2.- ELECTRONICS

Electronics is the branch of physics focused on the behavior of electrons. In engineering, electronics is the part that studies and develops electronic circuits so that the electrons circulating through them have the behavior required by the specifications of the application.

Electronics has been one of the most developed disciplines throughout the 20th century, going from having a very limited application as power supplies to having a great impact on society. Some examples of key electronic applications to understand this great influence are the sensors and meters of all kinds of physical quantities such as pressure level, flow level and temperature measurement, the use of electronic amplifiers and filters, the development of integrated circuits, microprocessors and personal computers, the development of transistors of different technologies such as MOSFET, JFET, BJT, IGBT, etc.

Electronics applications are almost endless, and new contributions are improved and added each year. Depending on the application of the electronic circuits the following groups are differentiated: analog electronics and digital electronics depending on whether binary or analog signals are used, power electronics depending on whether high electric currents and electric voltages are used, electronic instrumentation depending on whether they are used to make electronic measurements of physical quantities, etc.

The future of electronics focuses on the miniaturization of electronic components, increasing their efficiency and speed. In this work, the discovery of revolutionary new materials, such as graphene or silicene, is of key importance.

View Products

Related Materials

ELECTRONICS SUBCATEGORIES

2.1.- POWER SUPPLIES, MEASUREMENT EQUIPMENT AND ACCESSORIES

The electronic laboratory equipment is the set of instruments required to carry out the experimentation in a practical session of electronics. The characteristics of the equipment will depend on the theoretical level of the laboratory to be equipped, whether it is a technical high school, a...

View

2.2.- KITS FOR CIRCUITS ASSEMBLY

The electronic development phase of a device is a group of stages carried out to obtain a product that meets the required specifications.The most characteristic stages of any electronic device development are: defining the equipment specifications, designing the different electronic circuits that...

View

2.3.- THEORETICAL - PRACTICAL FUNDAMENTALS

The electronics fundamentals are the set of knowledge aimed at providing the student with a solid base to analyze and understand the general operation of the most common electronic circuits, and the individual function of the electronic components that compose them.Acquiring a good theoretical...

View

2.4.- INDUSTRIAL ELECTRONICS

Industrial electronics is a branch of electronic engineering that focuses on industrial-grade electronic systems. One of the most important branches of industrial electronics is power electronics, which is responsible for the development of electronic applications that control and regulate high...

View

2.5.- AUTOMOTIVE ELECTRONICS

Automotive electronics is the branch of electronic engineering focused exclusively on the development of electrical and electronic systems specially designed to be installed in the car. All the systems developed in automotive electronics are adapted to withstand the harsh operation conditions in...

View

2.1.- POWER SUPPLIES, MEASUREMENT EQUIPMENT AND ACCESSORIES 2.2.- KITS FOR CIRCUITS ASSEMBLY 2.3.- THEORETICAL - PRACTICAL FUNDAMENTALS 2.4.- INDUSTRIAL ELECTRONICS 2.5.- AUTOMOTIVE ELECTRONICS

ELECTRONICS EQUIPMENT

Showing 1-30 of 122 item(s)

BASIC ELECTRONICS AND ELECTRICITY LABORATORY - LIEBA

LIEBA

Available

14.2.1.6.- POWER ELECTRONICS

LIEBA

Basic Electronics and Electricity Laboratory

We present a flexible and modular-based system for learning basic electronics, basic electricity and circuit theory. The advantage given by this learning and teaching system is that the student establishes his own rhythm, thus rendering...

Accessory of LICOMBA

Available

2.1.- POWER SUPPLIES, MEASUREMENT EQUIPMENT AND ACCESSORIES

FACO

Power Supply

Accessory of LICOMBA

Using this power supply, training and practices can be done conventionally. This is the most common power supply used with our modules.

BASE UNIT, WITH BUILT-IN POWER SUPPLY - EBC100

Accessory of LICOMBA

Available

2.1.- POWER SUPPLIES, MEASUREMENT EQUIPMENT AND ACCESSORIES

EBC100

Base Unit, with built-in power supply

Accessory of LICOMBA

This unit is self-complete, it includes hardware, power supply and the necessary connections for supplying power and allocating the available modules.

DIRECT CURRENT (DC) CIRCUITS MODULE - N-M1

N-M1

Available

14.2.1.1.- BASIC ELECTRICAL LAWS CONCEPTS

N-M1

Direct Current (DC) Circuits Module

For the correct understanding of electronics it is necessary to know some fundamental laws and theorems such as Ohm’s Law, Kirchhoff’s Laws and other simple theorems of initiation to D.C. circuits.With Direct Current (D.C.) Circuits Module,...

ALTERNATING CURRENT (AC) CIRCUITS MODULE - N-M2

N-M2

Available

14.2.1.1.- BASIC ELECTRICAL LAWS CONCEPTS

N-M2

Alternating Current (AC) Circuits Module

In contrast to DC, which always has the same direction and sense, in AC the flow of electrons changes direction periodically with a frequency of 50 or 60 Hz (depending on the country).With Alternating Current (AC) Circuits Module, "N-M2", designed...

N-M16

Available

14.2.1.1.- BASIC ELECTRICAL LAWS CONCEPTS

N-M16

Electric Networks Module

After studying the basic knowledge of electrical networks, we must understand and investigate the dependence between current and voltage applied to different electrical devices.With the Electric Networks Module, "N-M16", designed by EDIBON, it is...

N-M17

Available

14.2.1.1.- BASIC ELECTRICAL LAWS CONCEPTS

N-M17

Electromagnetism Module

Electromagnetism is the interaction between electric charges. It is described in terms of charges interacting between of electric and magnetic fields.With the Electromagnetism Module, "N-M17", designed by EDIBON, the operation of electromagnetic...

N-M18

Available

14.2.1.1.- BASIC ELECTRICAL LAWS CONCEPTS

N-M18

Three-phase Circuits Module

Three-phase voltage is essentially a system of three alternating voltages, coupled (all 3 are produced simultaneously in a generator) and 120º out of phase with each other (i.e. one third of the period).The Three-phase Circuits Module, "N-M18",...

N-M6

Available

14.2.1.2.- ANALOG ELECTRONICS

N-M6

Oscillators Module

Oscillators operation is usually very similar in all of them: the oscillating circuit produces an oscillation, then the amplifier increases it and finally the feedback network takes a part of the energy from the oscillating circuit and introduces...

N-M7

Available

14.2.1.2.- ANALOG ELECTRONICS

N-M7

Operational Amplifiers Module

Operational amplifiers are compact, active, linear and high-gain devices designed to provide the desired transfer function. An operational amplifier consists of an electronic circuit having two inputs and one output. The output is the difference...

ANALOG/DIGITAL CONVERTERS MODULE - N-M60

N-M60

Available

2.3.3.- DIGITAL ELECTRONICS

N-M60

Analog/Digital Converters Module

Most of the "information" generated in the world by various physical phenomena has a strong analogical character. This means that the information undergoes a continuous variation within certain limits determined over time. Of course, there is also...

N-M8

Available

14.2.1.2.- ANALOG ELECTRONICS

N-M8

Filters Module

An electronic filter is an element that allows electrical signals to pass through it, at a specific frequency or frequency ranges while preventing the passage of others, being able to modify both, their amplitude and phase. It is a device that...

DIGITAL/ANALOG CONVERTERS MODULE - N-M61

N-M61

Available

2.3.3.- DIGITAL ELECTRONICS

N-M61

Digital/Analog Converters Module

Digital/analog conversion happens when you want to recover or re-obtain a digital signal that has been processed and we want to regenerate it. A signal that has been sampled, for example, a temperature signal and we need to return it to the...

DIGITAL SYSTEMS & CONVERTERS MODULE - N-M10

N-M10

Available

14.2.1.3.- DIGITAL ELECTRONICS

N-M10

Digital Systems & Converters Module

Generally, an analog to digital converter is an electronic device that converts an analog voltage input to a digital number.digital number. The digital output can use different coding schemes, such as binary, although some non-electrical or...

DIGITAL ELECTRONICS FUNDAMENTALS MODULE - N-M11

N-M11

Available

14.2.1.3.- DIGITAL ELECTRONICS

N-M11

Digital Electronics Fundamentals Module

Digital systems are systems for processing, treatment or transmission of information, in which such information is limited to take values in a discrete set. These signals (whose magnitude can only take one value from a discrete set of values) are...

BASIC COMBINATIONAL CIRCUITS MODULE - N-M12

N-M12

Available

14.2.1.3.- DIGITAL ELECTRONICS

N-M12

Basic Combinational Circuits Module

A combinational circuit is an electronic circuit in which the value of its outputs at a given instant, depends on the value of the inputs at the same instant. In other words, it is a circuit that has no memory. Combinational circuits work with...

BASIC SEQUENTIAL CIRCUITS MODULE - N-M13

N-M13

Available

14.2.1.3.- DIGITAL ELECTRONICS

N-M13

Basic Sequential Circuits Module

Logic gates and the circuits created with them constitute combinational logic, so called because the output only depends on the combination of the input variables present.There is a second group of logic circuits called sequential logic, so called...

N-M3

Available

14.2.1.4.- SEMICONDUCTORS

N-M3

Semiconductors I Module

Semiconductors are materials characterized by a resistivity lower than an insulator and higher than a conductor. There are different types of semiconductors, among which we could highlight diodes as extrinsic semiconductors (formed by more than...

N-M4

Available

14.2.1.4.- SEMICONDUCTORS

N-M4

Semiconductors II Module

To improve and extend the characteristics of the input signals, it is possible to use two or more transistors. Thus, you may want to build an amplifier in which you want to increase the input impedance without decreasing the gain. The solution to...

N-M14

Available

14.2.1.4.- SEMICONDUCTORS

N-M14

Optoelectronics Module

Optoelectronics is the link between optical systems and electronic systems. Optoelectronic components are those whose operation is directly related to light.They are semiconductor devices capable of producing light radiation within the human...

EDIBON DATA ACQUISITION SYSTEM AND VIRTUAL INSTRUMENTATION - EDAS/VIS

EDAS/VIS

Available

2.1.- POWER SUPPLIES, MEASUREMENT EQUIPMENT AND ACCESSORIES

EDAS/VIS

EDIBON Data Acquisition System and Virtual Instrumentation

The EDIBON Data Acquisition System and Virtual Instrumentation, "EDAS/VIS", designed by EDIBON, is an acquisition and control system suitable for EDIBON electronics and communications units that do not have supervision, control and data...

EDIBON DATA ACQUISITION SYSTEM / VIRTUAL INSTRUMENTATION SYSTEM WITH WI-FI COMMUNICATION - EDAS/VIS-WF

EDAS/VIS-WF

Available

2.1.- POWER SUPPLIES, MEASUREMENT EQUIPMENT AND ACCESSORIES

EDAS/VIS-WF

EDIBON Data Acquisition System / Virtual Instrumentation System with WI-FI communication

The EDAS/VIS-WF system performs all the functions required to visualize the signals connected to the unit: acquisition, conditioning, processing and visualization in the virtual instruments.The EDAS/VIS-WF trainer offers the possibility of a...

ELECTRONICS FOR MOTORS AND GENERATORS UNIT - M99-6

M99-6

Available

2.3.1.- BASIC ELECTRICAL LAWS CONCEPTS

M99-6

Electronics for Motors and Generators Unit

The Electronics for Motors and Generators Unit, "M99-6", designed by EDIBON, enables to carry out different practices related with motors and generators. The unit has different different types of motors: DC motor, AC motor and stepper motor.The...

FOR FURTHER INFORMATION, CONTACT US