2.- ELECTRONICS

Electronics is the branch of physics focused on the behavior of electrons. In engineering, electronics is the part that studies and develops electronic circuits so that the electrons circulating through them have the behavior required by the specifications of the application.

Electronics has been one of the most developed disciplines throughout the 20th century, going from having a very limited application as power supplies to having a great impact on society. Some examples of key electronic applications to understand this great influence are the sensors and meters of all kinds of physical quantities such as pressure level, flow level and temperature measurement, the use of electronic amplifiers and filters, the development of integrated circuits, microprocessors and personal computers, the development of transistors of different technologies such as MOSFET, JFET, BJT, IGBT, etc.

Electronics applications are almost endless, and new contributions are improved and added each year. Depending on the application of the electronic circuits the following groups are differentiated: analog electronics and digital electronics depending on whether binary or analog signals are used, power electronics depending on whether high electric currents and electric voltages are used, electronic instrumentation depending on whether they are used to make electronic measurements of physical quantities, etc.

The future of electronics focuses on the miniaturization of electronic components, increasing their efficiency and speed. In this work, the discovery of revolutionary new materials, such as graphene or silicene, is of key importance.

View Products

Related Materials

ELECTRONICS SUBCATEGORIES

2.1.- POWER SUPPLIES, MEASUREMENT EQUIPMENT AND ACCESSORIES

The electronic laboratory equipment is the set of instruments required to carry out the experimentation in a practical session of electronics. The characteristics of the equipment will depend on the theoretical level of the laboratory to be equipped, whether it is a technical high school, a...

View

2.2.- KITS FOR CIRCUITS ASSEMBLY

The electronic development phase of a device is a group of stages carried out to obtain a product that meets the required specifications.The most characteristic stages of any electronic device development are: defining the equipment specifications, designing the different electronic circuits that...

View

2.3.- THEORETICAL - PRACTICAL FUNDAMENTALS

The electronics fundamentals are the set of knowledge aimed at providing the student with a solid base to analyze and understand the general operation of the most common electronic circuits, and the individual function of the electronic components that compose them.Acquiring a good theoretical...

View

2.4.- INDUSTRIAL ELECTRONICS

Industrial electronics is a branch of electronic engineering that focuses on industrial-grade electronic systems. One of the most important branches of industrial electronics is power electronics, which is responsible for the development of electronic applications that control and regulate high...

View

2.5.- AUTOMOTIVE ELECTRONICS

Automotive electronics is the branch of electronic engineering focused exclusively on the development of electrical and electronic systems specially designed to be installed in the car. All the systems developed in automotive electronics are adapted to withstand the harsh operation conditions in...

View

2.1.- POWER SUPPLIES, MEASUREMENT EQUIPMENT AND ACCESSORIES 2.2.- KITS FOR CIRCUITS ASSEMBLY 2.3.- THEORETICAL - PRACTICAL FUNDAMENTALS 2.4.- INDUSTRIAL ELECTRONICS 2.5.- AUTOMOTIVE ELECTRONICS

ELECTRONICS EQUIPMENT

Showing 31-60 of 122 item(s)

Available

2.3.2.- ANALOG ELECTRONICS

M99

Analog Circuits Unit

The Analog Circuits Unit, "M99", designed by EDIBON, allows to do different practices related to basic electronics. The unit has different parts: analog multiplexer, analog multiplier, function generator, AM modulator and AM demodulator.The "M99"...

Available

2.3.5.- INSTRUMENTATION & CONTROL

M41

Resistance Transducers

This unit allows different practices related to resistance transducers to be carried out. The unit has five different types of transducers: PTC, NTC, LDR, strain gauge and RTD.The operation of thermistors is based on the principle that the...

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M44

Applications of Light

This unit allows different practices related to the measurement of light intensity to be carried out. Photodiodes are semiconductor light sensors that generate a current or voltage when the P-N junction in the semiconductor is illuminated with...

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M45

Linear Position and Force

Linear Variable Displacement Transducers (LVDT) provide a certain amount of voltage output relative to the parameters being measured, for example force, for signal conditioning.With Linear Position and Force Unit, "M45", designed by EDIBON, it is...

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M46

Environmental Measurements

Environmental measurement is a data collection process. In other words, it is a continuous and systematic follow-up study of environmental variables (air quality and speed, humidity, pressure, etc.). The aim is to identify and evaluate...

ROTATIONAL SPEED & POSITION CONTROL - M47

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M47

Rotational Speed & Position Control

The unit is equipped with a DC motor whose rotation speed can be controlled by the supply voltage. The following sensors are arranged along the motor shaft: optical slot sensor, inductive sensor, infrared reflection sensor, Hall effect sensor,...

Available

14.2.1.5.- INSTRUMENTATION AND CONTROL

M48

Sound Measurements

With the Sound Measurement Unit, "M48", designed by EDIBON, different practices related to sound measurements can be carried out. The unit has three different types of components: two types of microphones and a loudspeaker.

APPLICATIONS OF TEMPERATURE AND PRESSURE MODULE - N-M49

N-M49

Available

2.3.5.- INSTRUMENTATION & CONTROL

N-M49

Applications of Temperature and Pressure Module

A transducer is a device that is capable of transforming or converting a certain type of input energy into a different one at the output. Depending on the application they have, the name itself will indicate the type of conversion it performs, for...

N-M9

Available

14.2.1.6.- POWER ELECTRONICS

N-M9

Power Electronics Module

Semiconductors used in power electronics operate as switches and therefore it is interesting to know the conduction characteristics, switching and control methods.With Power Electronics Module, "N-M9", designed by EDIBON, the operation of MOSFET...

N-M5

Available

14.2.1.6.- POWER ELECTRONICS

N-M5

Power Supplies Module

With the Power Supplies Module "N-M5", designed by EDIBON, symmetrical voltage regulators, operation of fixed, symmetrical and switched-mode power supplies as well as rectification (conversion of an AC voltage to a DC voltage) can be studied.In...

BASIC ELECTRONICS AND ELECTRICITY ASSEMBLY KITS: - M-KITS

M-KITS

Available

2.2.- KITS FOR CIRCUITS ASSEMBLY

M-KITS

Basic Electronics and Electricity Assembly Kits:

The purpose of Electronics and Electricity Assembly Kits (M-KITS) is to provide the students with the necessary elements for creating their own circuits.

Accessory of M-KITS

Available

2.2.- KITS FOR CIRCUITS ASSEMBLY

N-M15

Own Development Module

Accessory of M-KITS

The Own Development Module "N-M15", designed by EDIBON, consists of a circuit board that will allow the realization of a set of assemblies on the mentioned board, allowing the study of the basic concepts of direct current circuits.The circuits can...

DIRECT CURRENT (DC) CIRCUITS KIT - M1/KIT

Accessory of M-KITS

Available

2.2.- KITS FOR CIRCUITS ASSEMBLY

M1/KIT

Direct Current (DC) Circuits Kit

Accessory of M-KITS

With the Direct Current (DC) Circuits Kit, "M1/KIT", designed by EDIBON, you can begin to study the basic principles of direct current.

ALTERNATING CURRENT (AC) CIRCUITS KIT - M2/KIT

Accessory of M-KITS

Available

2.2.- KITS FOR CIRCUITS ASSEMBLY

M2/KIT

Alternating Current (AC) Circuits Kit

Accessory of M-KITS

With Alternating Current (AC) Circuits Kit, "M2/KIT", designed by EDIBON, you can start to study the basic principles in alternating current.

Accessory of M-KITS

Available

2.2.- KITS FOR CIRCUITS ASSEMBLY

M3/KIT

Semiconductors I Kit

Accessory of M-KITS

With Semiconductors I Kit, "M3/KIT", designed by EDIBON, the basic concepts of diodes can be studied, at the same time as the student will be asked to carry out a series of assemblies on the practice board to consolidate his knowledge of PN-type...

Accessory of M-KITS

Available

2.2.- KITS FOR CIRCUITS ASSEMBLY

M4/KIT

Semiconductors II Kit

Accessory of M-KITS

With Semiconductors II Kit, "M4/KIT", designed by EDIBON, semiconductors can be studied by extending the knowledge acquired in the basic module "M3/KIT".

Accessory of M-KITS

Available

2.2.- KITS FOR CIRCUITS ASSEMBLY

M5/KIT

Power Supplies Kit

Accessory of M-KITS

With the Power Supplies Kit "M5/KIT", designed by EDIBON, symmetrical voltage regulators, operation of fixed, symmetrical and switched-mode power supplies as well as rectification (conversion of an AC voltage to a DC voltage) can be studied.

Accessory of M-KITS

Available

2.2.- KITS FOR CIRCUITS ASSEMBLY

M6/KIT

Oscillators Kit

Accessory of M-KITS

With the Oscillators Kit, "M6/KIT", designed by EDIBON, the different oscillators can be studied: RC and LC network oscillators, Wein bridge, Colpitts, Hartley and the astable multivibrator.

Accessory of M-KITS

Available

2.2.- KITS FOR CIRCUITS ASSEMBLY

M7/KIT

Operational Amplifiers Kit

Accessory of M-KITS

With Operational Amplifiers Kit, "M7/KIT", designed by EDIBON, the different amplifiers can be studied: inverting, non-inverting, additive, differential and comparators.

Accessory of M-KITS

Available

2.2.- KITS FOR CIRCUITS ASSEMBLY

M8/KIT

Filters Kit

Accessory of M-KITS

With Filters Kit, "M8/KIT", designed by EDIBON, the different types of filters can be studied: RC and LC, in "T" type configuration, active filters and also study associations of one and others in order to be able to practice with more complex...

Accessory of M-KITS

Available

2.2.- KITS FOR CIRCUITS ASSEMBLY

M9/KIT

Power Electronics Kit

Accessory of M-KITS

With Power Electronics Kit, "M9/KIT", designed by EDIBON, the operation of MOSFET transistors, thyristors, TRIACs, etc. can be studied.

DIGITAL SYSTEMS AND CONVERTERS KIT - M10/KIT

Accessory of M-KITS

Available

2.2.- KITS FOR CIRCUITS ASSEMBLY

M10/KIT

Digital Systems and Converters Kit

Accessory of M-KITS

With Digital Systems and Converters Kit, "M10/KIT", designed by EDIBON, the behaviour of BCD/Binary counters, comparators and analogue integrators can be studied, as well as analogue/digital conversion and viceversa.

DIGITAL ELECTRONIC FUNDAMENTALS KIT - M11/KIT

Accessory of M-KITS

Available

2.2.- KITS FOR CIRCUITS ASSEMBLY

M11/KIT

Digital Electronic Fundamentals Kit

Accessory of M-KITS

With Digital Electronic Fundamentals Kit, "M11/KIT", designed by EDIBON, numbering systems, logic circuits, TTL gates, CMOS, Boolean algebra, etc. can be studied.

BASIC COMBINATIONAL CIRCUITS KIT - M12/KIT

Accessory of M-KITS

Available

2.2.- KITS FOR CIRCUITS ASSEMBLY

M12/KIT

Basic Combinational Circuits Kit

Accessory of M-KITS

With Basic Combinational Circuits Kit, "M12/KIT", designed by EDIBON, encoders, decoders, multiplexers, demultiplexers, digital comparators and arithmetic and logical operations can be studied.

Accessory of M-KITS

Available

2.2.- KITS FOR CIRCUITS ASSEMBLY

M13/KIT

Basic Sequential Circuits Kit

Accessory of M-KITS

With Basic Sequential Circuits Kit, "M13/KIT", designed by EDIBON, all types of bistables, counters, flip-flops, synchronous sequential circuits and the operation of memories can be studied.

FOR FURTHER INFORMATION, CONTACT US