7.1.6.- MEKANIKA STRUKTURAL

MEKANIKA STRUKTURAL UNITS

1.- FISIKA 2.- ELEKTRONIKA 3.- KOMUNIKASI 4.- LISTRIK 5.- ENERGI 6.- MEKATRONIK & OTOMASI 7.- MEKANIKA 8.- MEKANIKA FLUIDA 9.- TERMODINAMIK DAN TERMOTEKNIK 10.- PENGENDALIAN PROSES 11.- TEKNIK KIMIA 12.- TEKNOLOGI PANGAN & AIR 13.- LINGKUNGAN HIDUP 14.- TEKNIK BIOMEDIS AKSESORIS LABORATORIUM PABRIK PILOT SESUAI PESANAN
7.1.- TEKNIK MESIN 7.2.- TEKNIK MEKANIK OTOMOTIF 7.3.- TEKNIK MATERIAL 7.4.- PEMASANGAN DAN PEMELIHARAAN
7.1.1.- MECHANICS FUNDAMENTALS KITS 7.1.2.- MESIN SEDERHANA 7.1.3.- STATICS AND DYNAMICS 7.1.4.- GETARAN DAN OSILASI 7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION) 7.1.6.- MEKANIKA STRUKTURAL
Tidak ada subkelompok yang tersedia
Menampilkan 1 -23 dari 23 produk
12 24 36
UNIT FOR STUDYING FORCES IN A JIB CRANE - MFPG
  • MFPG
Available
7.1.6.- MEKANIKA STRUKTURAL

MFPG

Peralatan Studi Gaya pada Lengan Crane

The Unit for studying Forces in a Jib Crane, "MFPG", is designed to study the tensile and compressive forces in a planar central force system based on the example of a crane jib.The unit represents a planar central force system in which multiple...
Lihat Unit
SUSPENSION BRIDGE UNIT - MVS
  • MVS
Available
7.1.6.- MEKANIKA STRUKTURAL

MVS

Peralatan Jembatan Gantung

The Suspension Bridge Unit, "MVS", has been meticulously designed by EDIBON to explore the dynamics of stresses in a suspension bridge system. This unit simulates a suspension bridge using a deck and two parallel main cables, allowing students to...
Lihat Unit
PARABOLIC ARCH UNIT - MARP
  • MARP
Available
7.1.6.- MEKANIKA STRUKTURAL

MARP

Peralatan Busur Parabola

The Parabolic Arch Unit "MARP" contains a pre-shaped articulated arch, which can be subjected to point or evenly distributed loads by means of seven uniformly distributed cables (cords) with hangers.One support of the arch is fixed whereas the...
Lihat Unit
THREE-HINGED ARCH UNIT - MART
  • MART
Available
7.1.6.- MEKANIKA STRUKTURAL

MART

Peralatan Busur Tiga Titik Artikulasi

The Three-Hinged Arch Unit "MART" allows the student to become familiar with three-hinged arches, to calculate the bearing forces (for point load, for uniformly distributed load and for moving load), to investigate the influence of the load on the...
Lihat Unit
UNIT FOR STUDYING FORCES IN DIFFERENT SINGLE PLANE TRUSSES - MFCS1
  • MFCS1
Available
7.1.6.- MEKANIKA STRUKTURAL

MFCS1

Peralatan Studi Gaya pada Berbagai Konfigurasi Rangka Bidang

The Unit for studying Forces in Different Single Plane Trusses, "MFCS1", allows the measurement of the bar forces in various single plane trusses, the study of the dependency on the external force and the comparison of the experimental bar forces...
Lihat Unit
UNIT FOR STUDYING FORCES IN AN OVERDETERMINATE TRUSS - MFCS2
  • MFCS2
Available
7.1.6.- MEKANIKA STRUKTURAL

MFCS2

Peralatan Studi Gaya pada Rangka Hiperstatik

The Unit for studying Forces in an Overdeterminate Truss, "MFCS2", allows the measurement of the bar forces in a statically determinate truss and in a statically overdeterminate truss, the study of the distribution of forces in the single plane...
Lihat Unit
UNIT FOR STUDYING DEFORMATION OF TRUSSES - MFCS3
  • MFCS3
Available
7.1.6.- MEKANIKA STRUKTURAL

MFCS3

Peralatan untuk Studi Deformasi pada Rangka

The Unit for studying Deformation of Trusses, "MFCS3", allows the measurement of the stresses in the bars in different types of trusses, and the study of the dependence of the external force and the comparison of the experimental forces in the...
Lihat Unit
THICK WALLED CYLINDER UNIT - MCPG
  • MCPG
Available
7.1.6.- MEKANIKA STRUKTURAL

MCPG

Peralatan Silinder Berdinding Tebal

In the Thick-Walled Cylinder Unit, "MCPG", the stresses are determined through the measurement of the strains produced on the surface. These strains are measured by strain gauges.The thick-walled vessel consists of an aluminum cylinder of length...
Lihat Unit
TWO HINGED ARCH UNIT - MFL
  • MFL
Available
7.1.6.- MEKANIKA STRUKTURAL

MFL

Peralatan Busur Dua Titik Artikulasi

The Two Hinged Arch Unit, "MFL", designed by EDIBON allows to study the response of an arched beam when an external load is applied on it.The arch is supported on two supports, a fixed one and a movable one. The displacement and horizontal...
Lihat Unit
PORTAL FRAME UNIT - MPO
  • MPO
Available
7.1.6.- MEKANIKA STRUKTURAL

MPO

Peralatan Portal

The Portal Frame Unit, "MPO", designed by EDIBON, allows for precise measurements of vertical and horizontal deflection in an embedded rectangular portal frame. By applying various loads with specific weights, changes in the portal frame’s...
Lihat Unit
STRESS HYPOTHESES UNIT - STH
  • STH
Available
7.1.6.- MEKANIKA STRUKTURAL

STH

Peralatan Hipotesis Tegangan

The Stress Hypotheses Unit, "STH", allows the study and testing of stress hypotheses by applying loads in different directions on a test specimen point and measuring the deformations produced.Normal and shear stresses are applied, avoiding...
Lihat Unit
SIMPLE STABILITY PROBLEMS STUDY UNIT - MEPE
  • MEPE
Available
7.1.6.- MEKANIKA STRUKTURAL

MEPE

Peralatan untuk Studi Masalah Stabilitas

The Simple Stability Problems Study Unit, "MEPE", has been designed to study the stability of a bar subjected to buckling by obtaining the critical load in different configurations. The unit consists of two bars of same length connected by a...
Lihat Unit
UNIT FOR STUDYING METHODS TO DETERMINE THE ELASTIC LINE - MDLE
  • MDLE
Available
7.1.6.- MEKANIKA STRUKTURAL

MDLE

Peralatan Studi Metode untuk Menentukan Garis Elastis

The Unit for studying Methods to Determine the Elastic Line, "MDLE", consists of set of beams, several supports (with clamp fixing and dial gauges, and with force gauge), a device to generate a bending moment, fixed pulleys, dial gauges and a set...
Lihat Unit
THIN CYLINDER UNIT - MCD
  • MCD
Available
7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MCD

Peralatan Silinder Tipis

The Thin Cylinder Unit, "MCD", has been developed to enable the student to verify various analytical formulae with actual measured results. Strain gauges mounted in various positions and orientations on the cylinder provide an opportunity for...
Lihat Unit
UNIT TO STUDY STRESS ON A MEMBRANE - SSM
  • SSM
Available
7.1.6.- MEKANIKA STRUKTURAL

SSM

Peralatan untuk Studi Tegangan pada Membran

The Unit to Study Stress on a Membrane, "SSM", designed by EDIBON, allows the study of stresses and deformations in a thin disc or membrane subjected to different compressive stresses.The main element of the equipment is a thin disc or membrane...
Lihat Unit
UNSYMMETRICAL CANTILEVER UNIT - MVV
  • MVV
Available
7.1.6.- MEKANIKA STRUKTURAL

MVV

Peralatan Balok Kantilever

The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...
Lihat Unit
DEFLECTION OF CURVED BARS UNIT - MDB
  • MDB
Available
7.3.2.1.- UJI MEKANIK

MDB

Peralatan Defleksi pada Batang Melengkung

The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...
Lihat Unit
BEAM DEFLECTION UNIT - MFV
  • MFV
Available
7.3.2.1.- UJI MEKANIK

MFV

Demonstrator Lenturan Balok

The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...
Lihat Unit
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- UJI MEKANIK

MFLT

Peralatan Tekuk pada Batang

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
Lihat Unit
EULER BUCKLING MODES UNIT - MEBM
  • MEBM
Available
7.3.2.1.- UJI MEKANIK

MEBM

Peralatan Modus Tekuk Euler

With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
Lihat Unit
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- UJI MEKANIK

MUP

Peralatan Universal untuk Tekuk

The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
Lihat Unit
SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF
  • MMF
Available
7.3.2.1.- UJI MEKANIK

MMF

Peralatan Momen Lentur dan Gaya Geser

The Shear Force and Bending Momentum Unit, "MMF", unit is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the application of one...
Lihat Unit
Meminta informasi