- Beranda
- Produk
- 1.- FISIKA
- PROGRAM AKADEMIK
- PENDIDIKAN TEKNIS TINGGI
- TEKNIK MAKANAN
- TEKNIK TOPOGRAFI
- GEOLOGI
- TEKNIK HUTAN
- TEKNIK LINGKUNGAN
- TEKNIK EKOLOGI
- TEKNIK TEKSTIL
- TEKNIK UNTUK INDUSTRI PERTANIAN
- TEKNIK MESIN
- KIMIA
- TEKNIK KIMIA
- TEKNIK PROSES
- TEKNIK GEOLOGI, PERTAMBANGAN DAN MINYAK
- PUSAT PELATIHAN PETROLEUM
- TEKNIK NAVAL
- TEKNIK PERTANIAN
- TEKNIK ELEKTRONIK
- ARSITEKTUR
- ILMU KOMPUTER DAN TEKNIK
- TEKNIK NUKLIR
- TEKNIK OTOMATIS
- TEKNIK ENERGETIK
- PUSAT PELATIHAN ENERGI
- TEKNIK LISTRIK
- TEKNIK SISTEM
- TEKNIK PENERBANGAN
- TEKNIK LAUT DAN ILMU LAUT
- FISIKA
- TEKNIK INDUSTRI
- PUSAT INTERNASIONAL UNTUK PELATIHAN TEKNIS, PENGEMBANGAN DAN PENELITIAN
- TEKNIK BAHAN
- TEKNIK LOGAM
- TEKNIK SIPIL
- TEKNIK TELEKOMUNIKASI
- TEKNIK TERMAL
- SEKOLAH TEKNIS
- ELEKTRONIK
- KOMUNIKASI
- LISTRIK
- ILMU KOMPUTER DAN TEKNIK
- TEKNOLOGI OTOMOTIF
- TEKNIK SIPIL
- MEKANIK DAN INDUSTRI
- MEKANIK DAN LOGAM
- MEKANIKA CAIRAN
- REFRIGERASI DAN AC
- KIMIA INDUSTRI
- KIMIA
- TEKNOLOGI MAKANAN
- PERTANIAN
- AGROINDUSTRI
- PEMELIHARAAN
- MARITIM DAN PERIKANAN
- PERAWATAN PENERBANGAN
- INSTRUMENTASI DAN KONTROL
- LINGKUNGAN
- TEKNOLOGI
- TEKNOLOGI KONSTRUKSI
- TEKNOLOGI ELEKTROMEKANIK
- TEKNOLOGI DESAIN STRUKTURAL
- TEKNOLOGI PRODUKSI INDUSTRI
- TEKNOLOGI INFORMASI
- PENGENDALIAN KUALITAS
- TEKNOLOGI SISTEM ENERGI
- TEKNOLOGI PERTAMBANGAN DAN MINYAK BUMI
- TEKNOLOGI GAS ALAM
- ENERGI TERBARUKAN
- TEKNOLOGI TELEKOMUNIKASI
- TEKNOLOGI MEKANIK
- TEKNOLOGI ANGIN
- TEKNOLOGI NUKLIR
- TEKNOLOGI KONTROL PROSES
- TEKNOLOGI LAYANAN UMUM
- TEKNOLOGI LABORATORIUM
- OTOMATISASI DAN MEKATRONIKA
- TRANSPORTASI DAN LOGISTIK
- PENDIDIKAN TEKNIS TINGGI
- 2.- ELEKTRONIKA
- 3.- KOMUNIKASI
- 4.- LISTRIK
- 5.- ENERGI
- 5.1.- GRID CERDAS DAN SISTEM DAYA
- 5.2.- MIKROGRID
- 5.3.- ENERGI TERBARUKAN
- 5.3.1.- ENERGI SURYA FOTOVOLTAIK
- 5.3.2.- ENERGI TERMAL SURYA
- 5.3.3.- ENERGI ANGIN
- 5.3.4.- ENERGI LAUT
- 5.3.5.- ENERGI GEOTHERMAL
- 5.3.6.- ENERGI HIDROLIK
- 5.3.7.- BIOFUEL
- 5.3.8.- SISTEM AKUMULASI ENERGI
- 5.3.9.- SEL BAHAN BAKAR HYDROGEN
- 5.3.10.- TURBIN STEAM DAN SIKLUS RANKINE ORGANIK
- 5.3.11.- SISTEM NON-KONVENSIONAL LAINNYA
- 5.4.- ENERGI KONVENSIONAL
- 5.5.- PENYIMPANAN ENERGI
- 5.6.- TEGANGAN TINGGI DAN SISTEM PERLINDUNGAN LISTRIK
- 5.7.- PEMASANGAN DAN PEMELIHARAAN
- 6.- MEKATRONIK & OTOMASI
- 7.- MEKANIKA
- 8.- MEKANIKA FLUIDA
- 9.- TERMODINAMIK DAN TERMOTEKNIK
- 10.- PENGENDALIAN PROSES
- 11.- TEKNIK KIMIA
- 11.1.- OPERASI UNIT
- 11.1.1.- FLUIDIZATION
- 11.1.2.- PENGUAPAN
- 11.1.3.- MENDIDIH
- 11.1.4.- DISTILASI DAN RETAK
- 11.1.5.- EKSTRAKSI
- 11.1.6.- DIFUSI
- 11.1.7.- PENGERINGAN DAN PENDINGINAN
- 11.1.8.- PENYERAPAN DAN ADSORPSI
- 11.1.9.- PERTUKARAN ION DAN KOROSI
- 11.1.10.- KRISTALISASI DAN PIROLISIS
- 11.1.11.- FILTRASI, SEDIMENTASI, DAN PENCAMPURAN
- 11.1.12.- PENGOBATAN SOLIDS
- 11.2.- REAKTOR KIMIA
- 11.1.- OPERASI UNIT
- 12.- TEKNOLOGI PANGAN & AIR
- 13.- LINGKUNGAN HIDUP
- 14.- TEKNIK BIOMEDIS
- AKSESORIS LABORATORIUM
- PABRIK PILOT SESUAI PESANAN
- MODUL
- EKSPANSI
- LABORATORIUM
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- 411
- Garis Bisnis
- Teknologi
- Unduh
- Tentang kami
- Berita
- KONTAK
Setting up at Faculté des Sciences at the Université d’Etat d’Haiti
We want to present our new installation in the Faculté des Sciences at the Université d’Etat d’Haiti, specifically in the Fluid Mechanics Department. There, we have installed many of our equipment, among which are: AFT, CF80/5 (with CFAS, CFFS, CFPLR, CFPR, CFRM, CFSDL, CFTP, CFTS, CFVD, CFVEN, CFVG accessories), ESED, ESH(2x1m), FME00, FME02, FME12, FME13, FME16, FME18, FME28, FME29, PDFD, PPTAC/1 and SPFB. We are very happy to continue working on projects like this and we hope that students can improve their practical training thanks to these new units. It was a pleasure!
Produk-produk Terkait
8.1.1.- UNIT DASAR
FME00
The Hydraulics Bench, "FME00", designed by EDIBON, allows the study of fluid behaviour, hydraulic theory and the properties of fluid mechanics.It is formed by a movable hydraulics bench used to hold a wide variety of modules, which allow the...
8.1.6.- MESIN HIDROLIK: POMPA
FME12
Pompa Seri/Paralel
The Series/Parallel Pumps unit, "FME12", designed by EDIBON, allows the study of the coupling between two series/parallel centrifugal pumps, obtaining the characteristic curves as well as the calculation of the water flow rate.The unit consists of...
8.5.- SALURAN HIDROLIK
CF
Saluran Fluida (bagian: 80X300 mm)
Channel, through which water flows, of rectangular section with transparent walls that enable to observe all the experiments. Water is taken from the storage tank by means of a hydraulic pump and, by the pipe, it is driven to the inlet tank, where...
8.1.6.- MESIN HIDROLIK: POMPA
FME13
Karakteristik Pompa Sentrifugal
The Centrifugal Pump Characteristics, "FME13", designed by EDIBON, allows the study of several centrifugal pump characteristics such as efficiency, series/parallel couplings, etc.The unit has a centrifugal pump with similar characteristics to the...
8.1.2.- PENGUKURAN
FME18
Demonstrasi Flowmeter
The Flow Meter Demonstration, "FME18", designed by EDIBON, allows through 3 different flow measurement accessories: Venturi tube, orifice plate and a variable area meter installed in series in the unit, the study to find the flow rate of the fluid...
11.1.11.- FILTRASI, SEDIMENTASI, DAN PENCAMPURAN
ESED
Peralatan Studi Sedimentasi
The Sedimentation Study Unit, "ESED", designed by EDIBON, allows studying and compare the sedimentation processes of several suspensions simultaneously.It is formed by five sedimentation methacrylate cylinders mounted vertically on a panel,...
8.8.- SISTEM PIPA FLUIDA
AFT
Peralatan Gesekan dalam Pipa, dengan Bangku Hidrolik (FME00)
The Fluid Friction in Pipes Unit, with Hydraulics Bench (FME00), "AFT", is designed to determine the friction coefficient in pipes of several diameters and roughness, to study the pressure losses in different types of valves and different fittings...
13.1.- HIDROLOGI DAN HIDROGEOLOGI
ESH(2x1m)
Peralatan Sistem Hidrologi, Simulator Hujan dan Sistem Irigasi (2x1 m)
The Hydrological Systems, Rainfall Simulator and Irrigation Systems (2x1 m), "ESH(2x1m)", has been designed by EDIBON to demonstrate some of the physical processes encountered in hydrology and fluvial geomorphology. This includes rainfall...
8.1.2.- PENGUKURAN
FME02
Aliran Berlebih Weirs
The Flow over Weirs, "FME02", designed by EDIBON, has many elements that are used in combination with the Hydraulics Bench (FME00): A special mouthpiece is coupled to the outlet mouthpiece for water in the Hydraulics Bench (FME00).Two soothing...
8.1.7.- MESIN HIDROLIK: TURBIN
FME29
Turbin Kaplan
With the Kaplan Turbine unit, "FME29", designed by EDIBON, we study the Kaplan turbines commonly used when we have high flow rates but low flow height.This unit consists on a miniature Kaplan turbine. The water inlet flow is controlled by a valve...
8.1.7.- MESIN HIDROLIK: TURBIN
FME16
Turbin Pelton
The Pelton Turbine unit, "FME16", designed by EDIBON, allows the study of the characteristics of the tangential wheels or pressure turbines commonly used to produce electricity in hydroelectric plants to exploit large hydraulic jumps of low...
13.3.- PENGOLAHAN AIR LIMBAH
SPFB
Peralatan Flokulasi, Presipitasi, dan Sedimentasi
The Sedimentation, Precipitation and Flocculation Unit, "SPFB", has been designed by EDIBON to study the parameters that affect the physicochemical treatment of wastewater for purification. The objective of the unit is to reduce colloidal and...