2.3.- TEORITIS - DASAR PRAKTIS

Fase pengembangan elektronik perangkat adalah sekumpulan tahapan yang dilakukan untuk mendapatkan produk yang memenuhi spesifikasi yang diperlukan.

Lihat Lebih Banyak

Tahapan paling khas dari setiap pengembangan perangkat elektronik adalah: menentukan spesifikasi peralatan, merancang sirkuit elektronik yang berbeda yang akan dibutuhkan perangkat (sirkuit catu daya, sirkuit kontrol, sirkuit daya, sirkuit pemfilter sinyal, sirkuit osilator, sirkuit isolasi antara sirkuit daya dan sirkuit sinyal, sirkuit pengkondisian sinyal analog, sirkuit amplifier, sirkuit coder atau decoder, dll.), menghitung karakteristik dari komponen setiap sirkuit, simulasi pengoperasian sirkuit elektronik peralatan, pengujian sirkuit yang berbeda satu per satu, mengembangkan prototipe produk dan, terakhir, membuat produk akhir.

Tahapan pengembangan pengujian dan pembuatan prototipe dari sirkuit elektronik adalah salah satu langkah kunci dalam desain atau desain ulang elektronik sirkuit.

Dulu, pengujian ini dilakukan dengan merakit dan menyolder komponen pada PCB kosong, tetapi berkat standarisasi komponen, bersamaan dengan munculnya prototipe papan tempat memotong roti atau papan protoboard sirkuit dapat dibuat tanpa penyolderan, yang sangat memudahkan konstruksi sirkuit yang akan diuji.

Lihat Produk

TEORITIS - DASAR PRAKTIS PERALATAN

Menampilkan 1 -30 dari 31 produk

BASIC ELECTRONICS AND ELECTRICITY LABORATORY: - LIEBA

LIEBA

Available

14.2.1.6.- DAYA ELEKTRONIK

LIEBA

Elektronika Dasar dan Laboratorium Kelistrikan Terintegrasi:

We present a flexible and modular-based system for learning basic electronics, basic electricity and circuit theory. The advantage given by this learning and teaching system is that the student establishes his own rhythm, thus rendering...

DIRECT CURRENT (DC) CIRCUITS MODULE - N-M1

N-M1

Available

14.2.1.1.- KONSEP HUKUM LISTRIK DASAR

N-M1

Direct Current (DC) Circuits Module

For the correct understanding of electronics it is necessary to know some fundamental laws and theorems such as Ohm’s Law, Kirchhoff’s Laws and other simple theorems of initiation to D.C. circuits.With Direct Current (D.C.) Circuits Module,...

ALTERNATING CURRENT (AC) CIRCUITS MODULE - N-M2

N-M2

Available

14.2.1.1.- KONSEP HUKUM LISTRIK DASAR

N-M2

Alternating Current (AC) Circuits Module

In contrast to DC, which always has the same direction and sense, in AC the flow of electrons changes direction periodically with a frequency of 50 or 60 Hz (depending on the country).With Alternating Current (AC) Circuits Module, "N-M2", designed...

N-M16

Available

14.2.1.1.- KONSEP HUKUM LISTRIK DASAR

N-M16

Electric Networks Module

After studying the basic knowledge of electrical networks, we must understand and investigate the dependence between current and voltage applied to different electrical devices.With the Electric Networks Module, "N-M16", designed by EDIBON, it is...

N-M17

Available

14.2.1.1.- KONSEP HUKUM LISTRIK DASAR

N-M17

Electromagnetism Module

Electromagnetism is the interaction between electric charges. It is described in terms of charges interacting between of electric and magnetic fields.With the Electromagnetism Module, "N-M17", designed by EDIBON, the operation of electromagnetic...

N-M18

Available

14.2.1.1.- KONSEP HUKUM LISTRIK DASAR

N-M18

Three-phase Circuits Module

Three-phase voltage is essentially a system of three alternating voltages, coupled (all 3 are produced simultaneously in a generator) and 120º out of phase with each other (i.e. one third of the period).The Three-phase Circuits Module, "N-M18",...

N-M6

Available

14.2.1.2.- ELEKTRONIK ANALOG

N-M6

Oscillators Module

Oscillators operation is usually very similar in all of them: the oscillating circuit produces an oscillation, then the amplifier increases it and finally the feedback network takes a part of the energy from the oscillating circuit and introduces...

N-M7

Available

14.2.1.2.- ELEKTRONIK ANALOG

N-M7

Operational Amplifiers Module

Operational amplifiers are compact, active, linear and high-gain devices designed to provide the desired transfer function. An operational amplifier consists of an electronic circuit having two inputs and one output. The output is the difference...

ANALOG/DIGITAL CONVERTERS MODULE - N-M60

N-M60

Available

2.3.3.- ELEKTRONIK DIGITAL

N-M60

Analog/Digital Converters Module

Most of the "information" generated in the world by various physical phenomena has a strong analogical character. This means that the information undergoes a continuous variation within certain limits determined over time. Of course, there is also...

N-M8

Available

14.2.1.2.- ELEKTRONIK ANALOG

N-M8

Filters Module

An electronic filter is an element that allows electrical signals to pass through it, at a specific frequency or frequency ranges while preventing the passage of others, being able to modify both, their amplitude and phase. It is a device that...

DIGITAL/ANALOG CONVERTERS MODULE - N-M61

N-M61

Available

2.3.3.- ELEKTRONIK DIGITAL

N-M61

Digital/Analog Converters Module

Digital/analog conversion happens when you want to recover or re-obtain a digital signal that has been processed and we want to regenerate it. A signal that has been sampled, for example, a temperature signal and we need to return it to the...

DIGITAL SYSTEMS & CONVERTERS MODULE - N-M10

N-M10

Available

14.2.1.3.- ELEKTRONIK DIGITAL

N-M10

Digital Systems & Converters Module

Generally, an analog to digital converter is an electronic device that converts an analog voltage input to a digital number.digital number. The digital output can use different coding schemes, such as binary, although some non-electrical or...

DIGITAL ELECTRONICS FUNDAMENTALS MODULE - N-M11

N-M11

Available

14.2.1.3.- ELEKTRONIK DIGITAL

N-M11

Digital Electronics Fundamentals Module

Digital systems are systems for processing, treatment or transmission of information, in which such information is limited to take values in a discrete set. These signals (whose magnitude can only take one value from a discrete set of values) are...

BASIC COMBINATIONAL CIRCUITS MODULE - N-M12

N-M12

Available

14.2.1.3.- ELEKTRONIK DIGITAL

N-M12

Basic Combinational Circuits Module

A combinational circuit is an electronic circuit in which the value of its outputs at a given instant, depends on the value of the inputs at the same instant. In other words, it is a circuit that has no memory. Combinational circuits work with...

BASIC SEQUENTIAL CIRCUITS MODULE - N-M13

N-M13

Available

14.2.1.3.- ELEKTRONIK DIGITAL

N-M13

Basic Sequential Circuits Module

Logic gates and the circuits created with them constitute combinational logic, so called because the output only depends on the combination of the input variables present.There is a second group of logic circuits called sequential logic, so called...

N-M3

Available

14.2.1.4.- SEMIKONDUKTOR

N-M3

Semiconductors I Module

Semiconductors are materials characterized by a resistivity lower than an insulator and higher than a conductor. There are different types of semiconductors, among which we could highlight diodes as extrinsic semiconductors (formed by more than...

N-M4

Available

14.2.1.4.- SEMIKONDUKTOR

N-M4

Semiconductors II Module

To improve and extend the characteristics of the input signals, it is possible to use two or more transistors. Thus, you may want to build an amplifier in which you want to increase the input impedance without decreasing the gain. The solution to...

N-M14

Available

14.2.1.4.- SEMIKONDUKTOR

N-M14

Optoelectronics Module

Optoelectronics is the link between optical systems and electronic systems. Optoelectronic components are those whose operation is directly related to light.They are semiconductor devices capable of producing light radiation within the human...

ELECTRONICS FOR MOTORS AND GENERATORS UNIT - M99-6

M99-6

Available

2.3.1.- KONSEP HUKUM LISTRIK DASAR

M99-6

Unit Motor, Generator dan Kontrol

The Electronics for Motors and Generators Unit, "M99-6", designed by EDIBON, enables to carry out different practices related with motors and generators. The unit has different different types of motors: DC motor, AC motor and stepper motor.The...

Available

2.3.2.- ELEKTRONIK ANALOG

M99

Unit Pengembangan

The Analog Circuits Unit, "M99", designed by EDIBON, allows to do different practices related to basic electronics. The unit has different parts: analog multiplexer, analog multiplier, function generator, AM modulator and AM demodulator.The "M99"...

Available

2.3.5.- INSTRUMENTASI & KONTROL

M41

Tranduser Resistor

This unit allows different practices related to resistance transducers to be carried out. The unit has five different types of transducers: PTC, NTC, LDR, strain gauge and RTD.The operation of thermistors is based on the principle that the...

Available

14.2.1.5.- INSTRUMENTASI & KONTROL

M44

Aplikasi Lampu

This unit allows different practices related to the measurement of light intensity to be carried out. Photodiodes are semiconductor light sensors that generate a current or voltage when the P-N junction in the semiconductor is illuminated with...

Available

14.2.1.5.- INSTRUMENTASI & KONTROL

M45

Posisi Linier dan Kekuatan

Linear Variable Displacement Transducers (LVDT) provide a certain amount of voltage output relative to the parameters being measured, for example force, for signal conditioning.With Linear Position and Force Unit, "M45", designed by EDIBON, it is...

Available

14.2.1.5.- INSTRUMENTASI & KONTROL

M46

Pengukur Lingkungan

Environmental measurement is a data collection process. In other words, it is a continuous and systematic follow-up study of environmental variables (air quality and speed, humidity, pressure, etc.). The aim is to identify and evaluate...

ROTATIONAL SPEED & POSITION CONTROL - M47

Available

14.2.1.5.- INSTRUMENTASI & KONTROL

M47

Kontrol Kecepatan Putar & Posisi

The unit is equipped with a DC motor whose rotation speed can be controlled by the supply voltage. The following sensors are arranged along the motor shaft: optical slot sensor, inductive sensor, infrared reflection sensor, Hall effect sensor,...

Available

14.2.1.5.- INSTRUMENTASI & KONTROL

M48

Pengukur Suara

With the Sound Measurement Unit, "M48", designed by EDIBON, different practices related to sound measurements can be carried out. The unit has three different types of components: two types of microphones and a loudspeaker.

APPLICATIONS OF TEMPERATURE AND PRESSURE MODULE - N-M49

N-M49

Available

2.3.5.- INSTRUMENTASI & KONTROL

N-M49

Applications of Temperature and Pressure Module

A transducer is a device that is capable of transforming or converting a certain type of input energy into a different one at the output. Depending on the application they have, the name itself will indicate the type of conversion it performs, for...

N-M9

Available

14.2.1.6.- DAYA ELEKTRONIK

N-M9

Power Electronics Module

Semiconductors used in power electronics operate as switches and therefore it is interesting to know the conduction characteristics, switching and control methods.With Power Electronics Module, "N-M9", designed by EDIBON, the operation of MOSFET...

N-M5

Available

14.2.1.6.- DAYA ELEKTRONIK

N-M5

Power Supplies Module

With the Power Supplies Module "N-M5", designed by EDIBON, symmetrical voltage regulators, operation of fixed, symmetrical and switched-mode power supplies as well as rectification (conversion of an AC voltage to a DC voltage) can be studied.In...

COMPUTER CONTROLLED A/D AND D/A CONVERTERS UNIT - CADDA

CADDA

Available

14.2.1.3.- ELEKTRONIK DIGITAL

CADDA

Unit Konverter A / D dan D / A yang Dikendalikan Komputer

The Computer Controlled A/D and D/A Converters Unit, "CADDA", unit has been designed to help the students to learn how to perform the most common procedures and study the different circuits used to convert analog signals in a digital signals and...

UNTUK INFORMASI LEBIH LANJUT, HUBUNGI KAMI