Verkaufshits

541 - 570 von 909 Artikel(n)

COMPUTER CONTROLLED CRITICAL SPEED INVESTIGATION UNIT - MVCC

MVCC

Available

7.1.4.- VIBRATIONEN UND OSZILLATIONEN

MVCC

Gerät zur Untersuchung der kritischen Geschwindigkeit, computergesteuert (PC)

Some phenomena that appear in mechanical systems, such as vibration, self-centering and resonance in rotary shafts, can be clearly demonstrated with the Computer Controlled Critical Speed Investigation Unit, "MVCC".The operation of the "MVCC" unit...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF POWER ELECTRONICS (WITH IGBTS) - TECNEL

TECNEL

Available

6.1.2.2.- LEISTUNGSELEKTRONIK UND INDUSTRIELLE ELEKTRONIK

TECNEL

Gerät zur Untersuchung der Leistungselektronik (mit IGBTs), computergesteuert (PC)

The Computer Controlled Teaching Unit for the Study of Power Electronics (with IGBTS), "TECNEL" is a unit with Computer Control and Data Acquisition System designed to study the basis of Power Electronics. It allows students to study AC/DC, DC/AC,...

UNIT FOR STUDYING METHODS TO DETERMINE THE ELASTIC LINE - MDLE

MDLE

Available

7.1.6.- STRUKTURMECHANIK

MDLE

Gerät zur Untersuchung der Methoden zur Bestimmung der elastischen Linie

The Unit for studying Methods to Determine the Elastic Line, "MDLE", consists of set of beams, several supports (with clamp fixing and dial gauges, and with force gauge), a device to generate a bending moment, fixed pulleys, dial gauges and a set...

COMPUTER CONTROLLED UNIT TO STUDY WATER FLOW PRINCIPLES - WFPC

WFPC

Available

8.4.- FLUSSVISUALISIERUNG

WFPC

Gerät zur Untersuchung der Prinzipien des Wasserflusses, computergesteuert (PC)

The Computer Controlled Unit to Study Water Flow Principles, "WFPC", is composed by both a closed and an open water circuit, thus allowing the observation of fluid's behavior in each of them. The selection of the circuit can be made by means of a...

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MEF

Gerät zur Untersuchung der Reibung

The Friction Study Unit, "MEF", allows the unit to illustrate the friction force by simple demonstrations.It is designed for the study of the relations between friction forces and normal forces, between hard or soft surfaces, between lubricated or...

UNIT FOR STUDYING BEARING FRICTION - MBF

Available

7.1.5.- TRIBOLOGIE (REIBUNG, TRAGUNG, SCHMIERUNG)

MBF

Gerät zur Untersuchung der Reibung in Lagern

The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...

MEER

Available

7.1.4.- VIBRATIONEN UND OSZILLATIONEN

MEER

Gerät zur Untersuchung der Rotation von Wellen

The Whirling of Shafts Unit, "MEER", has been designed by EDIBON to demonstrate and determine different modes of oscillation and resonance of shafts with continuous distribution of mass under different conditions.The operation of the Whirling of...

USSB

Available

8.3.- HYDROSTATIK

USSB

Gerät zur Untersuchung der Stabilität von Schiffen

The study of ship stability and the analysis of vibrations that can occur in a vessel are crucial aspects for the construction and development of naval engineering.The Ship Stability Study Unit, "USSB", designed by EDIBON, enables a comprehensive...

COMPUTER CONTROLLED THERMAL CONDUCTIVITY OF LIQUIDS AND GASES UNIT - TCLGC

TCLGC

Available

9.6.- WÄRMEÜBERTRAGUNG

TCLGC

Gerät zur Untersuchung der Wärmeleitfähigkeit (Flüssigkeit-Gas), computergesteuert (PC)

The Computer Controlled Thermal Conductivity of Liquids and Gases Unit, "TCLGC", has been designed by EDIBON to allow the students to appreciate and understand the heat transfer process through any gas or liquid locked in a solid.By the...

MFCE

Available

7.1.3.- STATIK UND DYNAMIK

MFCE

Gerät zur Untersuchung der Zentrifugalkraft

The Centrifugal Force Unit, "MFCE", is used to demonstrate the relationship between centrifugal force, rotational speed, mass of a rotating body and distance from the axis. The unit consists of a vertical axis of rotation and a rotating arm....

UNIT TO STUDY THE PRESSURE DROP OF COMPRESSIBLE FLUIDS IN PIPES - PDCFP

PDCFP

Available

8.8.- FLÜSSIGKEITSLEITUNGSSYSTEM

PDCFP

Gerät zur Untersuchung des Druckverlustes von kompressiblen Flüssigkeiten in Rohrleitungen

The Unit to Study the Pressure Drop of Compressible Fluids in Pipes, "PDCFP", allows the study of the compressible fluid pressure drop, for example the air of a compressor, and the different flow conditions (laminar and turbulent) thanks to the...

MELH

Available

7.1.3.- STATIK UND DYNAMIK

MELH

Gerät zur Untersuchung des Hooke'schen Gesetzes

The Unit for studying Hooke's Law, "MELH", designed by EDIBON, demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring –...

MFLT

Available

7.3.2.1.- MECHANISCHE TESTS

MFLT

Gerät zur Untersuchung des Knickens von Stäben

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...

HECA

Available

8.8.- FLÜSSIGKEITSLEITUNGSSYSTEM

HECA

Gerät zur Untersuchung des Luftstroms

The Air Flow Studies Unit, "HECA", is a floor standing unit that allows to measure different characteristics of air distribution systems and to demonstrate certain basic principles of fluid mechanics in ducts and jets.The unit is mounted on a...

UNIT FOR STUDYING EQUILIBRIUM OF MOMENTS ON A TWO ARM LEVER - MEMB2

MEMB2

Available

7.1.3.- STATIK UND DYNAMIK

MEMB2

Gerät zur Untersuchung des Momentengleichgewichts an einem Zweiarmhebel

The Unit for studying Equilibrium of Moments on a Two Arm Lever,"MEMB2", allows to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.A pivoted beam in the extreme of a vertical support...

Available

7.1.3.- STATIK UND DYNAMIK

SRI

Gerät zur Untersuchung des Rotations-Trägheitsmoments

The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...

Available

11.1.12.- SOLIDS TREATMENT

QMS

Gerät zur Untersuchung des Umgangs mit Feststoffen

The Solids Handling Study Unit "QMS" is designed to introduce the students in different aspect of solids behaviour, unit operations as size reduction, mixing, transport, discharge, weighing, etc. The unit consists of a bench on which are mounted...

MEAL

Available

7.1.3.- STATIK UND DYNAMIK

MEAL

Gerät zur Untersuchung und Analyse von Nocken

The Cam Analysis Unit "MEAL" allows to observe the effect of the profile of a cam, the study of the displacement, velocity and acceleration profiles of the cam and the identification of the factors that can modify the dynamics of the cam. This...

COMPUTER CONTROLLED ACOUSTIC IMPEDANCE TUBE/ACOUSTIC INSULATION TEST UNIT - TIAC

TIAC

Available

7.3.2.2.- THERMISCHE UND AKUSTISCHE PRÜFUNGEN

TIAC

Gerät zur Untersuchung von akustischer Impedanz/Schallisolierung, computergesteuert (PC)

This unit has been designed to provide students with an easy and simple method for understanding and investigating the relative acoustic properties of several materials. It demonstrates acoustic attenuation of a range of building materials as...

PERMEABILITY/FLUIDISATION STUDIES UNIT - PEFP

PEFP

Available

11.1.1.- FLUIDIZATION

PEFP

Gerät zur Untersuchung von Fluidisierung und Durchlässigkeit

The Permeability/Fluidisation Studies Unit, "PEFP", allows to observe the behaviour of liquid fluidisation in a granular bed. The main element is a permeability meter. It is a transparent cylinder that supports the soil sample to be studied....

UNIT FOR STUDYING FORCES IN A SIMPLE BAR STRUCTURE - MFBS

MFBS

Available

7.1.6.- STRUKTURMECHANIK

MFBS

Gerät zur Untersuchung von Kräften in einer einfachen Stabstruktur (einfachen Fachwerken)

The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...

UNIT FOR STUDYING FORCES IN AN OVERDETERMINATE TRUSS - MFCS2

MFCS2

Available

7.1.6.- STRUKTURMECHANIK

MFCS2

Gerät zur Untersuchung von Kräften in hyperstatischen Fachwerken

The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in the single plane...

UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG

MFPG

Available

7.1.6.- STRUKTURMECHANIK

MFPG

Gerät zur Untersuchung von Kräften in Kranarmen

The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...

UNIT FOR STUDYING FORCES IN DIFFERENT SINGLE PLANE TRUSSES - MFCS1

MFCS1

Available

7.1.6.- STRUKTURMECHANIK

MFCS1

Gerät zur Untersuchung von Kräften in verschiedenen Aufbauten von ebenen Fachwerken

The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the experimental bar forces...

COMPUTER CONTROLLED TEACHING UNIT FOR THE STUDY OF REGULATION AND CONTROL - RYC

Zubehör von RYC/T

Available

6.1.1.1.- THEORETISCH-PRAKTISCHE GRUNDLAGEN

RYC

Gerät zur Untersuchung von Regelung und Steuerung, computergesteuert (PC)

Zubehör von RYC/T

Regulation and control theory is divided into two major divisions in, namely, classical and modern. The implementation of classical controller designs as compared to systems designed using modern control theory is easier and these controllers are...

SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE

MEPE

Available

7.1.6.- STRUKTURMECHANIK

MEPE

Gerät zur Untersuchung von Stabilitätsproblemen

The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...

COMPUTER CONTROLLED TORSIONAL VIBRATION UNIT - MEVTC

MEVTC

Available

7.1.4.- VIBRATIONEN UND OSZILLATIONEN

MEVTC

Gerät zur Untersuchung von Torsionsschwingungen, computergesteuert (PC)

The Computer Controlled Torsional Vibration Unit, "MEVTC", has been designed by EDIBON to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with...

Available

7.2.2.- ZAHNRÄDER, DIFFERENTIALE UND GETRIEBE

MEC

Gerät zur Untersuchung von Überdrehzahl

The Overdrive Unit, "MEC", includes a set of epicyclical gears that represent an application of a simple epicyclic arrangement of the type used in a motor vehicle overdrive.Simple epicyclic set consists of:Sun gear that rotates together with the...

UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3

MFCS3

Available

7.1.6.- STRUKTURMECHANIK

MFCS3

Gerät zur Untersuchung von Verformungen in Fachwerken

The Unit for studying Deformation of Trusses, "MFCS3", allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the experimental forces in the...

COMPUTER CONTROLLED THERMAL RADIATION AND LIGHT RADIATION UNIT - TRTC

TRTC

Available

9.6.- WÄRMEÜBERTRAGUNG

TRTC

Gerät zur Untersuchung von Wärmestrahlung und Lichtstrahlung, computergesteuert (PC)

The Computer Controlled Thermal Radiation and Light Radiation Unit, "TRTC", has been designed to demonstrate the laws of radiant heat transfer and radiant heat exchange. It basically consists in two independent parts. One of the parts is for the...

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS