves and Fittings Assembly Unit, "PVFA", designed by EDIBON, consists of a solid and rigid U-shaped frame where a series of real pipes and fittings are mounted to form a complete hydraulic system. A filter, a sight glass and a...

COMPUTER CONTROLLED HOT WATER PRODUCTION AND HEATING TEACHING UNIT - EACC

EACC

Available

9.2.- HEIZUNG, BELÜFTUNG, KLIMAANLAGE UND HEISSES WASSER

EACC

Gerät für die Produktion von Warmwasser und Heizsystemen, computergesteuert (PC)

The main element of the Computer Controlled Hot Water Production and Heating Teaching Unit, "EACC", is the boiler. Its function is the heating of the water that will flow through the other elements transferring its heat. It is a low temperature...

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS