4.4.- INSTALLATIONS AND MAINTENANCE

The needs of today's society are a challenge for any industry, since they have to be in continuous evolution and renewal to adapt to those needs.

View more

In recent years, as a result of the new industrial revolution or "Industry 4.0", the emergence of the "Industrial Internet of Things" ("IIoT") and the "Smart Factories", that adaptation is possible thanks to the application of the most sophisticated techniques in the design of new facilities or in the renovation of existing ones.

In spite of all these technological advances and the exhaustive controls carried out, it should not be forgotten that any element that take part in the productive process is going to be subjected to a mechanical and electrical wear (efforts, loads, etc.) and its useful life is limited. To avoid catastrophic failures, stoppages in production or any type of process that implies an increase of non-productive times and, therefore, an increase of costs, it is extremely important to carry out a good maintenance of machinery, electrical systems, etc.

Traditionally, only two types of maintenance were considered:

  • Corrective: the fault is solved once it has already occurred.
  • Preventive: periodic review of all those problematic elements and their replacement if required.

These types of maintenance involve very high and unnecessary costs in most cases. Nowadays, thanks to the available technology, it is possible to carry out predictive maintenance consisting of a comprehensive analysis of all those variables that take part in all the components of a system and be able to replace them at the right time.

But, if more control over the failures that can suffer all those mechanical components subject to wear is preferred, there is another type of maintenance, known as proactive maintenance. It goes one step further than the predictive maintenance, looking for the root of the problem.

View Products

INSTALLATIONS AND MAINTENANCE EQUIPMENT

1.- PHYSICS 2.- ELECTRONICS 3.- COMMUNICATIONS 4.- ELECTRICITY 5.- ENERGY 6.- MECHATRONICS & AUTOMATION 7.- MECHANICS 8.- FLUID MECHANICS 9.- THERMODYNAMICS & THERMOTECHNICS 10.- PROCESS CONTROL 11.- CHEMICAL ENGINEERING 12.- FOOD & WATER TECHNOLOGIES 13.- ENVIRONMENT 14.- BIOMEDICAL ENGINEERING LABORATORY ACCESSORIES CUSTOMIZED PILOT PLANTS
4.1.- ELECTRICAL INSTALLATIONS 4.2.- HOME AND BUILDING AUTOMATION 4.3.- ELECTRICAL MACHINES 4.4.- INSTALLATIONS AND MAINTENANCE
4.4.1.- CUTAWAY MODELS 4.4.2.- DETACHABLE MODELS 4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING
There are not subgroup available
Showing 31-49 of 49 item(s)
12 24 36
WIRING INSTALLATION TRAINING FOR WIND POWER SYSTEMS - WIT-WPS
  • WIT-WPS
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING

WIT-WPS

Wiring Installation Training for Wind Power Systems

The unit of Wiring Installation Training for Wind Power Systems, "WIT-WPS", has been designed by EDIBON for formation at a professional-practical level in the field of installations, wiring, and commissioning of wind power energy systems.This unit...
View Unit
WIRING INSTALLATION TRAINING FOR INDUSTRIAL LIGHTING INSTALLATIONS - WIT-ILI
  • WIT-ILI
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING

WIT-ILI

Wiring Installation Training for Industrial Lighting Installations

The Wiring Installation Training, Industrial Lighting Installations application, "WIT-ILI", has been designed by EDIBON for the formation at professional-practical level in the field of the installations, wiring and testing of the different...
View Unit
WIRING INSTALLATION TRAINING FOR INDUSTRIAL SIGNALLING ELEMENTS - WIT-ISG
  • WIT-ISG
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING

WIT-ISG

Wiring Installation Training for Industrial Signalling Elements

The Wiring Installation Training, Industrial Signalling Elements application, "WIT-ISG", has been designed by Edibon for the formation at professional-practical level in the field of the installations, wiring and testing of the signaling...
View Unit
WIRING INSTALLATION TRAINING FOR POWER FACTOR CORRECTION DEVICES - WIT-PFC
  • WIT-PFC
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING

WIT-PFC

Wiring Installation Training for Power Factor Correction Devices

The Wiring Installation Training, Power Factor Correction Devices application, "WIT-PFC", has been designed by Edibon for the formation at professional-practical level in the field of the installations, wiring and testing of existing power factor...
View Unit
WIRING INSTALLATION TRAINING FOR INDUSTRIAL SWITCHING ELEMENTS - WIT-ISE
  • WIT-ISE
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING

WIT-ISE

Wiring Installation Training for Industrial Switching Elements

The Wiring Installation Training, Industrial Switching Elements application, "WIT-ISE", has been designed by Edibon for the students formation at a professional-practical level in the field of the installation, wiring and testing of industrial...
View Unit
WIRING INSTALLATION TRAINING FOR ENTRYPHONES - WIT-EPH
  • WIT-EPH
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING

WIT-EPH

Wiring Installation Training for Entryphones

The application of Wiring Installation Training for Entryphones, "WIT-EPH", has been designed by EDIBON for the students formation at a proffessional-practical level in the field of the installation, wiring and testing of entryphones electrical...
View Unit
WIRING INSTALLATION TRAINING FOR CONTROL VIA KNX - WIT-KNX
  • WIT-KNX
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING

WIT-KNX

Wiring Installation Training for Control via KNX

The Wiring Installation Training for Control Via KNX unit, "WIT-KNX", provides students and automation professionals with a unique opportunity to delve into the world of building automation projects, KNX device installation, and ETS software...
View Unit
WIRING INSTALLATION TRAINING FOR START-UP OF DC AND AC MOTOR DRIVES - WIT-SDCAC
  • WIT-SDCAC
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING

WIT-SDCAC

Wiring Installation Training for Start-up of DC and AC Motor Drives

The Wiring Installation Training, Start-up of DC and AC Motor Drives, "WIT-SDCAC", has been designed by Edibon for the formation at professional-practical level in the field of electrical motors controllers. This application provides the future...
View Unit
WIRING INSTALLATION TRAINING FOR PHOTOVOLTAIC SYSTEMS - WIT-PHS
  • WIT-PHS
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING

WIT-PHS

Wiring Installation Training for Photovoltaic Systems

The Wiring Installation Training for Photovoltaic Systems, "WIT-PHS", has been designed by EDIBON for the training at professional practical level in the field of the installations, wiring and commissioning of photovoltaic solar energy...
View Unit
WIRING INSTALLATION TRAINING FOR POWER GENERATION HYBRID SYSTEMS - WIT-PGH
  • WIT-PGH
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING

WIT-PGH

Wiring Installation Training for Power Generation Hybrid Systems

The application of Wiring Installation Training for Power Generation Hybrid Systems, "WIT-PGH", has been designed by EDIBON for the students formation at a practical and professional level in the field of installation, wiring and commissioning of...
View Unit
WIRING INSTALLATION TRAINING FOR NETWORK SYSTEMS - WIT-NETS
  • WIT-NETS
Available
4.4.3.- INSTALLATIONS AND MAINTENANCE TRAINING

WIT-NETS

Wiring Installation Training for Network Systems

The Wiring Installation Training for Network Systems application, "WIT-NETS", has been designed by EDIBON for the formation at professional-practical level in the field of the installations, wiring and testing of the technology employed in the...
View Unit
Ask for information