7.2.- AUTOMOTIVE MECHANICAL ENGINEERING

The automotive industry is one of the main applications of current mechanical engineering. The vehicle with gasoline internal combustion engine is considered the greatest invention of the 20th century, although the first prototypes were already made at the end of the 18th century. The first prototype dates from 1769. It was a steam carriage. It was not successful but it set the precedents for the development of the gasoline engine in 1860. From this discovery, an unstoppable development began and automotive industries like Benz, Peugeot, Fiat or Ford proliferated. With the turn of the millennium, the use of other fossil fuels, such as diesel, began to be investigated.

Nowadays, using all the available technology and means, one can get to know the behavior of all the elements that make up a vehicle in an infinite number of situations. This level of knowledge is possible thanks to the engineering behind each design, analysis, etc. Some of the most studied systems are:

Transmission.
Brakes.
Suspension.
Engine performance.
Electronics.
Emissions.
Safety.

The industries related to the automotive sector have to be continuously upgraded, researching and applying all the technical advances at their reach to be competitive and to satisfy the needs of today's society. The trend in this sector is the search for more sustainable and environmentally friendly sources of energy, as well as more efficient designs with higher performance, which have become a reality with the appearance of hybrid and electric vehicles and vehicles propelled by other fuels, such as liquefied petroleum gas (LPG) or hydrogen.

View Products

AUTOMOTIVE MECHANICAL ENGINEERING EQUIPMENT

Select Subgroup

Showing 1-23 of 23 item(s)

Available

7.2.1.- BRAKES AND CLUTCHES

MFT

Drum Brake Unit

The Drum Brake Unit, "MFT", allows the study of the forces acting on a drum brake, the difference between the braking torque of the primary shoe and secondary shoe braking systems and determining the coefficient of friction between the drum and...

Available

7.2.1.- BRAKES AND CLUTCHES

MFD

Disc Brake Unit

This unit "MFD" has been designed to carry out experiments to investigate the relationship between the normal force acting on the brake pads, the effective radius of the brake pads and the braking torque.The brake pads are located on bell crank...

BRAKING AND ACCELERATING FORCES UNIT - MFF

Available

7.2.1.- BRAKES AND CLUTCHES

MFF

Braking and Accelerating Forces Unit

With the Braking and Accelerating Forces Unit, "MFF", practices and experiments can be carried out to study the relationship between the forces involved in the braking and acceleration of a vehicle. It also allows demonstrating the relationship...

Available

7.2.1.- BRAKES AND CLUTCHES

MEM

Plate Clutch

The Plate Clutch, "MEM", allows to demonstrate the influence of the friction surface and the applied pressure of the springs on the transmitted torque for a friction clutch. To this end, several clutch discs with different diameters and...

Available

7.2.1.- BRAKES AND CLUTCHES

MSH

Simple Hydraulic Unit

The Simple Hydraulic Unit, "MSH", has been designed for studies related to mechanical engineering and motor vehicles. It is used to demonstrate how a liquid can be used to transmit a force.The unit can also be used to conduct experiments to study...

MESE-T

Available

7.1.2.2.- GEARS

MESE-T

Geared Study

The Geared Study Drive Unit, "MESE", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission.For the...

Available

7.2.2.- GEARS, DIFFERENTIALS AND TRANSMISSIONS

MCC

Gearbox

The Gearbox unit, "MCC", has been designed to represent the typical position of a simple gearbox with three gears ratio and reverse.Basically, the gearbox consists of several gears of different size that can be meshed as required. Those gears are...

MTE1

Available

7.2.2.- GEARS, DIFFERENTIALS AND TRANSMISSIONS

MTE1

Epicyclic Gear Unit (1 element)

The Epicyclic Gear Unit (1 element), "MTE1", includes a set of epicyclic gears that allows the student to study different reduction ratios (direct drive and overdrive), as well as torque conversion.A simple epicyclic gears set consists of:Sun gear...

MTE2

Available

7.2.2.- GEARS, DIFFERENTIALS AND TRANSMISSIONS

MTE2

Epicyclic Gear Unit (2 elements)

The Epicyclic Gear Unit (2 elements), "MTE2", consists of two coupled epicyclic gears sets. It will allow the students to carry out experiments of different gear ratios, as well as the torque conversions.The epicyclic gears installed in the...

MTE3

Available

7.2.2.- GEARS, DIFFERENTIALS AND TRANSMISSIONS

MTE3

Epicyclic Gear Unit (3 elements)

The Epicyclic Gear Unit (3 elements), "MTE3", consists of three coupled epicyclic gears sets. It will allow the students to carry out experiments of different gear ratios, as well as the torque conversions.The epicyclic gears installed in the...

BORG-WARNER AUTOMATIC TRANSMISSION - MBW

Available

7.2.2.- GEARS, DIFFERENTIALS AND TRANSMISSIONS

MBW

Borg-Warner Automatic Transmission

The main distinguishing element of automatic transmissions is its group of epicyclic gearing.The gear assembly of the "MBW" unit consists of:Two sun gears, one to transfer forward gear ratios and one reverse gear.Two sets of planet gears: long and...

DIFFERENTIAL-CROWNWHEEL AND PINION - MDC

Available

7.2.2.- GEARS, DIFFERENTIALS AND TRANSMISSIONS

MDC

Differential-Crownwheel and Pinion

The Differential-Crownwheel and Pinion, "MDC", designed by EDIBON, simulates a differential mechanism. The function of the differential mechanism is to enable the drive wheels rotate at different speeds, regardless of whether they are the front or...

Available

7.2.2.- GEARS, DIFFERENTIALS AND TRANSMISSIONS

MEC

Overdrive Unit

The Overdrive Unit, "MEC", includes a set of epicyclical gears that represent an application of a simple epicyclic arrangement of the type used in a motor vehicle overdrive.Simple epicyclic set consists of:Sun gear that rotates together with the...

COMPUTER CONTROLLED BALANCE OF RECIPROCATING MASSES UNIT - MBMRC

MBMRC

Available

7.1.3.- STATICS AND DYNAMICS

MBMRC

Computer Controlled Balance of Reciprocating Masses Unit

The Computer Controlled Balance of Reciprocating Masses Unit, "MBMRC", is a bench-mounting unit that allows to investigate and examine the free masses and moments of a reciprocating engine with a single cylinder, with two cylinders or with four...

Available

7.1.3.- STATICS AND DYNAMICS

MED

Static and Dynamic Balancing Unit

The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...

COMPUTER CONTROLLED TEST BENCH FOR 2.2 KW ENGINES - TBMC3

TBMC3

Available

7.2.3.- ENGINES

TBMC3

Computer Controlled Test Bench for 2.2 kW Engines

The Computer Controlled Test Bench for Single-Cylinder Engines, 2.2 kW, "TBMC3", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 2.2 kW.The unit has an element to exert the braking torque, an asynchronous motor...

COMPUTER CONTROLLED TEST BENCH FOR 7.5 KW ENGINES - TBMC8

TBMC8

Available

7.2.3.- ENGINES

TBMC8

Computer Controlled Test Bench for 7.5 kW Engines

The Computer Controlled Test Bench for Single-Cylinder Engines, 7.5 kW, "TBMC8", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 7.5 kW.The element of the unit that offers load torque is an eddy current...

COMPUTER CONTROLLED TEST BENCH FOR 11 KW ENGINES - TBMC12

TBMC12

Available

7.2.3.- ENGINES

TBMC12

Computer Controlled Test Bench for 11 kW Engines

The Computer Controlled Test Bench for Single-Cylinder and Two-Cylinders Engines, 11 kW, "TBMC12", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 11 kW.The element of the unit that offers load torque is an eddy...

COMPUTER CONTROLLED TEST BENCH FOR 75 KW ENGINES - TBMC75

TBMC75

Available

7.2.3.- ENGINES

TBMC75

Computer Controlled Test Bench for 75 kW Engines

The Computer Controlled Test Bench for Four Cylinders Engines, 75 kW, "TBMC75", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 75 kW.The element of the unit that offers load torque is an eddy current...

COMPUTER CONTROLLED EXHAUST GAS CALORIMETER - TBMC-CG

TBMC-CG

Available

7.2.3.- ENGINES

TBMC-CG

Computer Controlled Exhaust Gas Calorimeter

The Computer Controlled Exhaust Gas Calorimeter, "TBMC-CG", is mounted on a laminated aluminium profiles frame and panels in painted steel.The main element consists on a double-wall tank made in stainless steel. Through the tank interior the...

TBMC-AGE

Available

7.2.3.- ENGINES

TBMC-AGE

Exhaust Gas Analyzer

Measurement of the volumetric concentrations according to the procedure of nondispersiva infrared absorption.Engines selection: gasoline, butane, propane, 2/4 times, 1/2/3/4/5/6/8/12 cylinders.Fast warm-up of the measure cell.Auto-check...

TBMC-AGE/NOx

Available

7.2.3.- ENGINES

TBMC-AGE/NOx

Exhaust Gas Analyzer (NOx)

COMPUTER CONTROLLED TEST BENCH FOR HYBRID ENGINE - TMHC

TMHC

Available

7.2.3.- ENGINES

TMHC

Computer Controlled Test Bench for Hybrid Engine

The Computer Controlled Test Bench for Hybrid Engine, "TMHC", is a teaching unit that allows to study and analyze the power source of a hybrid vehicle, consisting on a combination of an electrical motor and an internal combustion engine.These two...

FOR FURTHER INFORMATION, CONTACT US