7.4.- INSTALLATIONS AND MAINTENANCE

The needs of today's society are a challenge for any industry, since they have to be in continuous evolution and renewal to adapt to those needs.

In recent years, as a result of the new industrial revolution or "Industry 4.0", the emergence of the "Industrial Internet of Things" ("IIoT") and the "Smart Factories", that adaptation is possible thanks to the application of the most sophisticated techniques in the design of new facilities or in the renovation of existing ones.

In spite of all these technological advances and the exhaustive controls carried out, it should not be forgotten that any element that take part in the productive process is going to be subjected to a mechanical and electrical wear (efforts, loads, etc.) and its useful life is limited. To avoid catastrophic failures, stoppages in production or any type of process that implies an increase of non-productive times and, therefore, an increase of costs, it is extremely important to carry out a good maintenance of machinery, electrical systems, etc.

Traditionally, only two types of maintenance were considered:

Corrective: the fault is solved once it has already occurred.
Preventive: periodic review of all those problematic elements and their replacement if required.

These types of maintenance involve very high and unnecessary costs in most cases. Nowadays, thanks to the available technology, it is possible to carry out predictive maintenance consisting of a comprehensive analysis of all those variables that take part in all the components of a system and be able to replace them at the right time.

But, if more control over the failures that can suffer all those mechanical components subject to wear is preferred, there is another type of maintenance, known as proactive maintenance. It goes one step further than the predictive maintenance, looking for the root of the problem.

View Products

INSTALLATIONS AND MAINTENANCE EQUIPMENT

Select Subgroup

Showing 1-12 of 37 item(s)

CUTAWAY MODELS OF TRANSMISSION OF MOTION UNITS - CMTM

CMTM

Available

7.4.1.- CUTAWAY MODELS

CMTM

Cutaway Models of Transmission of Motion Units

Mechanical transmission is any device that propagates power between two or more elements of a machine. The most common mechanical transmissions are cables, chains, belts, gears, pulleys, friction wheels, friction discs, camshafts,...

UNIT TO STUDY A WORM GEAR CUTAWAY MODEL - WGCM

Accessory of CMTM

Available

7.4.1.- CUTAWAY MODELS

WGCM

Unit to Study a Worm Gear Cutaway Model

Accessory of CMTM

The Unit to Study a Worm Gear Cutaway Model provides insight into the operation of this transmission system, consisting of a helical worm screw and a circular cogwheel.This type of transmission is widely used in automatic doors, elevators, and...

UNIT TO STUDY A MITRE GEAR CUTAWAY MODEL - MGCM

Accessory of CMTM

Available

7.4.1.- CUTAWAY MODELS

MGCM

Unit to Study a Mitre Gear Cutaway Model

Accessory of CMTM

The Unit to Study a Mitre Gear Cutaway Model provides a detailed study of this transmission system, composed of two conical cogwheels, designed to transmit motion between two intersecting shafts, usually positioned at a right angle.Due to their...

UNIT TO STUDY A SPUR GEAR CUTAWAY MODEL - SGCM

Accessory of CMTM

Available

7.4.1.- CUTAWAY MODELS

SGCM

Unit to Study a Spur Gear Cutaway Model

Accessory of CMTM

The Unit to Study a Spur Gear Cutaway Model provides insight into the operation of this transmission system, characterized by teeth parallel to the axis of rotation, allowing for direct power transmission with high efficiency.This type of gear is...

UNIT TO STUDY A TWO-STAGE SPUR GEAR CUTAWAY MODEL - SGCM/2

Accessory of CMTM

Available

7.4.1.- CUTAWAY MODELS

SGCM/2

Unit to Study a Two-Stage Spur Gear Cutaway Model

Accessory of CMTM

The Unit to Study a Two-Stage Spur Gear Cutaway Model provides an in-depth analysis of these systems, which utilize two pairs of spur gears in series to achieve greater speed reduction and more efficient torque transmission.These systems are...

UNIT TO STUDY A PLANETARY GEAR CUTAWAY MODEL - PGCM

Accessory of CMTM

Available

7.4.1.- CUTAWAY MODELS

PGCM

Unit to Study a Planetary Gear Cutaway Model

Accessory of CMTM

The Unit to Study a Planetary Gear Cutaway Model provides an in-depth analysis of this type of transmission, which consists of one or more external (planet) gears rotating around a central (sun) gear.Planetary gears are widely used in vehicle...

UNIT TO STUDY A VARIABLE SPEED TRAPEZOIDAL BELT DRIVE CUTAWAY MODEL - BDCM

Accessory of CMTM

Available

7.4.1.- CUTAWAY MODELS

BDCM

Unit to Study a Variable Speed Trapezoidal Belt Drive Cutaway Model

Accessory of CMTM

The Unit to Study a Variable Speed Trapezoidal Belt Drive Cutaway Model provides insight into the operation of continuously variable transmissions (CVT), where the speed ratio changes progressively and seamlessly, allowing for automatic torque...

UNIT TO STUDY A CONTROL GEAR CUTAWAY MODEL - CGCM

Accessory of CMTM

Available

7.4.1.- CUTAWAY MODELS

CGCM

Unit to Study a Control Gear Cutaway Model

Accessory of CMTM

The Unit to Study a Control Gear Cutaway Model provides an in-depth analysis of these gears, which are designed to adjust the spacing between teeth, ensuring precise control in various mechanical applications.These gears are essential in precision...

UNIT TO STUDY A MULTIPLE-DISC CLUTCH CUTAWAY MODEL - DCCM

Accessory of CMTM

Available

7.4.1.- CUTAWAY MODELS

DCCM

Unit to Study a Multiple-Disc Clutch Cutaway Model

Accessory of CMTM

The Unit to Study a Multiple-Disc Clutch Cutaway Model provides insight into the operation of this clutch system, which uses multiple friction discs to increase torque transmission capacity.This type of clutch is widely used in chain tractor...

UNIT TO STUDY A BEARING CUTAWAY MODEL - BCM

Accessory of CMTM

Available

7.4.1.- CUTAWAY MODELS

BCM

Unit to Study a Bearing Cutaway Model

Accessory of CMTM

The Unit to Study a Bearing Cutaway Model allows for an in-depth examination of this mechanical component, essential in industry for supporting loads while enabling relative motion between two contacting surfaces.Bearings play a fundamental role...

UNIT TO STUDY A SHAFT WITH JOURNAL BEARINGS ASSEMBLY - SJBA

SJBA

Available

7.4.2.- DETACHABLE MODELS

SJBA

Unit to Study a Shaft with Journal Bearings Assembly

The Unit to Study a Shaft with Journal Bearings Assembly, "SJBA", unit consists of two shaft bearings at the ends and a ground steel shaft. The slide bearing consists of two parts, the bearing itself, which is the part of the assembly that is in...

UNIT TO STUDY A HYDRODYNAMIC JOURNAL BEARING ASSEMBLY - HJBA

HJBA

Available

7.4.2.- DETACHABLE MODELS

HJBA

Unit to Study a Hydrodynamic Journal Bearing Assembly

The Unit to Study a Hydrodynamic Journal Bearing Assembly, "HJBA", is a horizontally sectioned hydrodynamic bearing. For an even transfer of the generated forces to the lower part of the bearing case, the bearings in said case are supported by a...

FOR FURTHER INFORMATION, CONTACT US