8.7.- MESIN FLUIDA

Sebuah aplikasi khusus, area komunikasi dalam mekanika fluida adalah yang bertanggung jawab untuk mempelajari fluida mesin. Mesin fluida adalah perangkat yang mengubah energi fluida yang melewatinya atau mentransfer energi ke fluida. Fluida tersebut dapat berupa gas, uap atau cair.

Lihat Lebih Banyak

Berdasarkan definisi tersebut, mesin fluida dapat diklasifikasikan sebagai berikut:

Mesin pembangkit.

Turbin: torsi dan tenaga disediakan pada poros sebagai hasil dari variasi jumlah gerakan fluida yang melewatinya.
Turbin angin: energi kinetik angin diubah menjadi energi mekanik.

Mesin memakan daya.

Pompa: energi mekanik disuplai ke fluida dalam bentuk pekerjaan untuk menggantikan penurunan tekanan yang dialami fluida akibat gesekan pada pipa.
Kipas: sejumlah besar gas dipindahkan sebagai akibat dari peningkatan tekanan yang dihasilkan. Ada dua tipe dasar kipas: kipas blower atau sentrifugal dan kipas aliran aksial.
Kompresor: aliran yang dipindahkan lebih sedikit jika dibandingkan dengan kipas, tetapi peningkatan tekanannya jauh lebih tinggi.

Mesin telah dirancang sejak zaman kuno dengan tujuan menggunakan energi yang disediakan oleh alam. Misalnya, konversi energi mekanik menjadi energi hidrolik oleh mesin sangat menarik bagi sebagian besar insinyur dan teknisi. Beberapa mesin hidrolik klasik adalah kincir air Romawi atau pers hidrolik. Saat ini, kita dikelilingi oleh mesin fluida dalam kehidupan kita sehari-hari. Beberapa contohnya adalah mesin pesawat, sirkuit pompa di kolam renang atau mobil, kincir angin, kipas pendingin di komputer atau kipas yang digunakan di rumah.

Lihat Produk

MESIN FLUIDA PERALATAN

Menampilkan 1 -30 dari 36 produk

COMPUTER CONTROLLED MULTIPUMP TESTING BENCH (4 TYPES OF PUMPS) - PBOC

PBOC

Available

8.7.1.- POMPA

PBOC

Computer Controlled Multipump Testing Bench (4 types of pumps)

The Computer Controlled Multipump Testing Bench (4 types of pumps), "PBOC", allows the students to study the operating characteristics of several types of pumps. This unit allows to control and to measure the most representative parameters of the...

COMPUTER CONTROLLED MULTIPUMP TESTING BENCH (2 TYPES OF PUMPS) - PB2C

PB2C

Available

8.7.1.- POMPA

PB2C

Computer Controlled Multipump Testing Bench (2 types of pumps)

The Computer Controlled Multipump Testing Bench (2 types of pumps), "PB2C", allows the students to study the operating characteristics of the centrifugal and gear pumps. This unit allows to control and to measure the most representative parameters...

COMPUTER CONTROLLED SERIES/PARALLEL PUMPS BENCH - PBSPC

PBSPC

Available

8.7.1.- POMPA

PBSPC

Computer Controlled Series/Parallel Pumps Bench

The Computer Controlled Series/Parallel Pumps Bench, "PBSPC", is designed to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed water tank,...

PBSPB

Available

8.7.1.- POMPA

PBSPB

Series/Parallel Pumps Bench

The Series/Parallel Pumps Bench, "PBSPB", is designed to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed water tank, circulation pipes,...

COMPUTER CONTROLLED CENTRIFUGAL PUMP BENCH - PBCC

PBCC

Available

8.7.1.- POMPA

PBCC

Computer Controlled Centrifugal Pump Bench

The Computer Controlled Centrifugal Pump Bench, "PBCC", is a bench-top unit consists of a centrifugal pump computer controlled, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump...

PBCB

Available

8.7.1.- POMPA

PBCB

Centrifugal Pump Bench

The Centrifugal Pump Bench, "PBCB", is a bench-top unit consists of a centrifugal pump, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump experiments: two manometer and a flow sensor.A...

COMPUTER CONTROLLED GEAR PUMP BENCH - PBEC

PBEC

Available

8.7.1.- POMPA

PBEC

Computer Controlled Gear Pump Bench

The Computer Controlled Gear Pump Bench, "PBEC", is a bench-top unit consists of a gear pump computer controlled, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump experiments: two...

COMPUTER CONTROLLED AXIAL PUMP BENCH - PBAC

PBAC

Available

8.7.1.- POMPA

PBAC

Computer Controlled Axial Pump Bench

The Computer Controlled Axial Pump Bench, "PBAC", is designed to study this type of pumps. It is a bench-top unit that consists of a computer controlled axial pump, a water tank and circulation pipes with a flow regulation valve. Besides, it...

COMPUTER CONTROLLED PISTON PUMP BENCH - PBRC

PBRC

Available

8.7.1.- POMPA

PBRC

Computer Controlled Piston Pump Bench

The Computer Controlled Piston Pump Bench, "PBRC", is a bench-top unit that consists of a piston pump, a feed tank, flow meter tank calibrated for taking flow measurements, circulation pipes, manual valves and a solenoid valve, computer...

COMPUTER CONTROLLED AXIAL FLOW TURBOMACHINES UNIT - HMFAC

HMFAC

Available

8.7.3.- TURBIN

HMFAC

Computer Controlled Axial Flow Turbomachines Unit

The Computer Controlled Axial Flow Turbomachines Unit, "HMFAC", allows the study of single-stage axial turbomachines, with interchangeable vanes for the study of both a pump and a turbine.The main part of the unit is the axial turbomachine...

PBEAB

Available

8.7.1.- POMPA

PBEAB

Pumps Alignment and Study Bench

COMPUTER CONTROLLED CENTRIFUGAL FAN TEACHING UNIT - HVCC

HVCC

Available

8.7.2.- PENGGEMAR

HVCC

Computer Controlled Centrifugal Fan Teaching Unit

The Computer Controlled Centrifugal Fan Teaching Unit, "HVCC", allows the students to study the operation characteristics of a centrifugal fan. For that purpose, the unit carries out the measurements of flow, speed, temperature, pressure and...

HVCB

Available

8.7.2.- PENGGEMAR

HVCB

Centrifugal Fan Teaching Unit

The Centrifugal Fan Teaching Unit, "HVCB", allows the students to study the operation characteristics of a centrifugal fan. For that purpose, the unit carries out the measurements of flow, speed, temperature and humidity. Multiple tests related to...

COMPUTER CONTROLLED AXIAL FAN TEACHING UNIT - HVAC

HVAC

Available

8.7.2.- PENGGEMAR

HVAC

Computer Controlled Axial Fan Teaching Unit

The Computer Controlled Axial Fan Teaching Unit, "HVAC", allows the observation, the study and the working process analysis of an axial-flow fan.The main element of this unit is a computer controlled speed centrifugal fan, which is measured...

HVAB

Available

8.7.2.- PENGGEMAR

HVAB

Axial Fan Teaching Unit

The Axial Fan Teaching Unit, "HVAB", allows the observation, the study and the working process analysis of an axial-flow fan.The main element of this unit is a variable speed centrifugal fan, which is measured through a speed sensor, and a...

COMPUTER CONTROLLED PELTON TURBINE - TPC

Available

5.3.6.- ENERGI HIDROLIK

TPC

Computer Controlled Pelton Turbine

The Computer Controlled Pelton Turbine, "TPC", designed by EDIBON, consists of a small-scale Pelton turbine, with a valve that allows the flow to be regulated. The turbine includes a PELTON runner with 16 buckets, which can be clearly seen through...

COMPUTER CONTROLLED FRANCIS TURBINE - TFC

Available

5.3.6.- ENERGI HIDROLIK

TFC

Computer Controlled Francis Turbine

The Computer Controlled Francis Turbine, "TFC", consists of a small-scale Francis Turbine, with a valve that allows flow regulation and has a ring with adjustable guide vanes that allows control of the angle of incidence of the water in the...

COMPUTER CONTROLLED KAPLAN TURBINE - TKC

Available

5.3.6.- ENERGI HIDROLIK

TKC

Computer Controlled Kaplan Turbine

The Computer Controlled Kaplan Turbine, "TKC", consists of a small-scale Kaplan turbine that has a ring with adjustable guide vanes, which allow the control of water flow in the turbine.In order to raise the fluid, it has a computer controlled...

COMPUTER CONTROLLED RADIAL FLOW TURBINE - TFRC

TFRC

Available

5.3.6.- ENERGI HIDROLIK

TFRC

Computer Controlled Radial Flow Turbine

The Computer Controlled Radial Flow Turbine, "TFRC", consists of a small-scale radial flow turbine with two nozzles at 90 degrees to the perpendicular direction of the axis of rotation.In order to raise the fluid, it has a computer controlled pump...

COMPUTER CONTROLLED AXIAL FLOW TURBINE - TFAC

TFAC

Available

5.3.6.- ENERGI HIDROLIK

TFAC

Computer Controlled Axial Flow Turbine

The Computer Controlled Axial Flow Turbine, "TFAC", consists of a small-scale turbine with single-stage axial flow input. It has eight nozzles that act as water rings to the rotor, four of which have an incidence angle of 20º and the other four of...

COMPUTER CONTROLLED EXPERIMENTAL REACTION TURBINE - HTRC

HTRC

Available

5.3.6.- ENERGI HIDROLIK

HTRC

Computer Controlled Experimental Reaction Turbine

The Experimental Reaction Turbine, Computer Controlled (PC), "HTRC", allows to study the characteristics of operation of a small scale reaction turbine.This unit includes suitable instrumentation to measure the main parameters:There is a pressure...

COMPUTER CONTROLLED EXPERIMENTAL IMPULSE TURBINE - HTIC

HTIC

Available

5.3.6.- ENERGI HIDROLIK

HTIC

Computer Controlled Experimental Impulse Turbine

The Computer Controlled Experimental Impulse Turbine, "HTIC", allows to study the characteristics and the behavior of a small scale impulse turbine.This unit includes suitable instrumentation to measure the main parameters:There is a pressure...

COMPUTER CONTROLLED HYDRAULIC TURBINES MODULAR UNIT - HTMC

HTMC

Available

8.7.3.- TURBIN

HTMC

Computer Controlled Hydraulic Turbines Modular Unit

Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...

Aksesori dari HTMC

Available

8.7.3.- TURBIN

HT-F

Model Turbin Francis

Aksesori dari HTMC

Aksesori dari HTMC

Available

8.7.3.- TURBIN

HT-FA

Model Turbin Aliran Aksial

Aksesori dari HTMC

Aksesori dari HTMC

Available

8.7.3.- TURBIN

HT-FR

Model Turbin Aliran Radial

Aksesori dari HTMC

Aksesori dari HTMC

Available

8.7.3.- TURBIN

HT-K

Model Turbin Kaplan

Aksesori dari HTMC

Aksesori dari HTMC

Available

8.7.3.- TURBIN

HT-P

Model Turbin Pelton

Aksesori dari HTMC

COMPUTER CONTROLLED WIND ENERGY UNIT - EEEC

EEEC

Available

5.3.3.- ENERGI ANGIN

EEEC

Unit Komputer Kontrol Energi Angin.

The Computer Controlled Wind Energy Unit, "EEEC", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The...

Available

5.3.3.- ENERGI ANGIN

EEE

Unit Energi Angin.

The Wind Energy Unit, "EEE", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The unit consists of a...

UNTUK INFORMASI LEBIH LANJUT, HUBUNGI KAMI