Verkaufshits

841 - 870 von 909 Artikel(n)

N-EM-MET

Available

6.2.2.4.- STEUERUNG VON ELEKTRISCHEN MASCHINEN

N-EM-MET

Stern-Dreieck Verbindung

The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...

Zubehör von TSTCC

Available

9.6.- WÄRMEÜBERTRAGUNG

TSTCC/CIB

Steuer-Interface-Box für TSTCC (gemeinsam für alle Module des Typs "TXC")

Zubehör von TSTCC

TMSB

Available

9.8.- THERMISCHE MASCHINEN

TMSB

Stirling-Motor

The Stirling Motor, "TMSB", is used to demonstrate the operation of a thermodynamic machine for the conversion of energy. It converts thermal energy into mechanical energy and operates as a motor (heat engine). Additionally it can operate an...

TMSC

Available

5.3.11.- ANDERE NICHTKONVENTIONELLE SYSTEME

TMSC

Stirling-Motor, computergesteuert (PC)

The Computer Controlled Stirling Motor, "TMSC", is used to demonstrate the operation of a thermodynamic machine for the conversion of energy. It converts thermal energy into mechanical energy and operates as a motor (heat engine). Additionally it...

COMPUTER CONTROLLED SUPERSONIC WIND TUNNEL (THREE BLOWERS) - TAS25/100C-3B

TAS25/100C-3B

Available

8.6.- AERODYNAMIK

TAS25/100C-3B

Supersonischer Windkanal (3 Ventilatoren), computergesteuert (PC)

The Computer Controlled Supersonic Wind Tunnel (Three Blowers), "TAS25/100C-3B", is an open wind tunnel for the study of theaerodynamic properties of different drag bodies subject to subsonic and supersonic flows.Airflows through three vacuum...

COMPUTER CONTROLLED SUPERSONIC WIND TUNNEL - TAS25/100C

TAS25/100C

Available

8.6.- AERODYNAMIK

TAS25/100C

Supersonischer Windkanal, computergesteuert (PC)

The Computer Controlled Supersonic Wind Tunnel, "TAS25/100C", is an open wind tunnel for the study of the aerodynamic properties of different drag bodies subject to subsonic and supersonic flows. Air flows through a vacuum pump or blower...

CUTAWAY INDEPENDENT EXCITATION 3PH SYNCHRONOUS MOTOR-GENERATOR - EMT6-S

EMT6-S

Available

4.4.1.- ABSCHNITTLICHE MODELLE

EMT6-S

Synchrone 3PH Generator mit unabhängiger Erregung, Abgeschnitten

It includes a Cut away AC synchronous three-phase motor alternator (EMT6-S) in order to study the different parts of this motor type.

DATA ACQUISITION SYSTEM AND SENSORS - BDAS

BDAS

Available

8.1.7.- HYDRAULISCHE MASCHINEN: TURBINEN

BDAS

System zur Datenerfassung und Sensorik

BDAS is designed to monitor the measurements of each unit type "FME" from a computer (PC).This system can monitor any unit, checking the revolutions given by the water pump or the torque, differential pressures for Bernoulli theorems, pressure...

DIGITAL SYSTEMS AND CONVERTERS KIT - M10/KIT

Zubehör von M-KITS

Available

2.2.- KITS FÜR DIE MONTAGE VON STROMKEISEN

M10/KIT

System- und Digitalwandler-Kit

Zubehör von M-KITS

With Digital Systems and Converters Kit, "M10/KIT", designed by EDIBON, the behaviour of BCD/Binary counters, comparators and analogue integrators can be studied, as well as analogue/digital conversion and viceversa.

SBANC

Available

11.1.7.- DRYING AND COOLING

SBANC

Tablettentrockner, computergesteuert (PC)

The Computer Controlled Tray Drier "SBANC" is a laboratory scale unit designed to study fluid mechanics, surface chemistry, solids structures and mass and energy balances related to the drying process.It consists of a tunnel, several trays where...

PANEL AND COMMON ELEMENTS CASE FOR LIMEBA - MECA/EC

Zubehör von LIMEBA

Available

7.1.1.- MECHANICS FUNDAMENTALS KITS

MECA/EC

Tafel und Koffer mit gemeinsamen Elementen für LIMEBA

Zubehör von LIMEBA

It is the supporting structure where the modules’s elements are mounted in order to undertake the experiments and hence, the basepanel is necessary along with any module.The panel is pierced with equidistant holes that help students to take...

COMPUTER CONTROLLED THERMO-ELECTRIC HEAT PUMP - TBTC

TBTC

Available

5.3.11.- ANDERE NICHTKONVENTIONELLE SYSTEME

TBTC

Thermoelektrische Wärmepumpe, computergesteuert (PC)

The Computer Controlled Thermo-Electric Heat Pump, "TBTC", allows the study of different phenomena in which heat and electricity take place (Thermoelectricity).Some of them are the Peltier effect, the Thomson or Lenz effect and the Seebeck effect....

TTEB

Available

11.1.7.- DRYING AND COOLING

TTEB

Tisch-Kühlturm

The Bench Top Cooling Tower, "TTEB", includes a pump that impels hot water from the tank (with level switch and heating element) to the manifolds located at the top of the cooling tower. Water flow can be adjusted by a manual needle valve.A...

COMPUTER CONTROLLED BENCH TOP COOLING TOWER - TTEC

TTEC

Available

11.1.7.- DRYING AND COOLING

TTEC

Tischkühlturm, computergesteuert (PC)

The Computer Controlled Bench Top Cooling Tower, "TTEC", includes a pump that impels hot water from a tank (with level switch and heating element) to the manifolds located at the top of the cooling tower. Water flow can be adjusted by a manual...

Available

14.2.1.5.- INSTRUMENTATION & KONTROLLE

M48

Tonmessungen

With the Sound Measurement Unit, "M48", designed by EDIBON, different practices related to sound measurements can be carried out. The unit has three different types of components: two types of microphones and a loudspeaker.

PFGA

Available

9.9.- VERBRENNUNGSMOTOREN

PFGA

Tragbarer Verbrennungsgasanalysator

The PFGA unit is a flue gas analyzer stored in a portable case. It is used to check the existence of O2, CO, CO2 and nitrogen oxides in the flue gases from home heating systems with simultaneous measurement of the flue gases temperature and the...

MEGE

Available

7.3.1.- FOTOELASTIZITÄT UND STRAIN-MESSUNG

MEGE

Trainingsgerät für Dehnungsmessstreifen

The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...

HYDRAULIC RADIATOR BALANCING TRAINING UNIT - THBT

THBT

Available

9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS

THBT

Trainingsgerät für den hydraulischen Abgleich von Heizkörpern

The Hydraulic Radiator Balancing Training Unit, "THBT", allows the study of the amount of water with which to guarantee that all the radiators of an installation are supplied with sufficient hot water.The hydraulic balancing is carried out by...

TCPT

Available

9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS

TCPT

Trainingsgerät für Kreiselpumpen

The Circulating Pumps Training Unit, "TCPT", designed by EDIBON, is an advanced tool designed to facilitate the study and understanding of the operation of circulation pumps in heating systems and sanitary techniques. This unit allows...

TEMPERATURE MEASUREMENT TRAINING UNIT - TEMT

TEMT

Available

9.10.3.- INSTALLATIONS- UND WARTUNGSPRAXIS

TEMT

Trainingsgerät für Temperaturmessungen

The Temperature Measurement Training Unit, "TEMT", allows to compare the response of several devices to measure the temperature for different flows and different installation position of these devices.The unit includes four different measuring...

Available

9.2.- HEIZUNG, BELÜFTUNG, KLIMAANLAGE UND HEISSES WASSER

WHT

Trainingsgerät für Warmwasserbereiter

The Water Heater Training Unit, "WHT", allows demonstrating the operation of three types of water heaters. The unit has three heaters, two of them commercial one with electronic ignition and one in millivolt, and a residential gas heater without...

TICB

Available

9.7.- WÄRMETAUSCHER

TICB

Trainingssystem für Wärmetauscher

Heat exchangers are widely used in refrigeration, air conditioning, heating, energy generation, chemical processing, etc. They have many applications in engineering and, as a consequence, there are many models adapted to each application to obtain...

COMPUTER CONTROLLED HEAT EXCHANGERS TRAINING SYSTEM - TICC

TICC

Available

9.7.- WÄRMETAUSCHER

TICC

Trainingssystem für Wärmetauscher, computergesteuert (PC)

The Computer Controlled Heat Exchangers Training System, "TICC", has been designed by EDIBON to study and compare different types of small-scale heat exchangers working with parallel or counterflow arrangements.The minimum supply consists of two...

Zubehör von QRQC

Available

11.2.- CHEMISCHE REAKTOREN

QRFT

Turbinenreaktor

Zubehör von QRQC

The Tubular Flow Reactor, "QRFT," specifically designed by EDIBON, is intended for the kinetic study of liquid-liquid homogeneous reactions. This unit allows for a wide range of practices, including the determination of kinetic equations, the...

Zubehör von QR

Available

11.2.- CHEMISCHE REAKTOREN

QRT

Turbinenreaktor für QR

Zubehör von QR

The Tubular Flow Reactor for QR, "QRT", has been designed by EDIBON to conduct the kinetic study of homogeneous liquid-liquid reactions.In this unit, a continuous stream of reactants is passed through, which mix and react as they flow through the...

COMPUTER CONTROLLED TUBULAR FLOW REACTOR FOR QRC - QRTC

Zubehör von QRC

Available

11.2.- CHEMISCHE REAKTOREN

QRTC

Turbinenreaktor für QRC, computergesteuert (PC)

Zubehör von QRC

The Computer Controlled Tubular Flow Reactor for QRC, "QRTC", has been designed by EDIBON to conduct the kinetic study of homogeneous liquid-liquid reactions. In this unit, a continuous stream of reactants is passed through, which mix and react as...

TURBULENT FLOW HEAT EXCHANGER FOR TICC - TIFT

Zubehör von TICC

Available

9.7.- WÄRMETAUSCHER

TIFT

Turbulenz-Wärmetauscher für TICC

Zubehör von TICC

Heat exchangers with turbulent flow are widely used in various industries such as chemical, food, pharmaceutical, and energy generation. These devices play a fundamental role in heating and cooling fluids, as well as in cooling systems for...

FÜR WEITERE INFORMATIONEN, KONTAKTIEREN SIE UNS