7.1.- MECHANICAL ENGINEERING

Mechanical engineering is the application of physics to the elements that surround us to improve existing mechanical devices or create new ones. Since it is based on physical principles, its origin goes back to the origin of those principles and its development is closely linked to the advances in mechanics. Nevertheless, it was not until the invention of the steam engine that it became one of the pillars of the development of the industry.

The Industrial Revolution of the seventeenth century took place as a result of the creation of this device. From that moment, with the contributions of scientists and engineers as important as Watt, Stephenson, Tesla or Rankine, an unprecedented renewal of both concept and development of new machines began.

The concept of industry, as it was known till that moment, changed with the development of those machines. Mass production was implemented, machine designs were improved and, consequently, the range of production processes increased, resulting in an unthinkable variety of new products adapted to the needs of society.

Within the mechanical engineering, it is worth mentioning the following fields of study and application:

Mechanisms.
Structures.
Dynamics.
Vibrations.
Oscillations.

At present, any industry, from food to aerospace, must be at the highest level of technological innovation. Therefore, research and development of new devices is particularly important to always have the latest technology and to be at the level required by the industry 4.0.

View Products

Related Materials

MECHANICAL ENGINEERING EQUIPMENT

Showing 61-89 of 89 item(s)

DYNAMIC FRICTION OF A PIN ON A DISC - MEMT-3

Accessory of MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-3

Dynamic Friction of a Pin on a Disc

Accessory of MEMT

This unit allows to study the friction forces between several vertical friction pins of different materials and a rotating friction disc.The end of each vertical pin is made of a different material and rubs against the rotating steel disc. The...

Accessory of MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-4

Rolling Friction in Wheels

Accessory of MEMT

This module allows to determine the slip forces between two rotating friction discs in contact.The slip between the discs is maintained constant by a gearbox. The pressure can be adjusted with a lever and a set of weights. The unit includes a...

Accessory of MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-5

Elastohydrodynamic Lubrication

Accessory of MEMT

This unit allows to investigate the thickness and characteristics of a lubricant film on a rolling sphere.The unit consists in a steel sphere and a driven glass disc.The sphere is pressed against the underside of the glass disc. The light from a...

Accessory of MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT-6

Friction Vibration

Accessory of MEMT

This module allows to demonstrate the static friction, the sliding friction, the related friction vibrations and the slip-stick effects.Several weights are placed on a horizontally rotating friction disc. It is prevented from turning by a cord....

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MCD

Thin Cylinder Unit

The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...

UNIT FOR STUDYING BEARING FRICTION - MBF

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MBF

Unit for Studying Bearing Friction

The Unit for Studying Bearing Friction, "MBF", has been designed by EDIBON to study sliding friction in slide bearings and rolling bearings. Since rolling friction is very little, rotational dynamics basic tests can be performed with the inertia...

BELT FRICTION UNIT WITH DYNAMOMETERS - MCF/A

MCF/A

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MCF/A

Belt Friction Unit with Dynamometers

The Belt Friction Unit with Dynamometers, "MCF/A", allows studies and investigations to compare the friction coefficient for a given contact angle of a flat belt and a V-belt.With this unit it is possible to observe the relationship between...

MCPG

Available

7.1.6.- STRUCTURAL MECHANICS

MCPG

Thick Walled Cylinder Unit

In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...

UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG

MFPG

Available

7.1.6.- STRUCTURAL MECHANICS

MFPG

Unit for studying Forces in a Jib Crane

The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...

Available

7.1.6.- STRUCTURAL MECHANICS

MVS

Suspension Bridge Unit

The Suspension Bridge Unit, "MVS", has been meticulously designed by EDIBON to explore the dynamics of stresses in a suspension bridge system. This unit simulates a suspension bridge using a deck and two parallel main cables, allowing students to...

MARP

Available

7.1.6.- STRUCTURAL MECHANICS

MARP

Parabolic Arch Unit

The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.One support of the arch is fixed whereas the...

MART

Available

7.1.6.- STRUCTURAL MECHANICS

MART

Three-Hinged Arch Unit

The Three-Hinged Arch Unit "MART" allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...

UNIT FOR STUDYING FORCES IN A SIMPLE BAR STRUCTURE - MFBS

MFBS

Available

7.1.6.- STRUCTURAL MECHANICS

MFBS

Unit for Studying Forces in a Simple Bar Structure

The Unit for Studying Forces in a Simple Bar Structure, "MFBS", designed by EDIBON allows the study of forces acting on a simple truss when is subjected to a point load in one of the nodes that make up the structure.It consists of a group of five...

UNIT FOR STUDYING FORCES IN DIFFERENT SINGLE PLANE TRUSSES - MFCS1

MFCS1

Available

7.1.6.- STRUCTURAL MECHANICS

MFCS1

Unit for studying Forces in Different Single Plane Trusses

The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the experimental bar forces...

UNIT FOR STUDYING FORCES IN AN OVERDETERMINATE TRUSS - MFCS2

MFCS2

Available

7.1.6.- STRUCTURAL MECHANICS

MFCS2

Unit for studying Forces in an Overdeterminate Truss

The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in the single plane...

UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3

MFCS3

Available

7.1.6.- STRUCTURAL MECHANICS

MFCS3

Unit for studying Deformation of Trusses

The Unit for studying Deformation of Trusses, "MFCS3", allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the experimental forces in the...

Available

7.1.6.- STRUCTURAL MECHANICS

MFL

Two Hinged Arch Unit

The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...

Available

7.1.6.- STRUCTURAL MECHANICS

MPO

Portal Frame Unit

The Portal Frame Unit, "MPO", designed by EDIBON, allows for precise measurements of vertical and horizontal deflection in an embedded rectangular portal frame. By applying various loads with specific weights, changes in the portal frame’s...

Available

7.1.6.- STRUCTURAL MECHANICS

STH

Stress Hypotheses Unit

The Stress Hypotheses Unit, "STH", allows the study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are applied, avoiding...

SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE

MEPE

Available

7.1.6.- STRUCTURAL MECHANICS

MEPE

Simple Stability Problems Study Unit

The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...

UNIT FOR STUDYING METHODS TO DETERMINE THE ELASTIC LINE - MDLE

MDLE

Available

7.1.6.- STRUCTURAL MECHANICS

MDLE

Unit for studying Methods to Determine the Elastic Line

The Unit for studying Methods to Determine the Elastic Line, "MDLE", consists of set of beams, several supports (with clamp fixing and dial gauges, and with force gauge), a device to generate a bending moment, fixed pulleys, dial gauges and a set...

UNIT TO STUDY STRESS ON A MEMBRANE - SSM

Available

7.1.6.- STRUCTURAL MECHANICS

SSM

Unit to Study Stress on a Membrane

The Unit to Study Stress on a Membrane, "SSM", designed by EDIBON, allows the study of stresses and deformations in a thin disc or membrane subjected to different compressive stresses.The main element of the equipment is a thin disc or membrane...

Available

7.1.6.- STRUCTURAL MECHANICS

MVV

Unsymmetrical Cantilever Unit

The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...

Available

7.3.2.1.- MECHANICAL TEST

MDB

Deflection of Curved Bars Unit

The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...

Available

7.3.2.1.- MECHANICAL TEST

MFV

Beam Deflection Unit

The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...

MFLT

Available

7.3.2.1.- MECHANICAL TEST

MFLT

Strut Buckling Unit

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...

MEBM

Available

7.3.2.1.- MECHANICAL TEST

MEBM

Euler Buckling Modes Unit

With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...

Available

7.3.2.1.- MECHANICAL TEST

MUP

Universal Buckling Unit

The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...

SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF

Available

7.3.2.1.- MECHANICAL TEST

MMF

Shear Force and Bending Momentum Unit

The Shear Force and Bending Momentum Unit, "MMF", unit is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the application of one...

FOR FURTHER INFORMATION, CONTACT US