8.9.- INSTALLATIONS AND MAINTENANCE

The needs of today's society are a challenge for any industry, since they have to be in continuous evolution and renewal to adapt to those needs.

View more

In recent years, as a result of the new industrial revolution or "Industry 4.0", the emergence of the "Industrial Internet of Things" ("IIoT") and the "Smart Factories", that adaptation is possible thanks to the application of the most sophisticated techniques in the design of new facilities or in the renovation of existing ones.

In spite of all these technological advances and the exhaustive controls carried out, it should not be forgotten that any element that take part in the productive process is going to be subjected to a mechanical and electrical wear (efforts, loads, etc.) and its useful life is limited. To avoid catastrophic failures, stoppages in production or any type of process that implies an increase of non-productive times and, therefore, an increase of costs, it is extremely important to carry out a good maintenance of machinery, electrical systems, etc.

Traditionally, only two types of maintenance were considered:

  • Corrective: the fault is solved once it has already occurred.
  • Preventive: periodic review of all those problematic elements and their replacement if required.

These types of maintenance involve very high and unnecessary costs in most cases. Nowadays, thanks to the available technology, it is possible to carry out predictive maintenance consisting of a comprehensive analysis of all those variables that take part in all the components of a system and be able to replace them at the right time.

But, if more control over the failures that can suffer all those mechanical components subject to wear is preferred, there is another type of maintenance, known as proactive maintenance. It goes one step further than the predictive maintenance, looking for the root of the problem.

View Products

INSTALLATIONS AND MAINTENANCE EQUIPMENT

1.- PHYSICS 2.- ELECTRONICS 3.- COMMUNICATIONS 4.- ELECTRICITY 5.- ENERGY 6.- MECHATRONICS & AUTOMATION 7.- MECHANICS 8.- FLUID MECHANICS 9.- THERMODYNAMICS & THERMOTECHNICS 10.- PROCESS CONTROL 11.- CHEMICAL ENGINEERING 12.- FOOD & WATER TECHNOLOGIES 13.- ENVIRONMENT 14.- BIOMEDICAL ENGINEERING LABORATORY ACCESSORIES CUSTOMIZED PILOT PLANTS
8.1.- FLUID MECHANICS MODULAR LABORATORY 8.2.- MEASUREMENT 8.3.- HYDROSTATICS 8.4.- FLOW VISUALIZATION 8.5.- HYDRAULIC CHANNELS 8.6.- AERODYNAMICS 8.7.- FLUID MACHINES 8.8.- FLUID PIPING SYSTEM 8.9.- INSTALLATIONS AND MAINTENANCE
8.9.1.- CUTAWAY MODELS 8.9.2.- DETACHABLE MODELS 8.9.3.- INSTALLATIONS AND MAINTENANCE
Showing 1-12 of 32 item(s)
12 24 36
UNIT TO STUDY AN ANGULAR NEEDLE VALVE CUTAWAY MODEL - ANVCM
  • ANVCM
Available
8.9.1.- CUTAWAY MODELS

ANVCM

Unit to Study an Angular Needle Valve Cutaway Model

The Unit to Study an Angular Needle Valve Cutaway Model, "ANVCM", allows the students to visualize the inner parts of a valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile features...
View Unit
UNIT TO STUDY A BALL VALVE CUTAWAY MODEL - BVCM
  • BVCM
Available
8.9.1.- CUTAWAY MODELS

BVCM

Unit to Study a Ball Valve Cutaway Model

The Unit to Study a Ball Valve Cutaway Model, "BVCM", allows the students to visualize the inner parts of a ball valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile features that...
View Unit
UNIT TO STUDY A LIFT NON-RETURN VALVE CUTAWAY MODEL - LNVCM
  • LNVCM
Available
8.9.1.- CUTAWAY MODELS

LNVCM

Unit to Study a Lift Non-return Valve Cutaway Model

The Unit to Study a Lift Non-Return Valve Cutaway Model, "LNVCM", allows the students to visualize the inner parts of a needle valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile...
View Unit
UNIT TO STUDY A NON-RETURN BUTTERFLY VALVE CUTAWAY MODEL - NBVCM
  • NBVCM
Available
8.9.1.- CUTAWAY MODELS

NBVCM

Unit to Study a Non-return Butterfly Valve Cutaway Model

The Unit to Study a Non-Return Butterfly Valve Cutaway Model, "NBVCM", allows the students to visualize the inner parts of a butterfly valve, to evaluate the relation with each other accurately and to understand their function.It is a valve to...
View Unit
UNIT TO STUDY A PIPE MESH FILTER CUTAWAY MODEL - PMFCM
  • PMFCM
Available
8.9.1.- CUTAWAY MODELS

PMFCM

Unit to Study a Pipe Mesh Filter Cutaway Model

The Unit to Study a Pipe Mesh Filter Cutaway Model, "PMFCM", allows the students to visualize the inner parts of a mesh filter, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a mesh filter...
View Unit
UNIT TO STUDY A STRAIGHT-WAY NEEDLE VALVE CUTAWAY MODEL - SNVCM
  • SNVCM
Available
8.9.1.- CUTAWAY MODELS

SNVCM

Unit to Study a Straight-way Needle Valve Cutaway Model

The Unit to Study a Straight-Way Needle Valve Cutaway Model, "SNVCM", allows the students to visualize the inner parts of a needle valve, to evaluate the relation with each other accurately and to understand their function.It is a device with...
View Unit
UNIT TO STUDY A WATER METER CUTAWAY MODEL - WMCM
  • WMCM
Available
8.9.1.- CUTAWAY MODELS

WMCM

Unit to Study a Water Meter Cutaway Model

The Unit to Study a Water Meter Cutaway Model, "WMCM", allows the students to visualize the inner parts of a water meter, to evaluate the relation with each other accurately and to understand their function.It is a model of a device that measures,...
View Unit
UNIT TO STUDY AN UNDERGROUND HYDRANT CUTAWAY MODEL - UHCM
  • UHCM
Available
8.9.1.- CUTAWAY MODELS

UHCM

Unit to Study an Underground Hydrant Cutaway Model

The Unit to Study an Underground Hydrant Cutaway Model, "UHCM", allows the students to visualize the inner parts of a hydrant, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a hydrant is...
View Unit
CENTRIFUGAL PUMP CUTAWAY MODEL UNIT - CPCM
  • CPCM
Available
8.9.1.- CUTAWAY MODELS

CPCM

Centrifugal Pump Cutaway Model Unit

The Centrifugal Pump Cutaway Model Unit, "CPCM", allows the students to visualize the inner parts of a centrifugal pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of centrifugal pump is...
View Unit
GEAR PUMP CUTAWAY MODEL UNIT - GPCM
  • GPCM
Available
8.9.1.- CUTAWAY MODELS

GPCM

Gear Pump Cutaway Model Unit

The Gear Pump Cutaway Model Unit, "GPCM", allows the students to visualize the inner parts of a gear pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of gear pump is composed of real...
View Unit
PISTON PUMP CUTAWAY MODEL UNIT - PPCM
  • PPCM
Available
8.9.1.- CUTAWAY MODELS

PPCM

Piston Pump Cutaway Model Unit

The Piston Pump Cutaway Model Unit, "PPCM", allows the students to visualize the inner parts of a piston pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of piston pump is composed of...
View Unit
ASSEMBLY OF A SHUT-OFF VALVE UNIT - ASV
  • ASV
Available
8.9.2.- DETACHABLE MODELS

ASV

Assembly of a Shut-Off Valve Unit

The Assembly of a Shut-Off Valve Unit, "ASV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts list and the...
View Unit
Ask for information