14.1.- BIOMEKANIKA

Biomekanik mempelajari mekanisme pergerakan makhluk hidup, di antaranya gerakan tubuh manusia. Penelitian ini berkisar dari gerakan yang paling sederhana dalam kehidupan sehari-hari, seperti Kerja atau olah raga, hingga pergerakan beberapa organ dalam, seperti jantung. Untuk mempelajari kinetika tubuh manusia, biomekanik menerapkan prinsip mekanika dan pengetahuan tentang anatomi dan fisiologi, yang memungkinkan rancangan instrumen diagnostik dan perawatan baru serta pengembangan implan dan yang lebih baik prostesis desain.

Lihat Lebih Banyak

Saat ini, Biomekanik menganalisis gerakan kombinasi sendi dan otot. Analisis ini memungkinkan kita untuk mempelajari beban dan upaya yang dilakukan tubuh manusia. Pengetahuan tentang kinetika manusia memungkinkan perawatan cedera dan rehabilitasi selanjutnya, desain prostesis yang memungkinkan fleksibilitas gerakan, pencarian teknik olahraga baru untuk meningkatkan kinerja aktivitas fisik atau pencegahan kerusakan organisme saat melakukan aktivitas di tempat kerja dan di rumah. Pengetahuan ini dapat dibagi menjadi beberapa bidang Biomekanik: Biomekanik Medis, Biomekanik Olahraga dan Biomekanik Kerja. Aplikasi lain dari Biomekanik adalah desain aplikasi robotik. Gerakan yang dilakukan oleh lengan robot atau kapasitas perpindahan beberapa orang melalui sistem lokomotor elektro-mekanis didasarkan pada mekanisme makhluk hidup.

Studi berkelanjutan tentang perilaku mekanis organisme mengarahkan aplikasi biomekanik untuk mengembangkan prostesis bionik dan organisme buatan yang mensimulasikan fungsi normal organisme nyata dan dapat bereaksi terhadap rangsangan. Selain itu, peningkatan teknologi exoskeletons akan meningkatkan mobilitas orang-orang dengan mobilitas terbatas dan meningkatkan kapasitas fisik saat melakukan aktivitas yang berat.

Lihat Produk

BIOMEKANIKA PERALATAN

Menampilkan 1 -30 dari 109 produk

BASIC MECHANICS INTEGRATED LABORATORY - LIMEBA

LIMEBA

Available

7.1.1.- MECHANICS FUNDAMENTALS KITS

LIMEBA

Basic Mechanics Integrated Laboratory

The Integrated Basic Mechanics Laboratory, "LIMEBA," designed by EDIBON, allows for the construction of various experiments on the base panel, where length measurements are possible thanks to the distance between the centers of the perforations...

PANEL AND COMMON ELEMENTS CASE FOR LIMEBA - MECA/EC

Aksesori dari LIMEBA

Available

7.1.1.- MECHANICS FUNDAMENTALS KITS

MECA/EC

Panel dan Koper dengan Elemen Umum untuk LIMEBA

Aksesori dari LIMEBA

It is the supporting structure where the modules’s elements are mounted in order to undertake the experiments and hence, the basepanel is necessary along with any module.The panel is pierced with equidistant holes that help students to take...

Aksesori dari LIMEBA

Available

7.1.1.- MECHANICS FUNDAMENTALS KITS

MECA1

Statics Experiments

Aksesori dari LIMEBA

Statics is the part of Mechanics that studies any kind of structure or element in balance-equilibrium.Basically the module consist on experiments in which the student shall learn to deduce the main principles of Statics and its most important...

LOAD ELEVATION MECHANISMS EXPERIMENTS - MECA2

Aksesori dari LIMEBA

Available

7.1.1.- MECHANICS FUNDAMENTALS KITS

MECA2

Load Elevation Mechanisms Experiments

Aksesori dari LIMEBA

Experimentation with the most important load lifting mechanisms.Study of the work and performance of different mechanisms.

Aksesori dari LIMEBA

Available

7.1.1.- MECHANICS FUNDAMENTALS KITS

MECA3

Transmissions Experiments

Aksesori dari LIMEBA

Most recent machines require the transmission of motion between elements to obtain the desired mechanical result. The mechanisms studied in this module are those that transmit motion between two axles.

Aksesori dari LIMEBA

Available

7.1.1.- MECHANICS FUNDAMENTALS KITS

MECA4

Dynamics Experiments

Aksesori dari LIMEBA

Dynamics is the part of Mechanics that analyzes the motion of an element or mechanism caused by a force. Thus the study is concentrated on the basic laws of Dynamics.

Aksesori dari LIMEBA

Available

7.1.1.- MECHANICS FUNDAMENTALS KITS

MECA5

Friction Experiments

Aksesori dari LIMEBA

This module considers the most important phenomenon of Dynamics: Friction. It is a manifestation of the energy loss due to contact, effect that happens in every real-world mechanism.

Aksesori dari LIMEBA

Available

7.1.1.- MECHANICS FUNDAMENTALS KITS

MECA6

Special Mechanisms Experiments

Aksesori dari LIMEBA

This module considers various mechanisms frequently used in industrial processes, without them some operations would not be possible with the same efficiency. Here these mechanisms are shown and their function analyzed.

Available

7.1.2.1.- MEKANISME

MBD

Slider Crank Mechanism

The Slider Crank Mechanism, "MBD", designed by EDIBON, is an example of slider-crank mechanism.This mechanism is made of aluminum and consists of a rotary element (graduated disc), called crank, connected to a rigid bar, calledconnecting rod. When...

Available

7.1.2.1.- MEKANISME

MYE

Scotch Yoke Mechanism

The Scotch Yoke Mechanism, "MYE", designed by EDIBON, is an example of slider-crank mechanism for converting the linear motion of a slider into rotational motion or vice versa.It is made of aluminum and consists of a rotary element, called crank,...

MBM1

Available

7.1.2.1.- MEKANISME

MBM1

Slotted Link Mechanism

The Slotted Link Mechanism, "MBM1", is an example of a quick-return mechanism, capable of transforming circular motion into reciprocating motion. It is made of aluminum and consists of a rotary element (graduated disk), called crank, connected to...

MBM2

Available

7.1.2.1.- MEKANISME

MBM2

Whitworth Quick Return Mechanism

The Whitworth Quick Return Mechanism, "MBM2", is a mechanism able to transform circular movement into reciprocating movement. It ismade of aluminum and consists of a rotary element, called crank, with a graduated disk, connected to a rigid bar,...

Available

7.1.2.1.- MEKANISME

MCA

Four-Bar Mechanism

The Four-Bar Mechanism, "MCA", designed by EDIBON, is a bench-top unit to perform laboratory experiments.It is made of anodized aluminum and consists of two rotary elements (graduated discs) mounted on ball bearings. The discs include a scale to...

Available

7.1.2.1.- MEKANISME

MME

Geneva Stop Mechanism

The Geneva Stop Mechanism, "MME", designed by EDIBON, is a mechanism that transforms continuous circular motion into intermittent motion. It is a positive drive in which the driven wheel is positively moved or locked.It is made of aluminum and...

Available

7.1.2.1.- MEKANISME

MAC

Coupling Mechanism

The Coupling Mechanism, "MAC", represents a simple Oldham type coupling. The lateral displacement of the input and output shafts may be varied and circular scales are fitted to the input and output flanges.It consists of two outer discs made of...

Available

7.1.2.1.- MEKANISME

MUN

Hooke's Joint Mechanism

The Hooke’s Joint Mechanism, "MUN", designed by EDIBON, represents a universal coupling, also called a U-joint, Hooke joint or cardan joint. The Hooke joint is a universal mechanism that is often used to transmit rotary motion between two...

Available

7.1.2.1.- MEKANISME

MEX

Cam and Follower Mechanism

The Cam and Follower Mechanism, "MEX", allows to study the cam-follower and eccentric-follower mechanisms. For that purpose, several plate cam models in different forms, one eccentric and several roller-shaped, flat-shaped, wedge-shaped and...

Available

7.1.2.1.- MEKANISME

MBI

Crank Mechanism

The Crank Mechanism "MBI", is a unit designed to observe, study and record the motion of a crank and the forces involved in a simple engine mechanism. The piston is linearly displaced through a cylinder with the aid of a guide.Bearings are coupled...

Available

7.1.2.1.- MEKANISME

MDA

Ackermann Steering Mechanism

The Ackermann Steering Mechanism, "MDA", is a bench-mounted unit designed to determine the lead angle of a steering trapezoid in an Ackermann steering mechanism, the disadvantages of incorrectly adjusted track rods and the influence of the track...

MMEL

Available

7.1.2.1.- MEKANISME

MMEL

Winch Mechanism

The Winch Mechanism, "MMEL", allows to study the lifting velocity and load transmission of a winch. Efficiency and load transmission can be determined by force balance.The unit consists of a gear transmission mechanism. One gear is the input gear...

MBLU

Available

7.1.2.1.- MEKANISME

MBLU

Bar Linkages Unit

The Bar Linkages Unit "MBLU" allows many experiments using different arrangements of their parts.The "MBLU" unit includes a selection of more than twenty perforated bars of different lengths and pivots or "joints" to allow students to configure...

MTSF

Available

14.1.2.2.- RODA GIGI

MTSF

Worm and Wheel Unit

The Worm and Wheel Unit, "MTSF", allows to demonstrate the principle of a worm gear.The unit consists in a worm and a wheel. These parts are mounted on ball bearings and fixed to a vertical panel.The worm and wheel are positioned a set distance...

ACCELERATION OF GEARED SYSTEM UNIT - MAE

Available

14.1.2.2.- RODA GIGI

MAE

Acceleration of Geared System Unit

The Acceleration of Geared Systems Unit, "MAE", designed by EDIBON, allows to perform tests to calculate the moment of inertia of a gear train system.The MAE unit includes six gears. Two of them can have another position in the shafts to vary the...

MSDA

Available

14.1.2.2.- RODA GIGI

MSDA

Perangkat Pemasangan Transmisi Sederhana

The Simple Drives Assembly Unit, "MSDA", allows the knowledge and learning of the fundamentals of the mechanical transmission technique, as well as the assembly, disassembly and experimentation with simple gears.The unit allows to carry out...

MCDA

Available

14.1.2.2.- RODA GIGI

MCDA

Perangkat Pemasangan Transmisi Gabungan

The Combined Drives Assembly Unit, "MCDA", allows carrying out advanced exercises and provides an understanding of the significant components and arrangements of the mechanical drive technology.With this unit, practices can be carried out to...

MGTA

Available

14.1.2.2.- RODA GIGI

MGTA

Perangkat Pemasangan Gigi Ganda

The Unit to Study Gear Train Assembly, "MGTA", allows to perform diverse assemblies of gearboxes. The student will essentially learn the practice of assembling gear components in transmissions and will be introduced to the technique of mechanical...

Available

14.1.2.2.- RODA GIGI

MGE

Gear Generation Unit

The Gear Generation Unit, "MGE", has been designed by EDIBON to study rack and pinion systems. With this unit the student can draw by an easy procedure the profile of a tooth, produced by the involute process of the rack when passing over the...

MESE-T

Available

7.1.2.2.- RODA GIGI

MESE-T

Geared Study

The Geared Study Drive Unit, "MESE", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission.For the...

Available

14.1.2.2.- RODA GIGI

MEE

Geared Lifting Unit

The Geared Lifting Unit, "MEE", has been designed to study a simple lifting mechanism and its use to determine the speed ratio, its mechanical advantages and efficiency.The unit is mounted on a metal structure with bearings that support the gear...

UNIT FOR THE KINEMATIC STUDY OF GEAR TRAINS - KSGT

KSGT

Available

7.1.2.2.- RODA GIGI

KSGT

Unit for the Kinematic Study of Gear Trains

The Unit for the Kinematic Study of Gear Trains, "KSGT", unit includes a pivoting rail with a fixed axle to which two more axles can be fixed in any position in function of the feature to study.The cogwheels may be assembled on the axles in...

UNTUK INFORMASI LEBIH LANJUT, HUBUNGI KAMI