SCE Computer Controlled Generating Stations Control and Regulation Simulator

2.4.1.- INSTRUMENTATION & CONTROL 6.1.1.1.- THEORETICAL-PRACTICAL FUNDAMENTALS 10.1.- THEORETICAL - PRACTICAL FUNDAMENTALS
COMPUTER CONTROLLED GENERATING STATIONS CONTROL AND REGULATION SIMULATOR - SCE

Unit: SCE. Computer Controlled Generating Stations Control and Regulation Simulator

INNOVATIVE SYSTEMS

The SCE equipment designed by EDIBON allows to study the modeling and simulation process of the electrical generation of a power plant as well as the verification of the model against the real system.

See general description

Expansions

ICAI

Interactive Computer Aided Instruction Software
FSS

Fault Simulation System
PLCHMI

IIoT local/remote Control and Monitoring with HMI
ELK

EDIBON Software Development KIT, Powered by NI LabVIEW™
EMAK

EDIBON Matlab Kit
ECR

EDIBON Industrial Modular System with NI CompactRIO
ESN

EDIBON Scada-Net
ECL

EDIBON Cloud Learning

Laboratories

5RTV
 Technical and Vocational Education Renewable Energy Laboratory
5RHE
 Higher Education Renewable Energy Laboratory
6TV
 Mechatronics and Automation Laboratory for Technical and Vocational Education
6HE
 Mechatronics and Automation Laboratory for Higher Education

RELATED NEWS

EDIBON and its commitment to European Skills
EDIBON and its commitment to European Skills
At EDIBON, we are committed to strengthening skills as a strategic pillar for the competitiveness and social well-being of the European Union. Proper training not only boosts the economy but also enables individuals to fully participate in society and democracy.
Read more
Completion of the Small Laboratory Equipment Repair Course
Completion of the Small Laboratory Equipment Repair Course
On December 1st, the Repair Course for Small Laboratory Equipment, taught by our engineers at the EDIBON facilities, was completed, lasting 4 days. The attendees, (Laboratory technicians and maintenance of the Rey Juan Carlos University of Madrid) had the opportunity to perform multiple...
Read more
Completion of the Course of Instrumentation, Regulation and Control in Laboratories
Completion of the Course of Instrumentation, Regulation and Control in Laboratories
On October 19th, the Course on Instrumentation, Regulation and Control in Laboratories, taught by our engineers in these facilities, using EDIBON units, was completed and aimed at learning the control of the conditions of a laboratory process. The attendants, (12 laboratory technicians and...
Read more

General Description

Unit designed to simulate the regulation behaviour of a hydroelectric generating station, as a didactic application with different aspects ofregulation, control and simulation.

It is possible to work with this unit in 2 ways:

  • REAL mode (continuous or transient analysis).
  • SIMULATED mode.

The unit consists mainly of an interface for the conditioning of input and output signals. For its part, this one will be connected to thecomputer (through a SCSI wire and a data acquisition board) and to the two subsystems that we try to control:

  • Gate subsystem.
  • Turbine-generator subsystem.

The unit has (in the interface) some switches to establish different loads to the generator output and different conditions of the real system.This Computer Controlled Unit is supplied with the EDIBON Computer Control System (SCADA), and includes: The unit itself + a DataAcquisition Board + Computer Control, Data Acquisition and Data Management Software Packages, for controlling the process and allparameters involved in the process.

Exercises and guided practices

GUIDED PRACTICAL EXERCISES INCLUDED IN THE MANUAL

  1. Modelization of the motor as a standard motor.
  2. Modelization of the motor with the constants corrections of themathematical model.
  3. Calculation of the dynamos speed constant.
  4. Obtaining of the transient responses of the gate motor.
  5. Obtaining of the transient response of the turbine motor.
  6. Obtaining of the transient response of the gate simulated motor.
  7. Obtaining of the transient response of the turbine simulatedmotor.
  8. Comparative analysis of the transient response of the turbinereal motor vs the transient response of the simulated motor forresistive load.
  9. Comparative analysis of the transient response of the turbinereal motor vs the transient response of the simulated motor forcapacitive load.
  10. Comparative analysis of the transient response of the turbinereal motor vs the transient response of the simulated motor forinductive load.
  11. Comparative analysis of the response of the gate real motorvs the response of the gate simulated motor for continuous(manually from the computer) control signals.
  12. Comparative analysis of the response of the gate real motor vsthe response of the gate simulated motor for sinusoidal controlsignals.
  13. Comparative analysis of the response of the gate real motorvs the response of the gate simulated motor for square controlsignals.
  14. Comparative analysis of the response of the gate real motor vsthe response of the gate simulated motor for triangular controlsignals.
  15. Comparative analysis of step response between real motor andsimulated motor (gate or turbine).

MORE PRACTICAL EXERCISES TO BE DONE WITH THE UNIT

  1. Many students view results simultaneously. To view all results in real time in the classroom by means of aprojector or an electronic whiteboard.
  2. Open Control, Multicontrol and Real Time Control. This unit allows intrinsically and/or extrinsically to change the span, gains: proportional, integral, derivative parameters, etc. in real time.
  3. The Computer Control System with SCADA allows a real industrial simulation.
  4. This unit is totally safe as uses mechanical, electrical/electronic, and software safety devices.
  5. This unit can be used for doing applied research.
  6. This unit can be used for giving training courses to Industrieseven to other Technical Education Institutions.
  7. Several other exercises can be done and designed by the user.

Quality

AFTER-SALES SERVICE

Ask for information