7.3.- TEKNIK MATERIAL

Teknik material adalah cabang ilmiah dan industri yang bertanggung jawab untuk membuat interpretasi industri dari ilmu material. Secara antropologis, berbagai tahapan manusia pengembangan telah diklasifikasikan menurut bahan yang digunakan dalam pembuatan alat (Zaman Batu, Zaman Perunggu, dll.). Dengan demikian, perkembangan umat manusia terkait erat dengan studi tentang bahan baru.

Lihat Lebih Banyak

Selama 200 tahun terakhir, penemuan tentang material, yang mengungkapkan kontribusi dari Gibbs, telah dibuat. Dia mendemonstrasikan adanya hubungan antara properti material dan strukturnya. Penemuan ini telah memungkinkan pengembangan materi baru, seperti graphene, dan penyelidikan bidang baru, seperti nanomaterial atau nanoteknologi.

Sejumlah besar pengujian telah dilakukan untuk mencapai tingkat pengembangan tersebut, termasuk pengujian tekukan mekanis, pengujian kekerasan (Rockell, Brinell, Vickers, Martens), uji torsi, uji tarik (ketangguhan dan ketahanan), uji tarik (creep ), pengujian geser, serta uji kimia (perlakuan termal, struktur internal, dll.). Demikian pula, bahan dapat diklasifikasikan sebagai:

  • Logam (ferrous dan non-ferrous).
  • Keramika.
  • Polimer (termoplastik, plastik termoseting, dan elastomer).
  • Bahan komposit.

Penerapan kemajuan ini terbukti di berbagai area industri, seperti otomotif, elektronik, dirgantara, aeronautika dan biomedis, sehingga memberikan teknik material pentingnya hal tersebut dalam masyarakat saat ini.

Lihat Produk
Materi Terkait

TEKNIK MATERIAL PERALATAN

1.- FISIKA 2.- ELEKTRONIKA 3.- KOMUNIKASI 4.- LISTRIK 5.- ENERGI 6.- MEKATRONIK & OTOMASI 7.- MEKANIKA 8.- MEKANIKA FLUIDA 9.- TERMODINAMIK DAN TERMOTEKNIK 10.- PENGENDALIAN PROSES 11.- TEKNIK KIMIA 12.- TEKNOLOGI PANGAN & AIR 13.- LINGKUNGAN HIDUP 14.- TEKNIK BIOMEDIS AKSESORIS LABORATORIUM PABRIK PILOT SESUAI PESANAN
7.1.- TEKNIK MESIN 7.2.- TEKNIK MEKANIK OTOMOTIF 7.3.- TEKNIK MATERIAL 7.4.- PEMASANGAN DAN PEMELIHARAAN
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN 7.3.2.- PENGUJIAN MATERI 7.3.3.- TEKNIK MANUFAKTUR DAN PEMELIHARAAN
7.3.2.1.- UJI MEKANIK 7.3.2.2.- UJI TERMAL DAN AKUSTIK 7.3.3.1.- PENDANAAN
Menampilkan 1 -29 dari 29 produk
12 24 36
COMPUTER CONTROLLED PHOTOELASTICITY UNIT - EFOC
  • EFOC
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN

EFOC

Peralatan Fotoelastisitas, Dikendalikan dari Komputer (PC)

Unit for photoelasticity practices, illustrating the subjects of the photoelasticity theory, the elasticity theory, strength of materials, and structure theory.It is very suitable for the introduction and study of photoelasticity: optical...
Lihat Unit
PHOTOELASTICITY UNIT - EFO
  • EFO
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN

EFO

Peralatan Fotoelastisitas

Unit for photoelasticity practices, illustrating the subjects of the Photoelasticity theory, the Elasticity theory, Strength of Materials, and Structure theory.It is very suitable for the introduction and study of photoelasticity: optical...
Lihat Unit
STRAIN GAUGE TRAINING UNIT - MEGE
  • MEGE
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN

MEGE

Peralatan Pelatihan Strain Gauge

The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...
Lihat Unit
UNIT FOR DETERMINING THE GAUGE FACTOR OF STRAIN GAUGES - MFGE
  • MFGE
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN

MFGE

Peralatan untuk Penentuan Faktor Strain Gauge

The Unit for Determining the Gauge Factor of Strain Gauges, "MFGE", allows to determine the k factor of strain gauges.The bar rests on two supports with ball bearings, so that it is possible to work with a load under pure bending.To perform such...
Lihat Unit
PHOTOELASTIC STRESS DEMONSTRATION UNIT - PSD
  • PSD
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN

PSD

Peralatan Demonstrasi Fotoelastis Tegangan

The Photoelastic Stress Demonstration Unit, "PSD", consists of a frame on which the test specimens are placed. The specimens are made of a special transparent material that has a double optical refraction effect under the action of a mechanical...
Lihat Unit
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- UJI MEKANIK

EEU/20KN

Peralatan Uji Material Universal

The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...
Lihat Unit
BRINELL HARDNESS TESTING UNIT - EEDB
  • EEDB
Available
7.3.2.1.- UJI MEKANIK

EEDB

Peralatan Uji Kekerasan "Brinell"

The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...
Lihat Unit
CREEP TESTING UNIT - EEFCR
  • EEFCR
Available
7.3.2.1.- UJI MEKANIK

EEFCR

Peralatan Uji Fluensi "Creep"

The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...
Lihat Unit
COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC
  • EEFC
Available
7.3.2.1.- UJI MEKANIK

EEFC

Peralatan Uji Kelelahan, Dikendalikan dari Komputer (PC)

The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...
Lihat Unit
FATIGUE TESTING UNIT - EEF
  • EEF
Available
7.3.2.1.- UJI MEKANIK

EEF

Peralatan Uji Kelelahan

The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...
Lihat Unit
CHARPY AND IZOD IMPACT TESTING UNIT - EEICI
  • EEICI
Available
7.3.2.1.- UJI MEKANIK

EEICI

Peralatan Uji Impak Charpy dan Izod

The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...
Lihat Unit
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- UJI MEKANIK

MUP

Peralatan Universal untuk Tekuk

The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
Lihat Unit
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- UJI MEKANIK

MFLT

Peralatan Tekuk pada Batang

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
Lihat Unit
EULER BUCKLING MODES UNIT - MEBM
  • MEBM
Available
7.3.2.1.- UJI MEKANIK

MEBM

Peralatan Modus Tekuk Euler

With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
Lihat Unit
TORSION AND BEND UNIT - MTP
  • MTP
Available
7.3.2.1.- UJI MEKANIK

MTP

Peralatan Torsi dan Lentur

The Torsion and Bend Unit, "MTP", is a combined apparatus for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate its transport...
Lihat Unit
TORSION UNIT - MTB
  • MTB
Available
7.3.2.1.- UJI MEKANIK

MTB

Peralatan Torsi

The Torsion Unit, "MTB", allows to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a metallic rod is fastened by...
Lihat Unit
TORSION TEST UNIT (30NM) - MTT
  • MTT
Available
7.3.2.1.- UJI MEKANIK

MTT

Peralatan Uji Torsi (30Nm)

To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...
Lihat Unit
TENSILE TESTER UNIT - MTTU
  • MTTU
Available
7.3.2.1.- UJI MEKANIK

MTTU

Peralatan Uji Tarik

With the Tensile Tester Unit, "MTTU", tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different...
Lihat Unit
DEFLECTION OF CURVED BARS UNIT - MDB
  • MDB
Available
7.3.2.1.- UJI MEKANIK

MDB

Peralatan Defleksi pada Batang Melengkung

The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...
Lihat Unit
BEAM DEFLECTION UNIT - MFV
  • MFV
Available
7.3.2.1.- UJI MEKANIK

MFV

Demonstrator Lenturan Balok

The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...
Lihat Unit
SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF
  • MMF
Available
7.3.2.1.- UJI MEKANIK

MMF

Peralatan Momen Lentur dan Gaya Geser

The Shear Force and Bending Momentum Unit, "MMF", unit is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the application of one...
Lihat Unit
CENTRIFUGAL CASTING, BUILDING-UP TRAINING SET 2 - MCEN
  • MCEN
Available
7.3.3.1.- PENDANAAN

MCEN

Kit Pengecoran Praktis: Pengecoran Sentrifugal

The Practical Casting Kit: Centrifugal Casting, "MCEN", designed by EDIBON, is an essential educational unit for teaching the fundamentals of centrifugal casting. This unit enables students to develop practical skills in centrifugal casting...
Lihat Unit
Meminta informasi