8.9.- PEMASANGAN DAN PEMELIHARAAN

Kebutuhan masyarakat saat ini adalah tantangan bagi industri apa pun, karena mereka harus terus melakukan evolusi dan pembaruan untuk beradaptasi dengan kebutuhan tersebut.

Lihat Lebih Banyak

Dalam beberapa tahun terakhir, sebagai akibat dari revolusi industri atau Industri 4.0 baru, munculnya Industrial Internet of Things (IIoT) dan Pabrik Cerdas, adaptasi tersebut dimungkinkan berkat penerapan teknik paling canggih dalam desain fasilitas baru atau dalam renovasi dari yang sudah ada.

Terlepas dari semua kemajuan teknologi dan kontrol menyeluruh yang dilakukan, tidak boleh dilupakan bahwa setiap elemen yang mengambil bagian dalam proses produktif akan menjadi mengalami keausan mekanis dan listrik (tenaga, beban, dll.) dan masa pakainya terbatas. Untuk menghindari kegagalan katastropik, penghentian produksi atau semua jenis proses yang menyiratkan peningkatan waktu non-produktif dan, oleh karena itu, peningkatan biaya, sangatlah penting untuk melakukan pemeliharaanmesin, sistem kelistrikan, dll.

Biasanya, hanya dua jenis pemeliharaan yang dipertimbangkan:

Korektif: masalah diselesaikan setelah terjadi.
Pencegahan: peninjauan berkala terhadap semua elemen bermasalah tersebut dan penggantinya jika diperlukan.

Jenis pemeliharaan ini melibatkan biaya yang sangat tinggi dan tidak perlu dalam banyak kasus. Saat ini, berkat teknologi yang tersedia, dimungkinkan untuk melakukan pemeliharaan prediktif yang terdiri dari analisis komprehensif dari semua variabel yang berperan dalam semua komponen sistem dan dapat menggantinya pada waktu yang tepat.

Namun, jika lebih banyak kontrol atas kegagalan yang dapat menyebabkan semua komponen mekanis yang dapat aus lebih disukai, ada jenis pemeliharaan lain, yang dikenal sebagai pemeliharaan proaktif. Ini selangkah lebih maju daripada pemeliharaan prediktif, mencari akar masalahnya.

Lihat Produk

PEMASANGAN DAN PEMELIHARAAN PERALATAN

Menampilkan 1 -30 dari 32 produk

UNIT TO STUDY AN ANGULAR NEEDLE VALVE CUTAWAY MODEL - ANVCM

ANVCM

Available

8.9.1.- MODEL BAGIAN

ANVCM

Peralatan Model Potongan Katup Jarum dengan Aliran Sudut

The Unit to Study an Angular Needle Valve Cutaway Model, "ANVCM", allows the students to visualize the inner parts of a valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile features...

UNIT TO STUDY A BALL VALVE CUTAWAY MODEL - BVCM

BVCM

Available

8.9.1.- MODEL BAGIAN

BVCM

Peralatan Model Potongan Katup Bola

The Unit to Study a Ball Valve Cutaway Model, "BVCM", allows the students to visualize the inner parts of a ball valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile features that...

UNIT TO STUDY A LIFT NON-RETURN VALVE CUTAWAY MODEL - LNVCM

LNVCM

Available

8.9.1.- MODEL BAGIAN

LNVCM

Peralatan Model Terpotong Katup Penahan Piston

The Unit to Study a Lift Non-Return Valve Cutaway Model, "LNVCM", allows the students to visualize the inner parts of a needle valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile...

UNIT TO STUDY A NON-RETURN BUTTERFLY VALVE CUTAWAY MODEL - NBVCM

NBVCM

Available

8.9.1.- MODEL BAGIAN

NBVCM

Peralatan Model Terpotong Katup Kupu-Kupu

The Unit to Study a Non-Return Butterfly Valve Cutaway Model, "NBVCM", allows the students to visualize the inner parts of a butterfly valve, to evaluate the relation with each other accurately and to understand their function.It is a valve to...

UNIT TO STUDY A PIPE MESH FILTER CUTAWAY MODEL - PMFCM

PMFCM

Available

8.9.1.- MODEL BAGIAN

PMFCM

Peralatan Model Terpotong dari Saringan Jaring untuk Pipa

The Unit to Study a Pipe Mesh Filter Cutaway Model, "PMFCM", allows the students to visualize the inner parts of a mesh filter, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a mesh filter...

UNIT TO STUDY A STRAIGHT-WAY NEEDLE VALVE CUTAWAY MODEL - SNVCM

SNVCM

Available

8.9.1.- MODEL BAGIAN

SNVCM

Peralatan Model Terpotong dari Katup Jarum Lurus

The Unit to Study a Straight-Way Needle Valve Cutaway Model, "SNVCM", allows the students to visualize the inner parts of a needle valve, to evaluate the relation with each other accurately and to understand their function.It is a device with...

UNIT TO STUDY A WATER METER CUTAWAY MODEL - WMCM

WMCM

Available

8.9.1.- MODEL BAGIAN

WMCM

Peralatan Model Terpotong dari Meteran Air

The Unit to Study a Water Meter Cutaway Model, "WMCM", allows the students to visualize the inner parts of a water meter, to evaluate the relation with each other accurately and to understand their function.It is a model of a device that measures,...

UNIT TO STUDY AN UNDERGROUND HYDRANT CUTAWAY MODEL - UHCM

UHCM

Available

8.9.1.- MODEL BAGIAN

UHCM

Peralatan Model Terpotong Hidran Bawah Tanah

The Unit to Study an Underground Hydrant Cutaway Model, "UHCM", allows the students to visualize the inner parts of a hydrant, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a hydrant is...

CENTRIFUGAL PUMP CUTAWAY MODEL UNIT - CPCM

CPCM

Available

8.9.1.- MODEL BAGIAN

CPCM

Peralatan Model Potongan Pompa Sentrifugal

The Centrifugal Pump Cutaway Model Unit, "CPCM", allows the students to visualize the inner parts of a centrifugal pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of centrifugal pump is...

GPCM

Available

8.9.1.- MODEL BAGIAN

GPCM

Peralatan Model Potongan Pompa Roda Gigi

The Gear Pump Cutaway Model Unit, "GPCM", allows the students to visualize the inner parts of a gear pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of gear pump is composed of real...

PPCM

Available

8.9.1.- MODEL BAGIAN

PPCM

Peralatan Model Terpotong dari Pompa Piston

The Piston Pump Cutaway Model Unit, "PPCM", allows the students to visualize the inner parts of a piston pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of piston pump is composed of...

Available

8.9.2.- MODEL YANG DAPAT DILEPASKAN

ASV

Peralatan Pemasangan Katup Penutup

The Assembly of a Shut-Off Valve Unit, "ASV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts list and the...

ASSEMBLY OF A MOTORIZED CONTROL VALVE UNIT - AMCV

AMCV

Available

8.9.2.- MODEL YANG DAPAT DILEPASKAN

AMCV

Peralatan Pemasangan Katup Kontrol Bermotor

The Assembly of a Motorized Control Valve Unit, "AMCV" is a ball motorized control valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit,...

ASSEMBLY OF A CONTROL PNEUMATIC VALVE UNIT - ACPV

ACPV

Available

8.9.2.- MODEL YANG DAPAT DILEPASKAN

ACPV

Peralatan Pemasangan Katup Kontrol Pneumatik

The Assembly of a Control Pneumatic Valve Unit, "ACPV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts...

Available

8.9.2.- MODEL YANG DAPAT DILEPASKAN

AMP

Instalasi dan Pemeliharaan Pompa

The different sets for the assembly and maintenance of pumps have all the parts in a case for an easy transport, facilitating the clearidentification of all the components and allowing the systematic assembly and disassembly, maintenance and...

ASSEMBLY AND MAINTENANCE OF A CENTRIFUGAL PUMP UNIT - AMCP

Aksesori dari AMP

Available

8.9.2.- MODEL YANG DAPAT DILEPASKAN

AMCP

Peralatan Pemasangan dan Pemeliharaan Pompa Sentrifugal

Aksesori dari AMP

The centrifugal pumps belong to the group of rotodynamic pumps, where the fluid is boosted thanks to the acceleration acquired whenpassing through the operating impeller.This acceleration, which starts from the center of the impeller and goes to...

ASSEMBLY AND MAINTENANCE OF A MULTISTAGE CENTRIFUGAL PUMP UNIT - AMMCP

Aksesori dari AMP

Available

8.9.2.- MODEL YANG DAPAT DILEPASKAN

AMMCP

Peralatan Pemasangan dan Pemeliharaan Pompa Sentrifugal Multistage

Aksesori dari AMP

The multistage centrifugal pumps belong to the group of rotodynamic pumps, where the water is driven by centrifugal forces caused by the rotational movement of the impeller. Multi-stage centrifugal pumps can increase its lifting height, depending...

ASSEMBLY AND MAINTENANCE OF A SCREW PUMP UNIT - AMSP

Aksesori dari AMP

Available

8.9.2.- MODEL YANG DAPAT DILEPASKAN

AMSP

Peralatan Pemasangan dan Pemeliharaan Pompa Sekrup

Aksesori dari AMP

The screw pumps belong to the group of positive displacement pumps, which use aneccentric helical screw (rotor) that moves inside a sleeve (stator), making the liquid flowbetween the screw and the sleeve. The most important applications of this...

ASSEMBLY AND MAINTENANCE OF A DIAPHRAGM PUMP UNIT - AMDP

Aksesori dari AMP

Available

8.9.2.- MODEL YANG DAPAT DILEPASKAN

AMDP

Peralatan Pemasangan dan Pemeliharaan Pompa Diafragma

Aksesori dari AMP

Membrane pumps or diaphragm pumps belong to the group of positive displacement pumps, where the pressure increase is obtained by pushing elastic walls, known as, membranes or diaphragms, which change the volume of the chamber. Retention valves,...

ASSEMBLY AND MAINTENANCE OF A PISTON PUMP UNIT - AMPP

Aksesori dari AMP

Available

8.9.2.- MODEL YANG DAPAT DILEPASKAN

AMPP

Peralatan Pemasangan dan Pemeliharaan Pompa Torak

Aksesori dari AMP

The piston pumps belong to the group of positive displacement pumps, where there are one or several fixed cavities whose volume can be changed due to the effect of a piston. The movement of the fluid is discontinuous and the charge and discharge...

ASSEMBLY AND MAINTENANCE OF AN IN-LINE CENTRIFUGAL PUMP UNIT - AMLCP

Aksesori dari AMP

Available

8.9.2.- MODEL YANG DAPAT DILEPASKAN

AMLCP

Peralatan Pemasangan dan Pemeliharaan Pompa Sentrifugal Dalam Jalur

Aksesori dari AMP

The centrifugal in-line pumps belong to the rotodynamic pump group, these pumps are the most used currently to pump liquids in general. In-line pumps are installed in straight pipes, and the main difference with a standard pump is that the suction...

ASSEMBLY AND MAINTENANCE OF A GEAR PUMP UNIT - AMGP

Aksesori dari AMP

Available

8.9.2.- MODEL YANG DAPAT DILEPASKAN

AMGP

Peralatan Pemasangan dan Pemeliharaan Pompa Roda Gigi

Aksesori dari AMP

The gear pumps belong to the group of positive displacement, rotary piston pumps, which produce flow by transporting the fluid betweenthe teeth of two coupled gears. One of them is driven by the shaft of the pump (driving shaft), which turns the...

PIPES, VALVES AND FITTINGS ASSEMBLY UNIT - PVFA

PVFA

Available

8.9.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

PVFA

Peralatan Pemasangan Pipa, Katup, dan Aksesori

The Pipes, Valves and Fittings Assembly Unit, "PVFA", designed by EDIBON, consists of a solid and rigid U-shaped frame where a series of real pipes and fittings are mounted to form a complete hydraulic system. A filter, a sight glass and a...

BACKFLOW PREVENTION TRAINING UNIT - BFPT

BFPT

Available

8.9.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

BFPT

Peralatan Pelatihan Perangkat Anti-Balik

The Backflow Prevention Training Unit, "BFPT", allows verifying the operation of multiple non-return devices. The system contains the most common backflow prevention devices used in the industry. The main objective is to recognize each element...

THREE-WAY MIXING VALVE TRAINING UNIT - TEV3V

TEV3V

Available

9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TEV3V

Peralatan Pelatihan Katup Pencampur 3 Arah

The Three-Way Mixing Valve Training Unit, "TEV3V", allows to demonstrate the function of a three-way mixing valve in a hot water heating system. The three-way mixing valve in the heating system regulates the supply water temperature to a heating...

FOUR-WAY MIXING VALVE TRAINING UNIT - TEV4V

TEV4V

Available

9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TEV4V

Peralatan Pelatihan Katup Pencampur 4 Arah

The Four-Way Mixing Valve Training Unit, "TEV4V", allows to demonstrate the function of a four-way mixing valve in a hot water heating system. The four-way mixing valve in the heating system regulates the circulation and feed flow temperatures of...

TEIS

Available

9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TEIS

Peralatan Pelatihan Aksesori Sanitasi

The Sanitary Fittings Training Unit, "TEIS", has been designed by EDIBON for training in the plumbing sector. It consists of an anodized aluminum frame and panels in painted steel in which tests can be carried out with the most common systems of...

TIAP

Available

9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TIAP

Peralatan Instalasi Air Minum

The Drinking Water Installation Unit, "TIAP", has been designed to demonstrate domestic water heating from the cold water supply. A typical domestic drinking water system is attached to the front panel of the unit. The unit includes the most...

PROTECTION OF DRINKING WATER TRAINING UNIT - TPAP

TPAP

Available

9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TPAP

Peralatan Perlindungan pada Instalasi Air Minum

The Protection of Drinking Water Training Unit, "TPAP", has been designed by EDIBON to study cases in which the drinking water system is contaminated with wastewater. It is specially designed for the training of students in the plumbing sector.The...

TELT

Available

9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TELT

Peralatan untuk Studi Sistem Pembersihan Pipa

The Pipe Cleaning Training Unit, "TELT", designed by EDIBON, simulates a real house piping system, so original components used in plumbing systems are employed.The objective of this unit is to study the cleaning of pipes from the sanitation...

UNTUK INFORMASI LEBIH LANJUT, HUBUNGI KAMI