9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

Certain environmental conditions are needed in many life situations, for example, in an industrial environment, a house or a greenhouse. According to the requirements, the air parameters can be modified with the aid of specific equipment.

Under normal conditions, the air has a mass content of around 23% oxygen, 76% nitrogen and 1% gases and vapors. Among the gases and vapors the most important is water vapor. Although its proportion is very small, it is very importance in the rate of evaporation of wet surfaces and materials.

The air conditioning and ventilation systems modify air humidity and other parameters, such as temperature and pressure.

As the air parameters are modified, water heating systems are used to obtain specific conditions.

In the everyday life, water can be heated for sanitation purposes (bathrooms, showers) and for other cleaning purposes or for heating. According to its later use, the water is conditioned with a heating system.

Sanitary water can be prepared in two ways:

By storage: hot water is stored in a tank for the intended uses.
By instantaneous heating: water flows through a coil heated directly by a flame or heat exchanger.

A heating system raises or maintains the air temperature. It consists of three parts:

A heat generation system: it can be a fuel boiler, a system operated by heating elements or another system.
A distribution system: pipes through which hot water or air flows.
An emission system: radiators, grilles, specific supply elements.

Any of the water heating methods, regardless of the use, must be evaluated, since the energy efficiency variability is very large.

View Products

Related Materials

HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER EQUIPMENT

Select Group

Showing 1-24 of 24 item(s)

COMPUTER CONTROLLED HOT WATER PRODUCTION AND HEATING TEACHING UNIT - EACC

EACC

Available

9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

EACC

Computer Controlled Hot Water Production and Heating Teaching Unit

The main element of the Computer Controlled Hot Water Production and Heating Teaching Unit, "EACC", is the boiler. Its function is the heating of the water that will flow through the other elements transferring its heat. It is a low temperature...

COMPUTER CONTROLLED BIOMASS PROCESS UNIT - EBMC

EBMC

Available

5.3.7.- BIOFUELS

EBMC

Computer Controlled Biomass Process Unit

The main element of the unit is the biomass boiler, which will heat the water that will flow through the other components transferring its heat.The boiler is a biomass boiler of 16 kW that works with pellet and other granulated fuels. The body of...

EBMB

Available

5.3.7.- BIOFUELS

EBMB

Biomass Process Unit

COMPUTER CONTROLLED UNIT TO STUDY THE EFFICIENCY OF A HEATING SYSTEM - TEHSC

TEHSC

Available

9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

TEHSC

Computer Controlled Unit to Study the Efficiency of a Heating System

The Computer Controlled Unit to Study the Efficiency of a Heating System, "TEHSC",designed by EDIBON allows for studying and analyzing a closed heating system made upof pipes with different diameter and fittings normally used in real heating...

Available

9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

WHT

Water Heaters Training Unit

The Water Heater Training Unit, "WHT", allows demonstrating the operation of three types of water heaters. The unit has three heaters, two of them commercial one with electronic ignition and one in millivolt, and a residential gas heater without...

HEAT PUMP FOR DIFFERENT HEAT SOURCES AND HEAT EXCHANGERS - HPSE

HPSE

Available

9.3.- HEAT PUMPS

HPSE

Heat Pump for different Heat Sources and Heat Exchangers

The Heat Pump for different Heat Sources and Heat Exchangers, "HPSE", represents the typical compressor compression refrigeration plant. The compressor is of the scroll type, which is a positive displacement compressor.The evaporator and condenser...

UNDERFLOOR HEATING AND/OR HEAT SOURCE FOR HEAT PUMP - UHHS

UHHS

Available

9.3.- HEAT PUMPS

UHHS

Underfloor Heating and/or Heat Source for Heat Pump

The Underfloor Heating and/or Heat Source for Heat Pump, "UHHS", designed by EDIBON, allows the visualization of a piping system that simulates a radiant floor heating system and its functions as a heat sink. It can also be used as a heat source...

FAN HEATER AND/OR AIR HEAT EXCHANGER - FHAH

FHAH

Available

9.3.- HEAT PUMPS

FHAH

Fan Heater and/or Air Heat Exchanger

The unit Fan Heater and/or Air Heat Exchanger, "FHAH", designed by EDIBON, allows the visualization of a fan heater and its functions as a heat sink. It can also be used as a heat source working in conjunction with a heat pump.The main component...

COMPUTER CONTROLLED AIR CONDITIONING LABORATORY UNIT - TAAC

TAAC

Available

9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

TAAC

Computer Controlled Air Conditioning Laboratory Unit

The Computer Controlled Air Conditioning Laboratory Unit, "TAAC", has been designed to study the change of the air conditions and the refrigeration circuit.The unit consists of a testing tunnel made of stainless steel, in which there have...

TAAB

Available

9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

TAAB

Air Conditioning Laboratory Unit

The Air Conditioning Laboratory Unit, "TAAB", has been designed to study the change of the air conditions and the refrigeration circuit. The unit consists of a testing tunnel made in stainless steel, in which there have installed two windows....

COMPUTER CONTROLLED RECIRCULATING AIR CONDITIONING UNIT - TARC

TARC

Available

9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

TARC

Computer Controlled Recirculating Air Conditioning Unit

The Computer Controlled Recirculating Air Conditioning Unit, "TARC", has been designed to study both the changes in the air conditions and the refrigeration circuit. For that purpose, temperature sensors, pressure sensors and flow meters have been...

RECIRCULATING AIR CONDITIONING UNIT - TARB

TARB

Available

9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

TARB

Recirculating Air Conditioning Unit

The Recirculating Air Conditioning Unit, "TARB", has been designed to study both the changes in the air conditions and the refrigeration circuit. For that purpose, temperature sensors, pressure meters and flow meters have been strategically...

COMPUTER CONTROLLED AUTOMOBILE AIR CONDITIONING UNIT - TAAUC

TAAUC

Available

9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

TAAUC

Computer Controlled Automobile Air Conditioning Unit

The objective of the Computer Controlled Automobile Air Conditioning Unit, "TAAUC", designed by EDIBON, is to introduce the student into the complex world of air conditioning systems, as well as to study and determine the optimum parameters for...

TAAU

Available

9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

TAAU

Automobile Air Conditioning Unit

The objective of the Automobile Air Conditioning Unit, "TAAU", designed by EDIBON is to introduce the student into the complex world of air conditioning systems, as well as to study and determine the optimum parameters for the operation of the...

COMPUTER CONTROLLED AIR CONDITIONING UNIT WITH CLIMATIC CHAMBER AND WATER CHILLER - TACC

TACC

Available

9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

TACC

Computer Controlled Air Conditioning Unit with Climatic Chamber and Water Chiller

The Computer Controlled Air Conditioning Unit with Climatic Chamber and Water Chiller, "TACC", is an actual air conditioning system with climatic chamber suitable for people and allows the study of the influence of different operation modes of the...

COMPUTER CONTROLLED AIR CONDITIONING UNIT WITH CLIMATIC CHAMBER - TSAC

TSAC

Available

9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

TSAC

Computer Controlled Air Conditioning Unit with Climatic Chamber

The Computer Controlled Air Conditioning Unit with Climatic Chamber, "TSAC", designed by EDIBON, is clearly arranged and represents a complete air conditioning system with an air duct and a climatic chamber.The main components of the air...

COMPUTER CONTROLLED AIR DUCT SYSTEMS UNIT - TSCAC

TSCAC

Available

9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

TSCAC

Computer Controlled Air Duct Systems Unit

With the Computer Controlled Air Duct Systems Unit, "TSCAC", the user will study the air distribution under different configurations thanks to the supports included with the unit. The user himself will assemble the air ducts using usual elements...

TACS

Available

9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

TACS

Split Air Conditioner Unit

The Split Air Conditioner Unit, "TACS", designed by EDIBON allows the study of the operation of a split system air conditioner with heat pump function to heat or cool, apart from other operation modes available.The main element of the Split Air...

TMHA

Available

9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER

TMHA

Air Humidity Measurement Unit

The Air Humidity Measurement Unit, "TMHA", enables the differences in accuracy between different instruments to measure the air relative humidity. It also includes a fan to show the effects of airflow on the different instruments. A mobile...

HYDRAULIC RADIATOR BALANCING TRAINING UNIT - THBT

THBT

Available

9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING

THBT

Hydraulic Radiator Balancing Training Unit

The Hydraulic Radiator Balancing Training Unit, "THBT", allows the study of the amount of water with which to guarantee that all the radiators of an installation are supplied with sufficient hot water.The hydraulic balancing is carried out by...

THST

Available

9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING

THST

Heating System Training Unit

The Heating System Training Unit, "THST", has been designed to study central heating systems. The unit simulates a central heating system. For that purpose, it is made up of four radiators with a thermostatic valve each. This valve controls the...

TCPT

Available

9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING

TCPT

Circulating Pumps Training Unit

The Circulating Pumps Training Unit, "TCPT", designed by EDIBON, is an advanced tool designed to facilitate the study and understanding of the operation of circulation pumps in heating systems and sanitary techniques. This unit allows...

TEVT

Available

9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING

TEVT

Expansion Vessel Training Unit

The Expansion Vessel Training Unit, "TEVT", is a test unit for sanitary and heating techniques that allows studying the operation of an expansion vessel. It also allows studying the pressure – volume characteristic curve of it. The aim element of...

PRESSURE VESSEL AND SAFETY FEATURES TRAINING UNIT - TPVST

TPVST

Available

9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING

TPVST

Pressure Vessel and Safety Features Training Unit

The Pressure Vessel and Safety Features Training Unit, "TPVST", is an experimentation of sanitary and heating techniques unit that allows studying the safety elements of a heating system with a pressure tank. It consists of a circuit of pipes for...

FOR FURTHER INFORMATION, CONTACT US