8.7.- FLUID MACHINES

A special app,lication area in fluid mechanics is the one responsible for the study of fluid machines. Fluid machines are devices that convert the energy of the fluid that passes through them or transfer energy to the fluid. That fluid can be gas, steam or liquid.

View more

Based on this definition, fluid machines can be classified as follows:

  • Power generating machines.
  • Turbines: torque and power are provided in the shaft as a result of the variation of the amount of motion of the fluid that passes through them.
  • Wind turbines: the kinetic energy of the wind is transformed into mechanical energy.
  • Power consuming machine.
  • Pumps: mechanical energy is supplied to the fluid in the form of work to replace the pressure drop suffered by fluids due to friction in the pipes.
  • Fans: large quantities of gas are moved as a result of the pressure increase generated. There are two basic types of fans: the blower or centrifugal fan and the axial flow fan.
  • Compressors: a lower amount of flow is moved if compared to the fans, but the pressure increase is much higher.

Machines have been designed since ancient times with the purpose of using the energy provided by nature. For example, the conversion of mechanical energy into hydraulic energy by machines is of great interest to most engineers and technicians. Some classical hydraulic machines are the Roman water wheel or the hydraulic press. At present, we are surrounded by fluid machines in our everyday lives. Some examples are the aircraft engines, the circuit pumps in swimming pools or cars, the windmills, the cooling fans in computers or the fans used at home.

View Products

FLUID MACHINES EQUIPMENT

Showing 1-30 of 36 item(s)
COMPUTER CONTROLLED SERIES/PARALLEL PUMPS BENCH - PBSPC
  • PBSPC
Available
8.7.1.- PUMPS

PBSPC

Computer Controlled Series/Parallel Pumps Bench

The Computer Controlled Series/Parallel Pumps Bench, "PBSPC", is designed to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed water tank,...
SERIES/PARALLEL PUMPS BENCH - PBSPB
  • PBSPB
Available
8.7.1.- PUMPS

PBSPB

Series/Parallel Pumps Bench

The Series/Parallel Pumps Bench, "PBSPB", is designed to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed water tank, circulation pipes,...
COMPUTER CONTROLLED CENTRIFUGAL PUMP BENCH - PBCC
  • PBCC
Available
8.7.1.- PUMPS

PBCC

Computer Controlled Centrifugal Pump Bench

The Computer Controlled Centrifugal Pump Bench, "PBCC", is a bench-top unit consists of a centrifugal pump computer controlled, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump...
CENTRIFUGAL PUMP BENCH - PBCB
  • PBCB
Available
8.7.1.- PUMPS

PBCB

Centrifugal Pump Bench

The Centrifugal Pump Bench, "PBCB", is a bench-top unit consists of a centrifugal pump, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump experiments: two manometer and a flow sensor.A...
COMPUTER CONTROLLED GEAR PUMP BENCH - PBEC
  • PBEC
Available
8.7.1.- PUMPS

PBEC

Computer Controlled Gear Pump Bench

The Computer Controlled Gear Pump Bench, "PBEC", is a bench-top unit consists of a gear pump computer controlled, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump experiments: two...
COMPUTER CONTROLLED AXIAL PUMP BENCH - PBAC
  • PBAC
Available
8.7.1.- PUMPS

PBAC

Computer Controlled Axial Pump Bench

The Computer Controlled Axial Pump Bench, "PBAC", is designed to study this type of pumps. It is a bench-top unit that consists of a computer controlled axial pump, a water tank and circulation pipes with a flow regulation valve. Besides, it...
COMPUTER CONTROLLED PISTON PUMP BENCH - PBRC
  • PBRC
Available
8.7.1.- PUMPS

PBRC

Computer Controlled Piston Pump Bench

The Computer Controlled Piston Pump Bench, "PBRC", is a bench-top unit that consists of a piston pump, a feed tank, flow meter tank calibrated for taking flow measurements, circulation pipes, manual valves and a solenoid valve, computer...
COMPUTER CONTROLLED AXIAL FLOW TURBOMACHINES UNIT - HMFAC
  • HMFAC
Available
8.7.3.- TURBINES

HMFAC

Computer Controlled Axial Flow Turbomachines Unit

The Computer Controlled Axial Flow Turbomachines Unit, "HMFAC", allows the study of single-stage axial turbomachines, with interchangeable vanes for the study of both a pump and a turbine.The main part of the unit is the axial turbomachine...
COMPUTER CONTROLLED CENTRIFUGAL FAN TEACHING UNIT - HVCC
  • HVCC
Available
8.7.2.- FANS

HVCC

Computer Controlled Centrifugal Fan Teaching Unit

The Computer Controlled Centrifugal Fan Teaching Unit, "HVCC", allows the students to study the operation characteristics of a centrifugal fan. For that purpose, the unit carries out the measurements of flow, speed, temperature, pressure and...
CENTRIFUGAL FAN TEACHING UNIT - HVCB
  • HVCB
Available
8.7.2.- FANS

HVCB

Centrifugal Fan Teaching Unit

The Centrifugal Fan Teaching Unit, "HVCB", allows the students to study the operation characteristics of a centrifugal fan. For that purpose, the unit carries out the measurements of flow, speed, temperature and humidity. Multiple tests related to...
COMPUTER CONTROLLED AXIAL FAN TEACHING UNIT - HVAC
  • HVAC
Available
8.7.2.- FANS

HVAC

Computer Controlled Axial Fan Teaching Unit

The Computer Controlled Axial Fan Teaching Unit, "HVAC", allows the observation, the study and the working process analysis of an axial-flow fan.The main element of this unit is a computer controlled speed centrifugal fan, which is measured...
AXIAL FAN TEACHING UNIT - HVAB
  • HVAB
Available
8.7.2.- FANS

HVAB

Axial Fan Teaching Unit

The Axial Fan Teaching Unit, "HVAB", allows the observation, the study and the working process analysis of an axial-flow fan.The main element of this unit is a variable speed centrifugal fan, which is measured through a speed sensor, and a...
COMPUTER CONTROLLED PELTON TURBINE - TPC
  • TPC
Available
5.3.6.- HYDRAULIC ENERGY

TPC

Computer Controlled Pelton Turbine

The Computer Controlled Pelton Turbine, "TPC", designed by EDIBON, consists of a small-scale Pelton turbine, with a valve that allows the flow to be regulated. The turbine includes a PELTON runner with 16 buckets, which can be clearly seen through...
COMPUTER CONTROLLED FRANCIS TURBINE - TFC
  • TFC
Available
5.3.6.- HYDRAULIC ENERGY

TFC

Computer Controlled Francis Turbine

The Computer Controlled Francis Turbine, "TFC", consists of a small-scale Francis Turbine, with a valve that allows flow regulation and has a ring with adjustable guide vanes that allows control of the angle of incidence of the water in the...
COMPUTER CONTROLLED KAPLAN TURBINE - TKC
  • TKC
Available
5.3.6.- HYDRAULIC ENERGY

TKC

Computer Controlled Kaplan Turbine

The Computer Controlled Kaplan Turbine, "TKC", consists of a small-scale Kaplan turbine that has a ring with adjustable guide vanes, which allow the control of water flow in the turbine.In order to raise the fluid, it has a computer controlled...
COMPUTER CONTROLLED RADIAL FLOW TURBINE - TFRC
  • TFRC
Available
5.3.6.- HYDRAULIC ENERGY

TFRC

Computer Controlled Radial Flow Turbine

The Computer Controlled Radial Flow Turbine, "TFRC", consists of a small-scale radial flow turbine with two nozzles at 90 degrees to the perpendicular direction of the axis of rotation.In order to raise the fluid, it has a computer controlled pump...
COMPUTER CONTROLLED AXIAL FLOW TURBINE - TFAC
  • TFAC
Available
5.3.6.- HYDRAULIC ENERGY

TFAC

Computer Controlled Axial Flow Turbine

The Computer Controlled Axial Flow Turbine, "TFAC", consists of a small-scale turbine with single-stage axial flow input. It has eight nozzles that act as water rings to the rotor, four of which have an incidence angle of 20º and the other four of...
COMPUTER CONTROLLED EXPERIMENTAL REACTION TURBINE - HTRC
  • HTRC
Available
5.3.6.- HYDRAULIC ENERGY

HTRC

Computer Controlled Experimental Reaction Turbine

The Experimental Reaction Turbine, Computer Controlled (PC), "HTRC", allows to study the characteristics of operation of a small scale reaction turbine.This unit includes suitable instrumentation to measure the main parameters:There is a pressure...
COMPUTER CONTROLLED EXPERIMENTAL IMPULSE TURBINE - HTIC
  • HTIC
Available
5.3.6.- HYDRAULIC ENERGY

HTIC

Computer Controlled Experimental Impulse Turbine

The Computer Controlled Experimental Impulse Turbine, "HTIC", allows to study the characteristics and the behavior of a small scale impulse turbine.This unit includes suitable instrumentation to measure the main parameters:There is a pressure...
COMPUTER CONTROLLED HYDRAULIC TURBINES MODULAR UNIT - HTMC
  • HTMC
Available
8.7.3.- TURBINES

HTMC

Computer Controlled Hydraulic Turbines Modular Unit

Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
FRANCIS TURBINE MODEL - HT-F
Available
8.7.3.- TURBINES

HT-F

Francis Turbine Model

Accessory of HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
AXIAL FLOW TURBINE MODEL - HT-FA
Available
8.7.3.- TURBINES

HT-FA

Axial Flow Turbine Model

Accessory of HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
RADIAL FLOW TURBINE MODEL - HT-FR
Available
8.7.3.- TURBINES

HT-FR

Radial Flow Turbine Model

Accessory of HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
KAPLAN TURBINE MODEL - HT-K
Available
8.7.3.- TURBINES

HT-K

Kaplan Turbine Model

Accessory of HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
PELTON TURBINE MODEL - HT-P
Available
8.7.3.- TURBINES

HT-P

Pelton Turbine Model

Accessory of HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
COMPUTER CONTROLLED WIND ENERGY UNIT - EEEC
  • EEEC
Available
5.3.3.- WIND ENERGY

EEEC

Computer Controlled Wind Energy Unit

The Computer Controlled Wind Energy Unit, "EEEC", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The...
WIND ENERGY UNIT - EEE
  • EEE
Available
5.3.3.- WIND ENERGY

EEE

Wind Energy Unit

The Wind Energy Unit, "EEE", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The unit consists of a...
Ask for information