MODUL LAYANAN

Layanan tambahan di laboratorium atau industri didefinisikan sebagai pasokan yang diperlukan untuk berfungsinya peralatan dengan baik. Layanan tambahan yang paling umum meliputi: pasokan panas dan dingin, energi listrik, air proses dan pendingin, uap, dan udara terkompresi.

Lihat Lebih Banyak

Masing-masing layanan ini menjadi penting tergantung pada aktivitas yang akan dilakukan, misalnya, suplai listrik untuk menggerakkan motor atau mengaktifkan resistor, suplai panas atau dingin untuk mengontrol suhu, atau udara terkompresi untuk mengontrol katup pneumatik.

Panas proses yang dibutuhkan dapat disuplai melalui uap atau cairan perpindahan panas (air atau minyak) dan dihasilkan oleh peralatan listrik (resistor) atau ketel yang membakar bahan bakar. Dingin dihasilkan melalui siklus pendinginan dengan memanfaatkan panas yang diserap dalam proses penguapan refrigeran. Dan udara terkompresi dapat diperoleh dari tabung yang menyimpan gas bertekanan sangat tinggi atau dengan menggunakan kompresor.

Sektor ilmiah dari peralatan laboratorium tidak mungkin ada tanpa layanan tambahan ini yang diperlukan untuk melaksanakan aktivitas laboratorium dengan baik.

Lihat Produk

MODUL LAYANAN PERALATAN

1.- FISIKA 2.- ELEKTRONIKA 3.- KOMUNIKASI 4.- LISTRIK 5.- ENERGI 6.- MEKATRONIK & OTOMASI 7.- MEKANIKA 8.- MEKANIKA FLUIDA 9.- TERMODINAMIK DAN TERMOTEKNIK 10.- PENGENDALIAN PROSES 11.- TEKNIK KIMIA 12.- TEKNOLOGI PANGAN & AIR 13.- LINGKUNGAN HIDUP 14.- TEKNIK BIOMEDIS AKSESORIS LABORATORIUM PABRIK PILOT SESUAI PESANAN
MODUL LAYANAN FURNITUR TEKNIS INSTRUMENTASI DAN PENGUKURAN PENYELESAIAN MULTIMEDIA
GENERATOR UAP PENYEDIAAN AIR PANAS / DINGIN PEMELIHARAAN REFRIGERASI DAN PERALATAN AC KELOMPOK TEKANAN UNTUK CAIRAN TRANSFORMATOR BANTU DAN PERLINDUNGAN
Menampilkan 1 -16 dari 16 produk
12 24 36
STEAM GENERATOR (3 KW) - TGV
  • TGV
Available
MODUL LAYANAN

TGV

Generator Uap (3 kW)

It is an electrically heated steam generator (3 kW electric resistance). The resistor has an internal thermostat at 150ºC.This type of generator produces steam for an operating pressure of 0.9 bar, with a maximum pressure of 2 bar.The maximum...
Lihat Unit
STEAM GENERATOR (6 KW) - TGV/6KW
  • TGV/6KW
Available
MODUL LAYANAN

TGV/6KW

Generator Uap (6 kW)

A steam generator is an assembly or system formed by its boiler and its accessories, designed to transform a liquid into steam, at temperature and pressure different from that of the atmosphere. Its function is to produce steam to be used in...
Lihat Unit
STEAM GENERATOR (6 KW) (FOR HIGH PRESSURES AND HIGH TEMPERATURES) - TGV-6KWA
  • TGV-6KWA
Available
MODUL LAYANAN

TGV-6KWA

Generator Uap (6 kW) (untuk tekanan dan suhu tinggi)

It is an electrical heating horizontal steam generator (with two heating elements of 6 kW each). It consists of a horizontal cylindrical body with torispherical ends joined by arc welding.This type of generator produces 12 Kg.v.h of steam for a...
Lihat Unit
STEAM GENERATOR (18 KW) (FOR HIGH PRESSURES AND HIGH TEMPERATURES) - TGV-18KWA
  • TGV-18KWA
Available
MODUL LAYANAN

TGV-18KWA

Generator Uap (18 kW) (untuk tekanan dan suhu tinggi)

It is an electrical heating horizontal steam generator (with three heating elements of 6 kW each). It consists of a horizontal cylindrical body with torispherical ends joined by arc welding.This type of generator produces 36 Kg.v.h of steam for a...
Lihat Unit
WATER HEATER MODULE - WHM
  • WHM
Available
MODUL LAYANAN

WHM

Water Heater Module

The Water Heater Module, "WHM", designed by EDIBON is an efficient device for rapid and precise fluid heating. The water heater module can be used as a complement to other units for water heating. The unit can be used to heat the fluid to the...
Lihat Unit
REFRIGERATION OR HEATING WATER RECIRCULATION UNIT - TERA
  • TERA
Available
MODUL LAYANAN

TERA

Peralatan Sirkulasi Ulang Air Pendingin atau Pemanas

The Refrigeration Water Recirculation Unit, "TERA", is a reversible heat pump that allows the heating and cooling of a volume of water.It is a recirculation heat pump designed to provide a continuous supply of water cooled or heated at the...
Lihat Unit
MAINTENANCE KIT CONTAINING LEAKAGE DETECTOR - T/KIT2
  • T/KIT2
Available
MODUL LAYANAN

T/KIT2

Kit Pemeliharaan yang Berisi Detektor Kebocoran

The Maintenance Kit containing Leakage Detector, "T/KIT2", designed by EDIBON, includes a portable detector sensitive to concentrations of all commercial refrigerants with the objective of locating leaks in refrigeration systems. Refrigerants...
Lihat Unit
SILENT AIR COMPRESSOR UNIT - SAC
  • SAC
Available
6.1.3.2.- PNEUMATIKA

SAC

Peralatan Kompresor Udara Senyap

The Silent Air Compressor Unit, "SAC," has been designed by EDIBON to supply compressed air to EDIBON unit that includes pneumatic circuits.The silent air compressor represents an essential component in any industrial environment. This unit,...
Lihat Unit
HYDRAULIC POWER UNIT - HPU
  • HPU
Available
6.1.3.1.- HIDROLIKA

HPU

Peralatan Kelompok Hidraulik

The Hydraulic Power Unit, "HPU", has been designed by EDIBON to include all necessary components to supply pressurized working oil to the EDIBON units with hydraulic circuits.The "HPU" has the components to measure the temperature and the pressure...
Lihat Unit
VACUUM PRODUCTION FOR CORROSIVE GASES UNIT - VPCG
  • VPCG
Available
KELOMPOK TEKANAN UNTUK CAIRAN

VPCG

Peralatan Produksi Vakum untuk Gas Korosif

The Vacuum Production for Corrosive Gases Unit, "VPCG", has been designed by EDIBON for the extraction of gases from the interior of certain unit or systems to generate vacuum to EDIBON unit, mainly to those whose process is corrosive.Vacuum pumps...
Lihat Unit
HYDRAULICS BENCH - FME00
  • FME00
Available
8.1.1.- UNIT DASAR

FME00

Unit Hidrolik

The Hydraulics Bench, "FME00", designed by EDIBON, allows the study of fluid behaviour, hydraulic theory and the properties of fluid mechanics.It is formed by a movable hydraulics bench used to hold a wide variety of modules, which allow the...
Lihat Unit
BASIC HYDRAULIC FEED SYSTEM - FME00/B
  • FME00/B
Available
8.1.1.- UNIT DASAR

FME00/B

Sistem Pengumpan Hidrolik Dasar

The Basic Hydraulic Feed System, "FME00/B", designed by EDIBON is a service unit for different Fluid Mechanics Units as: "FME" type modules, Fluid Friction in Pipes Unit "AFT", etc., increasing the equipment profitability.
Lihat Unit
AUXILIARY TRANSFORMER AND PROTECTION UNITS - AUTP
  • AUTP
Available
TRANSFORMATOR BANTU DAN PERLINDUNGAN

AUTP

Unit Transformator Bantuan dan Perlindungan

The Auxiliary Transformer and Protection Units, "AUTP", are a range of auxiliary single phase and three phase transformers used to adapt the voltage level of any country in the appropriate voltage for EDIBON units. They have an input voltage range...
Lihat Unit
Meminta informasi