Asia

Customer:
UNIVERSITY OF HONG KONG (HKU), HONG KONG

Departament:
Department of Mechanical Engineering

Description:
Installation and Training of units belonging to the area of Energy

Client:
INDIAN INSTITUTE OF TECHNOLOGY ROORKEE, IITR

Departament:
DEPARTAMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING

Description:
We have successfully installed the Computer Controlled Liquid Mass Transfer and Diffusion Unit, “QDTLC.” This cutting-edge equipment enables students to deepen their understanding of liquid mass transfer and diffusion processes, allowing them to apply theoretical knowledge in a hands-on, practical environment. With this new unit, students will be able to enhance their learning experience and gain valuable skills through real-world applications.

Client:
INDIAN INSTITUTE OF TECHNOLOGY GANDHINAGAR, IIT GANDHINAGAR

Description:
Our engineering team has successfully completed the installation of advanced equipment at IIT Gandhinagar, India. The installations include the Control Interface for Heat Transfer Series “TSTCC/CIB”, the Unsteady State Heat Transfer Module “TXC/EI”, and the Radiation Heat Transfer Module “TXC/RC”. We extend our sincere thanks to the Mechanical Engineering Department for their warm welcome and support during this project.

PDF

Client:
INDIAN INSTITUTE OF TECHNOLOGY BOMBAY, IIT BOMBAY

Department:
DEPARTMENT OF CHEMICAL ENGINEERING

Description:
We have successfully completed the installation and training of advanced units in the area of Fluid Mechanics. These cutting-edge units are designed to provide students and researchers with a comprehensive understanding of fluid dynamics, flow behavior, and related phenomena. The hands-on training sessions ensured that faculty and students are fully equipped to utilize this equipment effectively, enhancing their practical skills and deepening their theoretical knowledge. This installation represents a significant enhancement to the educational resources available in the field of Fluid Mechanics, empowering the next generation of engineers and scientists to excel in their studies and research.

PDF

Client:
INDIAN INSTITUTE OF TECHNOLOGY OF ROORKEE, IITR ROORKEE

Department:
DEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING

Description:
The successful installation of the Computer Controlled Bench Top Cooling Tower “TTEC” in the Mechanical and Industrial Engineering department at the Indian Institute of Technology marks a significant enhancement to their educational resources. This state-of-the-art unit will provide students with invaluable hands-on experience, allowing them to explore the design, construction, and operational characteristics of modern water evaporation cooling systems. We are confident that this equipment will greatly enrich their learning experience.

PDF

Client:
NATIONAL INSTITUTE OF TECHNOLOGY TIRUCHIRAPPALLI, NITT

Department:
DEPARTMENT OF MECHANICAL ENGINEERING

Description:
We have successfully completed the installation and training of advanced equipment in the area of Energy. This equipment is specifically designed to enhance students' and researchers' understanding of energy systems, providing hands-on experience with the latest technologies. This installation significantly bolsters the institution's capabilities in delivering high-quality education and research in the field of energy, empowering the next generation of professionals to address the challenges of the evolving energy landscape.

PDF

Client:
ANNA UNIVERSITY, COIMBATORE

Department:
DEPARTMENT OF MECHANICAL ENGINEERING

Description:
We successfully completed the installation and training of equipment in the areas of Energy, Fluid Mechanics, and Thermodynamics, along with the EDIBON SCADA Net System “ESN.” This advanced solution is designed to provide comprehensive hands-on learning experiences, enabling students and researchers to gain deeper insights into these critical engineering fields. The integration of the SCADA Net System further enhances the capabilities of the lab, allowing for real-time data monitoring and control across multiple units.

PDF

Client:
INDIAN INSTITUTE OF TECHNOLOGY HYDERABAD, ITTH

Department:
DEPARTMENT OF CIVIL ENGINEERING

Description:
Installation and Training of units belonging to the area of Environment

PDF

Client:
C.V. RAMAN COLLEGE OF ENGINEERING (CVRCE), BHUBANESHWAR

Department:
DEPARTMENT OF CIVIL ENGINEERING

Description:
We are proud to support your training in the area of Fluid Mechanics with advanced equipment such as the Fluid Friction in Pipes Unit “AFT/P” with Hydraulics Bench, as well as the Basic Data Acquisition System and Sensors designed for use with the EDIBON FME series. Thank you for the warm hospitality!

Client:
POLITEKNIK NEGERI BATAM, POLIBATAM

Description:
We have successfully installed advanced equipment in the Smart Grids and Power Systems area.

This includes the Computer Controlled Smart Grids Application, “AEL-BSGC,” which is specifically designed to provide in-depth study of Smart Grids across the generation, transmission, distribution, and load consumption sectors. Additionally, we have installed the Gas Power Plants Simulator, “PSV-GSPP-SOF,” a sophisticated software solution that educates users on the fundamental principles of Brayton cycle gas turbine power plants. The simulator offers a detailed and interactive exploration of the elements and parameters involved in the generation process, illustrating their interrelationships through integrated mathematical models.

Client:
POLITEKNIK NEGERI UJUNG PANDANG, PNUP

Description:
Through this collaboration, students and faculty now have access to the advanced Air-cooled 4-Stroke 1-Cylinder Gasoline and Diesel Engine for TBMC12. These state-of-the-art solutions will enhance teaching and learning by providing invaluable hands-on experiences in the field of internal combustion engines. This flexibility facilitates comprehensive or specific studies of various aspects of energy systems, smart grids, and power systems.

Client:
POLITEKNIK ATI MAKASSAR, ATIM

Description:
We have carried out the installation of equipment related to the technical areas of process control and chemical engineering in Politeknik ATI Makassar University, Indonesia. With this new equipment, students and professors will be able to continue learning, improving and putting into practice the acquired knowledge.

Client:
POLITEKNIK ELEKTRONIKA NEGERI SURABAYA, PENS

Description:
We are pleased to announce the successful installation of advanced Heat Exchanger equipment, along with the High Power Synchronous Generators Application, "AEL-HPSG." This state-of-the-art equipment, focused on thermotechnics and thermodynamics, provides professors with powerful tools to help students grasp complex concepts through practical, hands-on learning. We appreciate this collaboration and are confident that these resources will significantly enhance the educational experience.

Client:
POLITEKNIK ELEKTRONIKA NEGERI SURABAYA, PENS

Description:
We had the privilege of installing our cutting-edge equipment at the Department of Electricity and Energy. With the addition of the Computer Controlled Organic Rankine Cycle Unit, “TORC”, and the Industrial Process Control via PLC, students are now equipped to deepen their understanding of these critical technologies. This installation ensures that they can continue to advance their learning with practical, real-world applications.

Client:
UNIVERSITAS MALIKUSSALEH

Description:
Installation and training of advanced solutions tailored to the Energy sector. These state-of-the-art systems provide students and faculty with innovative ways to explore and understand the complexities of energy technologies, ensuring a robust and practical learning experience.

PDF

Client:
SEKOLAH TINGGI ILMU PELAYARAN (STIP JAKARTA), JAKARTA

Department:
SCHOOL OF ENGINEERING

Description:
We have successfully installed our Advanced Mechanical, Electrical, and Smart Grid Power Systems (Utilities), “APS12”. This cutting-edge system is capable of simulating any electrical phenomenon found in real power grids, including short circuits, overcurrents, overvoltages, and frequency deviations. Technicians will fully explore and benefit from the extensive learning opportunities this equipment offers in the fields of energy and electricity.

PDF

Client:
UNIVERSITAS HASANUDDIN (UNHAS)

Department:
DEPARTMENTS OF ELECTRICITY, MECHANICS & RENEWABLE ENERGIES

Description:
We have installed our Advanced Mechanical, Electrical and Smart Grid Power Systems (Utilities), “APS12”, able to reproduce any electric phenomenon which is present in real power systems, such as short circuits, over currents, over voltages, over frequencies, etc. We are confident that students, guided by their teachers, will know how to enjoy and take advantage of what this equipment can teach them about energy and electricity.

PDF

Client:
POLITEKNIK NEGERI MEDAN, POLMED

Department:
DEPARTMENT OF ENERGY CONVERSION

Description:
Installation and Training of units belonging to the area of Energy

PDF

Client:
POLITEKNIK ELEKTRONIKA NEGERI SURABAYA UNIVERSITY

Department:
Department of Energy Generation

Description:
We have successfully installed the Computer Controlled Photovoltaic Solar Energy Unit, “EESFC” and the Computer Controlled Wind Energy Unit, “EEEC”. It was a pleasure to collaborate with such a highly skilled team, and we are confident that these advanced systems will greatly enhance the learning experience for students and faculty alike.

PDF

Customer:
THE AMERICAN UNIVERSITY OF IRAQ, SULAIMANI

Department:
Engineering department

Description:
Installation and Training of units belonging to the areas of Fluid Mechanics (Channels) and Aerodynamics (Tunnels))

PDF

Customer:
KOYA UNIVERSITY, KOYA

Department:
Faculty of Engineering

Description:
Installation and Training of units belonging to the area of Energy

Client:
AL- BALQA’ APPLIED UNIVERSITY, BAU

Description:
We installed and provided training to teachers using our Sedimentation, Precipitation, and Flocculation Unit, “SPFB”, which enables in-depth study of the physicochemical processes involved in wastewater treatment. Additionally, we installed our Sedimentation Tank, “PDS”, specifically designed to demonstrate the sedimentation process. This equipment helps educators familiarize themselves with the principles of discrete particle sedimentation as they settle in a tank.

Client:
AL HUSSEIN TECHNICAL UNIVERSITY

Description:
We proudly installed the state-of-the-art Computer Controlled Wind Energy Unit, “EEEC”, and the Computer Controlled Thermal Solar Energy Unit, “EESTC”. This cutting-edge equipment is designed to empower future engineers, equipping them with the advanced tools and knowledge necessary to excel in the rapidly evolving fields of renewable energy. Our commitment is to support their educational journey and help them achieve their goals.

Client:
AL-ISRA UNIVERSITY

Department:
RENEWABLE ENERGY ENGINEERING

Description:
The renewable energy engineering department of the Isra University has fantastic students and that is why we are very proud and happy about our installation. The equipment that they can now enjoy to continue training are the Wind Energy UnitEquipos, “EEE”, the Kit of Conversion and Consumption Simulation “EE-KIT” and the Grid Connection Inverter “Kit EE-KIT2”.

Client:
AL- BALQA’ APPLIED UNIVERSITY, BAU

Description:
We are very pleased to continue with our expansion and installation of equipment in different universities. The students will be able to continue learning with the Brinell, Vickers & Rockwell Hardness Testing Unit, “EBVR”, that allows determining strength of materials and the Coriolis Force Demonstration Unit, “MDFC.

PDF

Client:
GERMAN JORDANIAN UNIVERSITY, GJU

Department:
DEPARTMENT OF ENERGY AND MECHANICAL ENGINEERING

Description:
We successfully completed the installation and provided comprehensive training on advanced equipment within the field of Thermodynamics. This equipment is designed to enhance both the theoretical understanding and practical skills of those involved, ensuring that participants are well-equipped with the knowledge necessary to excel in this critical area of study. Our commitment to delivering high-quality education tools underscores our dedication to supporting academic excellence and fostering innovation in Thermodynamics.

Customer:
PUBLIC AUTHORITY FOR APPLIED EDUCATION AND TRAINING, PAAET

Description:
In this case the Computer Controlled Solid-Liquid Extraction Unit, “UESLC”. Through this laboratory-scale equipment, the separation of a soluble component from a solid using a solvent in a continuous multistage and countercurrent manner can be studied. It is great news for us to complete this installation at the Public Authority for Applied Education and Training in Kuwait, as it is considered one of the largest institutes in the Middle East in terms of the number of enrolled students and the variety of programs across its different colleges and training institutes.

PDF

Client:
AMERICAN UNIVERSITY OF THE MIDDLE EAST (AUM), EQAILA

Department:
DEPARTMENT OF MECHANICAL ENGINEERING

Description:
We have successfully completed the installation and training of advanced equipment in the area of Fluid Mechanics. This equipment is designed to enhance hands-on learning and provide students with a deeper understanding of fluid dynamics and its applications in mechanical engineering.

PDF

Client:
THE PUBLIC AUTHORITY FOR APPLIED EDUCATION & TRAINING, SAFAT

Description:
We have carried out the installation and training of specialized units in the field of Mechatronics. These cutting-edge trainers are now available to students, offering practical experience and enhancing their knowledge of automated systems and robotics within the engineering curriculum.

PDF

Customer:
BEIRUT ARAB UNIVERSITY (BAU), BEIRUT

Department:

Description:
Installation and Training of units belonging to the area of Energy, Fluid Mechanics and Thermodynamics

PDF

Customer:
POLITEKNIK MUADZAM SHAH , PAHANG

Department:
Laboratory of Fluid Mechanics, Chemical and Mechanical Engineering

Description:
Installation and Training of units belonging to the area of Mechanics, Fluid Mechanics and Thermodynamics

PDF

Customer:
GOVERNMENT TECHNICAL COLLEGE (MANDALAY), MANDALAY

Department:
Department of Mechanical Engineering

Description:
Installation and Training of units belonging to the area of Mechanics and Thermodynamics

PDF

Customer:
MINISTRY OF SCIENCE & TECHNOLOGY

Department:
Department of Promotion and Technical Coordination

Description:
Installation and Training of units belonging to the area of Fluid Mechanics

PDF

Customer:
MINISTRY OF SCIENCE & TECHNOLOGY

Department:
Department of Technical Promotion & Coordination

Description:
Installation and Training of units in THE Ministry of Science

PDF

Customer:
THANLYIN TECHNOLOGICAL UNIVERSITY, YANGON

Department:
Laboratory of Fluid Mechanics

Description:
Installation and Training of units belonging to the area of Fluid Mechanics

Customer:
TECHNOLOGICAL UNIVERSITY (HMAWBI)

Description:
Installation and training of units belonging to the Fluid Mechanics area.

PDF

Customer:
OMAN MILITARY TECHNOLOGICAL COLLEGE, MUSCAT

Department:
Laboratory of Mechanics, Fluid Mechanics and Thermodynamicsa

Description:
Installation and Training of units belonging to the areas of Fluid Mechanics and Thermodynamics, as well as as well as the EDIBON SCADA Net System (ESN)

PDF

Customer:
NED UNIVERSITY OF ENGINEERING & TECHNOLOGY (NEDUET), KARACHI

Department:
Department of Electrical Engineering

Description:
At EDIBON we not only install equipment in the different universities, but we also train students and teachers to use the equipment correctly and make the most of it. We have completed our training in the University of Engineering and Technology of Pakistan, covering the AEL-CPSS-01S, an application of electrical systems of intelligent networks, with automatic control of generation, transmission line and loads with SCADA.

Customer:
KHWAJA FAREED UNIVERSITY OF ENGINEERING AND INFORMATION TECHNOLOGY (KFUEIT)

Description:
Installation and training of units belonging to the Electricity area.

PDF

Customer:
MEHRAN UNIVERSITY OF ENGINEERING & TECHNOLOGY (MUET), JAMSHORO

Department:
Advanced Studies in Water

Description:
Installation and Training of units belonging to the areas of Fluid mechanics (channels)

Customer:
TEXAS A&M UNIVERSITY

Description:
We travelled to Texas A&M University to participate in the Petroleum engineering program (Qatar Tamu) where we installed three units: Computer Controlled Horizontal Three-phase Separator (HTSC), Computer Controlled Vertical Three-phase Separator (VTSC) and the Computer Controlled Fluid Friction in Pipes, with Hydraulics Bench (FME00) (AFTC). We wish that the students can get the most out of them.

PDF

Customer:
COMMUNITY COLLEGE OF QATAR (CCQ), DOHA

Department:
Department of Engineering Technology

Description:
In EDIBON we bet for a practical and quality education. We have been at Community College of Qatar (CCQ), installing the Tachometer and Proximity Test Module, the Computer Controlled Basic Unit and the Computer Controlled Process Control System, with electronic control valve. We are confident that students and professors of the technological engineering department will enjoy and optimize the performance of the new equipment, which will help them to put into practice and consolidate their theoretical knowledge.

PDF

Customer:
TEXAS A&M UNIVERSITY, DOHA

Department:
Department of Petroleum Engineering

Description:
Installation and Training of units belonging to the area of Fluid Mechanics

PDF

Customer:
KSTOVO OIL COLLEGE NAMED BY KORNILOV, KSTOVO

Description:
Installation and Training of units belonging to the area of Chemical Engineeringa

PDF

Customer:
NOVOSIBIRSK STATE UNIVERSITY, NOVOSIBIRSK

Department:
Department of Physics

Description:
Installation and Training of units belonging to the area of Energy and Fluid Mechanics

Client:
AL IMAM MUHAMMAD IBN SAUD ISLAMIC UNIVERSITY, IMAMU

Description:
We have successfully installed the Computer Controlled Process Control system (Electronic Valve), “UCP,” along with the Computer Controlled Air Conditioning Unit with Climatic Chamber “TSAC” and the Laminar Flow Demonstration “FME20.” This equipment, particularly in the field of fluid mechanics, provides extensive hands-on experience and is essential for in-depth study and research.

Client:
ROYAL COMMISSION FOR JUBAIL AND YANBU, RCJY

Description:
We have successfully installed a state-of-the-art laboratory dedicated to Environmental Studies and Process Control. This comprehensive lab is equipped with advanced technologies and systems, providing students and researchers with cutting-edge tools for in-depth analysis and hands-on experience. This installation not only enhances the capacity for high-level research but also positions the institution at the forefront of environmental and process control education.

Client:
JUBAIL TECHNICAL INSTITUTE

Description:
We have traveled to the Jubail Technical School in Saudi Arabia to complete the installation of one of our advanced systems. Students will now have the opportunity to explore the key principles of gravity separation using the Computer Controlled Horizontal Three-phase Separator, "HTSC". We are confident that this equipment will significantly enhance their learning experience.

Client:
PRINCE MOHAMMAD BIN FAHD UNIVERSITY

Description:
We have completed the installation and training of advanced equipment in the fields of Thermodynamics, Thermotechnics and Energy. These installations are designed to provide comprehensive hands-on experience and deepen understanding in these critical areas of study.

Client:
COLLEGE OF FOOD AND ENVIRONMENT TECHNOLOGY IN BURAYDAH

Description:
EDIBON is proud to have successfully completed the installation of 12 advanced units at Buraydah College of Food & Environment Technology in Saudi Arabia. Among the equipment installed are the Computer Controlled Teaching Cream Separator, “DSNC” and the Computer Controlled and Touch Screen UHT Unit, “AUHT/CTS”, along with several others that will significantly enhance the educational and research capabilities of the college. We are thrilled to share the accomplishment of this project and extend our sincere thanks to everyone involved, as well as to the host country for their exceptional hospitality.

PDF

Client:
PRINCE MOHAMMAD BIN FAHD UNIVERSITY (PMU)

Department:
CIVIL ENGINEERING

Description:
This state-of-the-art equipment is specifically designed to bolster the rigorous academic and research programs of the Civil Engineering Department, equipping students and faculty with essential resources to delve into complex civil engineering concepts through practical, hands-on learning and experimentation. This installation marks a substantial enhancement to the university's infrastructure, reinforcing its dedication to excellence in engineering education.

PDF

Client:
MAJMA UNIVERSITY

Description:
We are proud to have completed the installation and training of advanced equipment in the Fluid Mechanics area at Majmaah University. These state-of-the-art systems are specifically designed to enhance the educational and research capabilities of the university's engineering programs. Through hands-on learning and experimentation, students and faculty can now explore and understand the fundamental principles of fluid mechanics, including flow dynamics, pressure analysis, and fluid behavior in various environments. This installation represents a significant step forward in providing Majmaah University with the tools necessary to cultivate future engineers equipped with practical knowledge and skills.

PDF

Client:
UNIVERSITY OF TABUK (UT), TABUK

Department:
DEPARTMENT OF THERMO-FLUIDS ENGINEERING

Description:
We have successfully completed the installation and training of advanced equipment within the Department of Thermo-Fluids Engineering, focusing on the areas of Fluid Mechanics and Thermodynamics. This specialized equipment is designed to deepen the understanding of key concepts in fluid dynamics, heat transfer, and energy systems. By integrating these units into the curriculum, students and faculty can engage in practical, hands-on experiments that bridge the gap between theoretical knowledge and real-world applications. This installation not only enhances the department's educational resources but also strengthens its capacity to conduct cutting-edge research and innovation in the field of thermo-fluids engineering.

PDF

Client:
AL BAHA UNIVERSITY, RIYADH

Department:COLLEGE OF ENGINEERING

Description:
Installation and training of equipment belonging to the area of Electricity.

PDF

Client:
DAMMAM TECHNICAL COLLEGE, DAMMAM

Department:
DEPARTMENT OF CHEMICAL ENGINEERING

Description:

Description:
We have successfully completed the installation and training of advanced equipment in the field of Fluid Mechanics within the Chemical Engineering Department. This specialized equipment is designed to enhance the understanding of fluid behavior and dynamics, which are critical aspects of chemical engineering processes. By providing hands-on learning opportunities, these installations will empower students and faculty to conduct in-depth studies and experiments, bridging the gap between theoretical knowledge and practical application in real-world chemical engineering scenarios.

PDF

Client:
ROYAL COMMISSION FOR JUBAIL AND YANBU, RIYADH

Department:
DEPARTMENT OF CHEMICAL ENGINEERING

Description:
Installation and training of equipment belonging to the area of Chemical Engineering

PDF

Client:
KING SAUD UNIVERSITY (KSU), RIYADH

Department:
SCHOOL OF ENGINEERING

Description:
Installation and Training of units belonging to the area of Mechatronics

PDF

Client:
SHAQRA UNIVERSITY, DAWADMI

Department:
DEPARTMENT OF MECHANICAL ENGINEERING

Description:

PDF

Client:
KING ABDULAZIZ UNIVERSITY (KAU), JEDDAH

Department:
DEPARTMENT OF MECHANICAL ENGINEERING

Description:
Installation and Training of units belonging to the area of Thermodynamics

PDF

Client:
JUBAIL INDUSTRIAL COLLEGE , JUBAIL

Department:
DEPARTMENT OF CHEMICAL ENGINEERING

Description:
Installation and Training of units belonging to the area of Chemical Engineering

PDF

Client:
JAZAN UNIVERSITY, JIZAN

Department:
DEPARTMENT OF CHEMICAL ENGINEERING

Description:
Installation and Training of units belonging to the areas of Thermodynamics and Chemical Engineering

PDF

Client:
NORTHERN BORDER UNIVERSITY (NBU), ARAR

Department:
DEPARTMENT OF MECHANICAL ENGINEERING

Description:
Installation and Training of units belonging to the areas of Energy and Fluid Mechanics

PDF

Customer:
SINGAPORE INSTITUTE OF TECHNOLOGY

Department:
Sustainable Infrastructural Engineering

Description:
Installation and Training of units in Singapore Institute of Technology

Customer:
TÜRKIYE PETROL RAFINERlERI A.Ş

Description:
Our expert engineers have already arrived at Tüpraş to install the pilot plant created for the MOF4AIR project. We are very happy to see how this project continues to move forward.

Client:
BALIKESIR UNIVERSITY

Description:
We have successfully installed a comprehensive laboratory dedicated to the study of electricity. This state-of-the-art equipment is designed to help students and researchers understand the full spectrum of electrical concepts, from the most basic principles to advanced applications. The laboratory includes equipment that allows for hands-on learning and experimentation, covering everything from simple circuits to complex electrical systems. This installation will significantly enhance the educational experience, providing the tools necessary to explore, analyze, and master the intricacies of electricity.

PDF

Client:
ISTANBUL BILGI UNIVERSITY

Department:
DEPARTMENT OF MECHANICAL ENGINEERING

Description:
We have successfully completed the installation and training of advanced equipment in the fields of Mechanics and Thermodynamics. This laboratoy is designed to provide hands-on experience and deepen the understanding of fundamental concepts in both disciplines, empowering students and researchers to explore and master complex systems through practical application and experimentation.

Client:
SHARJAH PORTS AUTHORITY

Departament:
DEPARTAMENT OF SEAPORT AND CUSTOMS

Description:
We have successfully installed our Hydraulic and Electro-Hydraulic Application “AE-HD” along with various kits, including the Hydraulic Power Unit “HPU” and the WBPP-SP system. The Hydraulic Power Unit “HPU” has been meticulously designed by EDIBON to provide all the essential components needed to supply pressurized working oil to EDIBON units with hydraulic circuits. This installation ensures that students and researchers have access to a comprehensive and fully functional hydraulic system for in-depth study and practical applications.

Client:
HIGHER COLLEGES OF TECHNOLOGY RUWAIS, RUWAIS

Department:
Department of Chemical Engineering

Description:
Our EDIBON engineering team has carried out an installation in the Chemical Engineering department at Ruwais Women’s College. From now on, students will be able to continue their education with the Solids Handling Study Unit “QMS” which introduce the students in different aspect of solids behaviour, unit operations as size reduction, mixing, transport, discharge, weighing, etc.

Client:
NEW YORK UNIVERSITY ABU DHABI

Description:
We show you the installation at the New York University Abu Dhabi, very happy with the result! The equipment installed has been the Computer Controlled Test Bench for Single-Cylinder Engines, 7.5 kW, “TBMC8”, the Computer Controlled Stirling Motor, “TMSC”, and the Air -cooled single-cylinder four-stroke petrol engine, “TM8-01”. Hope you enjoy it!

Client:
DUBAI MEN’S CAMPUS

Description:
More than 40 years installing our units in universities and laboratories around the world with the illusion of the first day. On this occasion, we have traveled to Dubai-UAE for the setting-up of the Base Service Unit “TIUSB” and the Cross Flow Heat Exchanger “TICFB” at Higher Colleges of Technology Dubai Men's Campus [DBM] for Engineering Technology & Science to whom we are very grateful. Happy with the result.

PDF

Client:
UNIVERSITY OF SHARJAH, UOS

Department:

Description:
Successful installation and training of advanced equipment in the fields of Energy and Thermodynamics. These units are designed to enhance practical learning and provide in-depth understanding of critical concepts in these disciplines.

PDF

Client:
HIGHER COLLEGES OF TECHNOLOGY - RAS AL KHAIMAH MEN'S COLLEGE, HCT

Department:
DEPARTMENT OF ENGINEERING

Description:
We have successfully completed the installation and training of equipment in the area of Fluid Mechanics. This state-of-the-art equipment is designed to provide students and researchers with practical experience, deepening their understanding of fluid dynamics and related principles.

PDF

Client:
HIGHER COLLEGES OF TECHNOLOGY – RUWAIS COLLEGE

Description:
Successful installation and training of advanced equipment in the field of Chemical Engineering. This unit is designed to provide students and researchers with hands-on experience, enabling them to explore and master key concepts in chemical processes and engineering.

PDF

Client:
NEW YORK UNIVERSITY ABU DHABI (NYU), ABU DHABI

Department:
DEPARTMENT OF MECHANICAL ENGINEERING

Description:
We have successfully completed the installation and training of advanced equipment in the field of Thermodynamics. This equipment is specifically designed to enhance practical learning, providing students and researchers with the solution necessary to deepen their understanding of thermodynamic processes and principles.

PDF

Client:
UNITED ARAB EMIRATES UNIVERSITY, UAEU/p>

Department:
DEPARTMENT OF MECHANICAL ENGINEERING

Description:
We have successfully completed the installation and training of advanced equipment in the field of Thermodynamics. This equipment is designed to provide comprehensive hands-on experience, enhancing the understanding of key thermodynamic principles and their real-world applications. This installation significantly enriches the educational resources available, equipping students and researchers with the tools they need to excel in their studies and research.

PDF

Customer:
KARSHI STATE UNIVERSITY (QARSHIDU), TASHKENT

Department:
Department of Energy Sources & Sustainable Environment

Description:
Proud to contribute to the study of the master programme in Renewable Energy Source and Sustainable Environment at Karshi State University. This time, we have installed the computer Controlled Thermal SolarEnergy Unit that allows to demonstrate solar thermal heating of domestic water in an illustrative manner and the Computer Controlled Photovoltaic Solar Energy Unit. Hope you all enjoy the equipment!