8.- FLUID MECHANICS

The branch of Fluid Mechanics studies the laws of the behavior of fluids at rest (fluid statics) or in motion (fluid dynamics) and their interaction processes with solid bodies. A fluid is considered to be a substance that can flow, in other words, move. Among them there are liquids (water, oil, alcohol, milk, sulfuric acid, gasoline) and gases (air, oxygen, nitrogen, helium, argon, methane, butane, natural gas).

The fluids can be found everywhere in the everyday life, from the air that surrounds us, the water in the pools and for irrigation, the hydraulic system that allows us to brake in our car, heating or air conditioning, to our own blood system. Fluid studies are based on the well-known Archimedes and Pascal’s principles, Bernoulli’s equation, Venturi effect or Darcy's law, among others. The field of Fluid Mechanics Engineering that seeks applicability is studied empirically and mathematically, highlighting dimensionless numbers such as Reynolds, Prandtl, Mach and Froude. The importance of the fluid mechanics principles have left common inventions, such as water transfers by channels, maritime and air transport, hydraulic, thermal and pneumatic machines, solutions to the problems of cavitation or water hammer in pipes, hydraulic and pneumatic transmissions and controls, etc.

Given the relevance of fluids in diverse applications, it is important to know their nature, that is to say, the type of fluid and describe it based on its properties. The most significant ones are: pressure, temperature, volume, density, viscosity, compressibility, specific heat, thermal expansion and miscibility.

View Products

Related Materials

FLUID MECHANICS SUBCATEGORIES

8.1.- FLUID MECHANICS MODULAR LABORATORY

Hydraulics is the branch of science that deals with the mechanical properties of fluids, and Fluid Mechanics is the foundation of Hydraulics. EDIBON aims to provide a simple and practical response to the academic demand for teaching and learning the basics of Fluid Mechanics. For this, it offers...

View

8.2.- MEASUREMENT

Metrology is the science that studies the measurement of magnitudes. It is based on the process that seeks to establish a relationship between a reference value and the object or phenomenon whose magnitude must be quantified and obtain an expression of the measurement.The measurements must be...

View

8.3.- HYDROSTATICS

Hydrostatics is the branch of fluid mechanics that studies the associated phenomena and behavior that occur when a fluid is in a container and there are no forces that modify the state of the liquid at rest or in motion. By contrast, hydrodynamics studies fluids in motion.Hydrostatics is based on...

View

8.4.- FLOW VISUALIZATION

The flow of fluids belongs to the branch of fluid dynamics. The studies focus on understanding the motion of fluids, determined by Newton's laws, the laws of conservation of mass and energy and other laws, such as the Stokes, the Reynolds number or Prandt, among others.The fluid motion and...

View

8.5.- HYDRAULIC CHANNELS

Water is the fundamental element used by living beings and, since ancient times, different devices have been developed for its distribution and consumption, such as channels.The hydraulic or open channel or, simply, channel is defined as a piping system open to the atmosphere and used to...

View

8.6.- AERODYNAMICS

Aerodynamics is the part of fluid mechanics that studies the gases in motion and the forces or reactions to which the bodies that interact with those gases are subjected. Apart from the importance of aerodynamics in itself, the value of its contribution to aeronautics must be added. According to...

View

8.7.- FLUID MACHINES

A special app,lication area in fluid mechanics is the one responsible for the study of fluid machines. Fluid machines are devices that convert the energy of the fluid that passes through them or transfer energy to the fluid. That fluid can be gas, steam or liquid.Based on this definition, fluid...

View

8.8.- FLUID PIPING SYSTEM

In engineering, a fluid piping system is defined as the structure or construction that transports a fluid from a source to the required destination. Two types of conduits are distinguished: closed conduits (pipes, tunnels or culverts) and open conduits (natural currents). Flow in closed conduits...

View

8.9.- INSTALLATIONS AND MAINTENANCE

The needs of today's society are a challenge for any industry, since they have to be in continuous evolution and renewal to adapt to those needs.In recent years, as a result of the new industrial revolution or "Industry 4.0", the emergence of the "Industrial Internet of Things" ("IIoT") and the...

View

8.1.- FLUID MECHANICS MODULAR LABORATORY 8.2.- MEASUREMENT 8.3.- HYDROSTATICS 8.4.- FLOW VISUALIZATION 8.5.- HYDRAULIC CHANNELS 8.6.- AERODYNAMICS 8.7.- FLUID MACHINES 8.8.- FLUID PIPING SYSTEM 8.9.- INSTALLATIONS AND MAINTENANCE

FLUID MECHANICS EQUIPMENT

Showing 1-24 of 166 item(s)

BASIC FLUIDS MECHANICS INTEGRATED LABORATORY - LIFLUBA

LIFLUBA

Available

8.1.7.- HYDRAULIC MACHINES: TURBINES

LIFLUBA

Basic Fluids Mechanics Integrated Laboratory

Hydraulics is the branch of science that deals with the mechanical properties of fluids, and Fluid Mechanics provides the foundation for hydraulics.With LIFLUBA (Basic Fluids Mechanics Integrated Laboratory), EDIBON tries to give answer to the...

FME00

Available

8.1.1.- BASE UNITS

FME00

Hydraulics Bench

The Hydraulics Bench, "FME00", designed by EDIBON, allows the study of fluid behaviour, hydraulic theory and the properties of fluid mechanics.It is formed by a movable hydraulics bench used to hold a wide variety of modules, which allow the...

FME00/B

Available

8.1.1.- BASE UNITS

FME00/B

Basic Hydraulic Feed System

The Basic Hydraulic Feed System, "FME00/B", designed by EDIBON is a service unit for different Fluid Mechanics Units as: "FME" type modules, Fluid Friction in Pipes Unit "AFT", etc., increasing the equipment profitability.

FME02

Available

8.1.2.- MEASUREMENT

FME02

Flow over Weirs

The Flow over Weirs, "FME02", designed by EDIBON, has many elements that are used in combination with the Hydraulics Bench (FME00): A special mouthpiece is coupled to the outlet mouthpiece for water in the Hydraulics Bench (FME00).Two soothing...

FME10

Available

8.1.2.- MEASUREMENT

FME10

Dead Weight Calibrator

The Pressure Gauge Calibrator, "FME10", designed by EDIBON, allows the study of the operation of a Bourdon type pressure gauge using a standard set of calibrated weights and the determination and the study of the pressure gauge hysteresis...

FME37

Available

8.1.2.- MEASUREMENT

FME37

Flowmeter Calibrator

The Flowmeter Calibrator, "FME37", designed by EDIBON, allows for the assessment of the accuracy and performance of the most commonly used flow meters. It features a panel of four-tube pressure gauges displaying pressure differences at various...

FME18

Available

8.1.2.- MEASUREMENT

FME18

Flow Meter Demonstration

The Flow Meter Demonstration, "FME18", designed by EDIBON, allows through 3 different flow measurement accessories: Venturi tube, orifice plate and a variable area meter installed in series in the unit, the study to find the flow rate of the fluid...

DEPRESSION MEASUREMENT SYSTEM (VACUUM GAUGE) - FME26

FME26

Available

8.1.2.- MEASUREMENT

FME26

Depression Measurement System (vacuum gauge)

The Depression Measurement System (vacuum gauge), "FME 26", is designed to be connected to the inlet of some flow aspiration system, in a way that we could measure the depression made by the so-called aspiration system. Such system will be...

FME30

Available

8.1.2.- MEASUREMENT

FME30

Transparent Vortex Flow Meter

The Transparent Vortex Flow Meter, "FME30", designed by EDIBON allows to perform studies and experiments of different volumetric and mass flow measurement methods, as well as the comparison of continuous and discontinuous methods.This unit...

FME30/I

Available

8.1.2.- MEASUREMENT

FME30/I

Vortex Flow Meter

The Vortex Flowmeter, "FME30/I", designed by EDIBON, allows to perform different studies and experiments of various volumetric and mass flow measurement methods, as well as the comparison of continuous and discontinuous methods.This unit includes...

FME32

Available

8.1.2.- MEASUREMENT

FME32

Static Pitot Tube

The Static Pitot Tube, "FME32", designed by EDIBON, the change in flow speed within a tube can be determined.The Pitot static tube can be moved across the whole cross-section of the tube, and thus to measure the pressure profile.This tube is...

FME34

Available

8.1.2.- MEASUREMENT

FME34

Fluid Statics and Manometry

The Fluid Statics and Manometry, "FME34", designed by EDIBON, allows the study of static fluids and manometry providing the user with an introduction in the behavior of liquids under hydrostatic conditions (fluids at standstill) and the...

FME36

Available

8.1.2.- MEASUREMENT

FME36

Rotameter

The Rotameter, "FME36", designed by EDIBON, is a device developed for the study of flow measurement in fluid systems. This unit allows students to analyze the operating principle of variable area flowmeters with a float, which are widely used in...

FME38

Available

8.1.6.- HYDRAULIC MACHINES: PUMPS

FME38

Hydraulic Ram Pump

The Hydraulic Ram Pump, "FME38", designed by EDIBON, utilizes the water hammer effect to raise water to a higher level than its power source. It operates by harnessing the rapid change in water velocity in a pipe that occurs when its flow is...

DATA ACQUISITION SYSTEM AND SENSORS - BDAS

BDAS

Available

8.1.7.- HYDRAULIC MACHINES: TURBINES

BDAS

Data Acquisition System and Sensors

BDAS is designed to monitor the measurements of each unit type "FME" from a computer (PC).This system can monitor any unit, checking the revolutions given by the water pump or the torque, differential pressures for Bernoulli theorems, pressure...

FME08

Available

8.1.3.- HYDROSTATICS

FME08

Hydrostatic Pressure

The Surface Pressure Unit, "FME08", designed by EDIBON, allows to study the center of pressures with a partially or totally submerged quadrant.This unit consists of a quadrant mounted on the arm of a balance that pivots around an axis.When the...

METACENTRIC HEIGHT DEMONSTRATION - FME11

FME11

Available

8.1.3.- HYDROSTATICS

FME11

Metacentric Height Demonstration

The Metacentric Height Demonstration Unit, "FME11", designed by EDIBON, allows the study of the stability of a floating object by calculating its metacentric height.The unit consists of a floating methacrylate prismatic base, on which a vertical...

METACENTRIC HEIGHT DEMOSTRATION OF A "V" SHAPED FLOATING BODY - FME11-A

FME11-A

Available

8.1.3.- HYDROSTATICS

FME11-A

Metacentric Height Demostration of a "V" Shaped Floating Body

The Metacentric Height Demostration of a "V" Shaped Floating Object, "FME11-A", designed by EDIBON, allows the study of the stability of a floating object by calculating the metacentric height of a floating object starting from a V-shaped floating...

METACENTRIC HEIGHT DEMOSTRATION OF A "U" SHAPED FLOATING BODY - FME11-B

FME11-B

Available

8.1.3.- HYDROSTATICS

FME11-B

Metacentric Height Demostration of a "U" Shaped Floating Body

The Metacentric Height Demostration of a "U" Shaped Floating Object, "FME11-B", designed by EDIBON, allows the study of the stability of a floating object by calculating its metacentric height starting from a U-shaped floating body.The unit...

PASCAL'S PRINCIPLE DEMONSTRATION - FME33

FME33

Available

8.1.3.- HYDROSTATICS

FME33

Pascal's Principle Demonstration

The Pascal's Principle Demonstration Unit, "FME33", designed by EDIBON, allows to demonstrate Pascal's principle, i.e. that the pressure in an incompressible fluid is independent of the column size section but depends only on its height (liquid...

FME35

Available

8.1.3.- HYDROSTATICS

FME35

Fluid Properties

The Fluid Properties Unit, "FME35", designed by EDIBON, allows the study of the fluids fundamental properties that affect their behavior in practical applications.We can study capillarity, density and relative density (specific gravity), buoyancy...

FME01

Available

8.1.4.- HYDRODYNAMICS

FME01

Jet Impact on Surfaces

The Jet Impact on Surfaces Unit, "FME01", designed by EDIBON, allows the study of the interaction between a moving fluid jet and different impact surfaces, providing a detailed understanding of fluid dynamics principles and their application in...

FOR FURTHER INFORMATION, CONTACT US