AE-PLC-FMS15 Système de Fabrication Flexible 15

6.2.6.- SYSTÈMES DE FABRICATION MODULAIRE AVEC PLC

SYSTEMES INNOVANTS

The Flexible Manufacturing System 15, "AE-PLC-FMS15" is a modular system composed of four workstations: the "AE-PLC-A" Feeding Workstation for Pieces, the "AE-PLC-M" Mounting Workstation, the "AE-PLC-T" Linear Transport Workstation and the "AE-BR" Robotic Arm Workstation.

Voir description générale

Catalogue

Spécifications du Concours

Expansions

ICAI

Logiciel Interactif pour l'Enseignement assisté par Ordinateur

NOUVELLES LIÉES

Description Générale

The objective of the "AE-PLC-FMS15" system is to provide a base piece and mount three different pieces and screws inside it, once the piece is complete, the system stores it in an specific position.

The process of the "AE-PLC-FMS15" is explained in the following lines:

First, the feeding system provides the base pieces with the correct dimensions and place them on the linear transport system.
Then, the mounting workstation provide another piece, and after verify that is correct, mount them inside the base piece placed on the linear transport system.
Finally, the Robotic Arm Workstation pick the sorted pieces and store them.

The "AE-PLC-FMS15" system design by EDIBON allows the users to learn the basic concepts of automation as the operation of an Ethernet network or how to program a PLC and about other areas as pneumatic, electro-pneumatic, vacuum technology, etc.

Des exercices et pratiques guidées

EXERCICES GUIDÉS INCLUS DANS LE MANUEL

Practical possibilities to be done with the Flexible Manufacturing System 15 (AE-PLC-FMS15):

Introduction to flexible manufacturing system (FMS).
Introduction to pneumatics and electro-pneumatics.
Introduction to vacuum technology.
Study of the sensor detection.
Testing the digital inputs and outputs of the automatic system through a PLC.
Modify manufacturing parameters through the PLC.
Configuration of a pneumatic application.
Introduction to the Human-machine interface systems (HMI).
Study of an automatic control of an industrial system.
Control of the flexible manufacturing system through a central PLC in an Ethernet network with local PLC in each workstation.
Manage the flexible manufacturing system through the HMI device.

Practical possibilities to be done with the Workstation alone:

- Feeding Workstation for Pieces (AE-PLC-A).

Manual control of a Feeding system.
Automatic control of a Feeding system.
Change the parameters of the Feeding process.
Optimize the process time.

- Mounting Workstation (AE-PLC-M).

Manual control of a mounting system.
Automatic control of a mounting system.
Change the parameters of the mounting process.
Optimization of the process time.
Study and analysis of the faults inserted in the process with the fault generation module.

- Robotic Arm Workstation (AE-BR).

Introduction to robotic systems.
Robotic arm configuration.
Set a simple movement of the robotic arm.
Configuration of a pneumatic application.
Set a simple pick and place function with the robotic arm.

- Linear Transport Workstation (AE-PLC-T).

Manual control of a transporting system.
Automatic control of a transporting system.
Change the parameters of a transporting process.
Optimize the process time.

PLUS D'EXERCICES PRATIQUES À EFFECTUER AVEC CETTE ÉQUIPEMENT

Several other exercises can be done and designed by the user.

UNITÉS SIMILAIRES DISPONIBLES

FLEXIBLE MANUFACTURING SYSTEM 2 - AE-PLC-FMS2

AE-PLC-FMS2

Available

6.2.6.- SYSTÈMES DE FABRICATION MODULAIRE AVEC PLC

AE-PLC-FMS2

Système de Fabrication Flexible 2

The Flexible Manufacturing System 2, "AE-PLC-FMS2" is a modular system composed of five workstations: the Feeding Workstation for Pieces "AE-PLC-A", the Mounting Workstation "AE-PLC-M", the Rotary Table Workstation 1 "AE-PLC-MR1", the Rotary Table...

FLEXIBLE MANUFACTURING SYSTEM 3 - AE-PLC-FMS3

AE-PLC-FMS3

Available

6.2.6.- SYSTÈMES DE FABRICATION MODULAIRE AVEC PLC

AE-PLC-FMS3

Système de Fabrication Flexible 3

The Flexible Manufacturing System 3, "AE-PLC-FMS3" is a modular system composed of five workstations: the Feeding Workstation for Pieces "AE-PLC-A", the Mounting Workstation "AE-PLC-M", the Rotary Table Workstation 2 "AE-PLC-MR2", the Storage...

FLEXIBLE MANUFACTURING SYSTEM 4 - AE-PLC-FMS4

AE-PLC-FMS4

Available

6.2.6.- SYSTÈMES DE FABRICATION MODULAIRE AVEC PLC

AE-PLC-FMS4

Système de Fabrication Flexible 4

The Flexible Manufacturing System 4, "AE-PLC-FMS4" is a modular system composed of four workstations: the "AE-PLC-FT" filtration workstation, the "AE-PLC-MS" mixing workstation, the "AE-PLC-CP" industrial control processes workstation and the...

FLEXIBLE MANUFACTURING SYSTEM 5 - AE-PLC-FMS5

AE-PLC-FMS5

Available

6.2.6.- SYSTÈMES DE FABRICATION MODULAIRE AVEC PLC

AE-PLC-FMS5

Système de Fabrication Flexible 5

The Flexible Manufacturing System 5, "AE-PLC-FMS5" is a modular system composed of ten workstations: the "AE-PLC-DS" Pieces Distributor Workstation, the "AE-PLC-SIP" Pieces Identification Workstation, the "AE-PLC-CF" Sorting Workstation, two...

FLEXIBLE MANUFACTURING SYSTEM 6 - AE-PLC-FMS6

AE-PLC-FMS6

Available

6.2.6.- SYSTÈMES DE FABRICATION MODULAIRE AVEC PLC

AE-PLC-FMS6

Système de Fabrication Flexible 6

The Flexible Manufacturing System 6, "AE-PLC-FMS6" is a modular system composed of two workstations: the "AE-PLC-A" feeding workstation for pieces and the "AE-PLC-CF" sorting workstation. The objective of the "AE-PLC-FMS6" system is to provide...

FLEXIBLE MANUFACTURING SYSTEM 7 - AE-PLC-FMS7

AE-PLC-FMS7

Available

6.2.6.- SYSTÈMES DE FABRICATION MODULAIRE AVEC PLC

AE-PLC-FMS7

Système de Fabrication Flexible 7

The Flexible Manufacturing System 7, "AE-PLC-FMS7" is a modular system composed of four workstations: the "AE-PLC-A" Feeding Workstation for Pieces, the "AE-PLC-SIP" Pieces Identification Workstation, the "AE-PLC-CF" Sorting Workstation and the...

FLEXIBLE MANUFACTURING SYSTEM 9 - AE-PLC-FMS9

AE-PLC-FMS9

Available

6.2.6.- SYSTÈMES DE FABRICATION MODULAIRE AVEC PLC

AE-PLC-FMS9

Système de Fabrication Flexible 9

The Flexible Manufacturing System 9, "AE-PLC-FMS9" is a modular system composed of four workstations: the "AE-PLC-A" Feeding Workstation for Pieces, the "AE-PLC-CF" Sorting Workstation, the "AE-BR" Robotic Arm Workstation and the "AE-CNCT" CNC...

FLEXIBLE MANUFACTURING SYSTEM 10 - AE-PLC-FMS10

AE-PLC-FMS10

Available

6.2.6.- SYSTÈMES DE FABRICATION MODULAIRE AVEC PLC

AE-PLC-FMS10

Système de Fabrication Flexible 10

The Flexible Manufacturing System 10, "AE-PLC-10" is a modular system composed of four workstations: the "AE-PLC-A" Feeding Workstation for Pieces, the "AE-PLC-CF" Sorting Workstation, the "AE-BR" Robotic Arm Workstation and the "AE-CNCF" CNC...

FLEXIBLE MANUFACTURING SYSTEM 11 - AE-PLC-FMS11

AE-PLC-FMS11

Available

6.2.6.- SYSTÈMES DE FABRICATION MODULAIRE AVEC PLC

AE-PLC-FMS11

Système de Fabrication Flexible 11

The Flexible Manufacturing System 11, "AE-PLC-FMS11" is a modular system composed of eleven workstations: the "AE-PLC-A" Feeding Workstation for Pieces, the "AE-PLC-CF" Sorting Workstation, the "AE-PLC-M" Mounting Workstation, the "AE-PLC-MR3"...

FLEXIBLE MANUFACTURING SYSTEM 12 - AE-PLC-FMS12

AE-PLC-FMS12

Available

6.2.6.- SYSTÈMES DE FABRICATION MODULAIRE AVEC PLC

AE-PLC-FMS12

Système de Fabrication Flexible 12

The Flexible Manufacturing System 12, "AE-PLC-FMS12" is a modular system composed of twelve workstations: the "AE-PLC-A" Feeding Workstation for Pieces, the "AE-PLC-CF" Sorting Workstation, the "AE-PLC-M" Mounting Workstation, the "AE-PLC-MR3"...

FLEXIBLE MANUFACTURING SYSTEM 13 - AE-PLC-FMS13

AE-PLC-FMS13

Available

6.2.6.- SYSTÈMES DE FABRICATION MODULAIRE AVEC PLC

AE-PLC-FMS13

Système de Fabrication Flexible 13

The Flexible Manufacturing System 13, "AE-PLC-FMS13" is a modular system composed of thirteen workstations: the "AE-PLC-A" Feeding Workstation for Pieces, the "AE-PLC-CF" Sorting Workstation, the "AE-PLC-M" Mounting Workstation, the "AE-PLC-MR3"...

FLEXIBLE MANUFACTURING SYSTEM 1 - AE-PLC-FMS1

AE-PLC-FMS1

Available

6.2.6.- SYSTÈMES DE FABRICATION MODULAIRE AVEC PLC

AE-PLC-FMS1

Système de Fabrication Flexible 1

The Flexible Manufacturing System 1, "AE-PLC-FMS1" is a modular system composed of five workstations: the Feeding Workstation for Pieces "AE-PLC-A", the Mounting Workstation "AE-PLC-M", the Automatic Pressing Workstation, "AE-PLC-P", the Rotary...

FLEXIBLE MANUFACTURING SYSTEM 14 - AE-PLC-FMS14

AE-PLC-FMS14

Available

6.2.6.- SYSTÈMES DE FABRICATION MODULAIRE AVEC PLC

AE-PLC-FMS14

Système de Fabrication Flexible 14

The Flexible Manufacturing System 14, "AE-PLC-FMS14" is a modular system composed of three workstations: the Industrial Control Processes Workstation "AE-PLC-CP", the Rotary Table Workstation 4 "AE-PLC-MR4", the Bottling Storage Workstation and...