6.1.- MEKATRONIK

Mekatronika adalah bidang teknik yang mencakup teknik mesin, teknik elektronik, dan teknik komputer. Tujuan utama mekatronika adalah otomatisasi mesin. Untuk mencapai tujuan ini, Industri Otomasi telah mengembangkan elektromekanis dan sistem terkomputerisasi untuk memiliki kontrol optimal atas proses industrinya. Model matematika untuk mengembangkan sistem dengan perilaku yang diinginkan diperoleh dengan elektronik kontrol.

Lihat Lebih Banyak

Saat ini, mekatronika berupaya meningkatkan mekanisme untuk mendapatkan operasi yang terkontrol dan otonom, merancang PID (Proportional-Integral-Derivative Controller) algoritma kontrol untuk menjalankan kontrol umpan balik dan menerapkan kontrol optimal, kontrol prediktif, dan kontrol non-linier teknik. Semua teknik kontrol ini diterapkan pada kontrol variabel suhu, aliran, tekanan, dll. Menggunakan instrumentasi industri.

Inovasi berkelanjutan dan peningkatan teknologi mengarahkan mekatronika ke desain mekanisme yang lebih kompleks dan canggih, dengan fitur yang lebih baik dan kapasitas kontrol yang besar. Mereka dapat melakukan proses otomatis melalui aktuasi pneumatik dan elektropneumatik, memperoleh gerakan cepat dan berulang, atau hidraulik atau Aktuasi elektrohidraulik, memperoleh torsi besar, kontrol gerak yang presisi dan cepat melalui teknologi motor servo, dan instrumentasi industri berbiaya rendah, dengan hebat fitur dan dapat diterapkan di Industri 4.0 baru.

Lihat Produk

MEKATRONIK PERALATAN

1.- FISIKA 2.- ELEKTRONIKA 3.- KOMUNIKASI 4.- LISTRIK 5.- ENERGI 6.- MEKATRONIK & OTOMASI 7.- MEKANIKA 8.- MEKANIKA FLUIDA 9.- TERMODINAMIK DAN TERMOTEKNIK 10.- PENGENDALIAN PROSES 11.- TEKNIK KIMIA 12.- TEKNOLOGI PANGAN & AIR 13.- LINGKUNGAN HIDUP 14.- TEKNIK BIOMEDIS AKSESORIS LABORATORIUM PABRIK PILOT SESUAI PESANAN
6.1.- MEKATRONIK 6.2.- OTOMASI PLC
6.1.1.- KONTROL 6.1.2.- ELEKTRONIKA 6.1.3.- HIDROLIK DAN PNEUMATIKA 6.1.4.- PERANGKAT LUNAK MECHATRONICS
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS 6.1.1.2.- PENGONTROL INDUSTRI 6.1.1.3.- APLIKASI SISTEM INDUSTRI 6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK 6.1.2.2.- ELEKTRONIK TENAGA DAN ELEKTRONIK INDUSTRI 6.1.3.1.- HIDROLIKA 6.1.3.2.- PNEUMATIKA
Menampilkan 1 -30 dari 64 produk
12 24 36
COMPUTER CONTROLLED MODULAR CONTROL AND REGULATION UNIT - RYC/T
  • RYC/T
Available
10.1.- TEORITIS - DASAR PRAKTIS

RYC/T

Computer Controlled Modular Control and Regulation Unit

Regulation and control theory is divided into two major divisions in, namely, classical and modern. The implementation of classical controller designs as compared to systems designed using modern control theory is easier and these controllers are...
Lihat Unit
BALL AND BEAM MODULE - RYC-BB
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS

RYC-BB

Ball and Beam Module

Aksesori dari RYC, RYC/T
The "RYC-BB" Ball and Beam module has been designed to study a practical control system, through the study of a classical control system, the Ball and Beam Control system.The "RYC-BB" module consists of two main components: the "RYC-BB" apparatus...
Lihat Unit
DC SERVO MOTOR MODULE - RYC-SM
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS

RYC-SM

DC Servo Motor Module

Aksesori dari RYC, RYC/T
The "RYC-SM" Servo Motor module has been designed to study a practical control system, through the control of the position and speed of a DC Servo Motor.The "RYC-SM" module consists of two main components: the "RYC-SM" apparatus and the "RYC-SM"...
Lihat Unit
AIR FLOW TEMPERATURE CONTROL MODULE - RYC-TAR
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS

RYC-TAR

Air Flow Temperature Control Module

Aksesori dari RYC, RYC/T
The "RYC-TAR" Air Flow Temperature Control module has been designed to study a practical control system, through the control of an air flow temperature.The "RYC-TAR" module consists of two main components: the "RYC-TAR" apparatus and the "RYC-TAR"...
Lihat Unit
INVERTED PENDULUM CONTROL MODULE - RYC-PI
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS

RYC-PI

Inverted Pendulum Control Module

Aksesori dari RYC, RYC/T
The "RYC-PI" Inverted Pendulum Control module has been designed to study a practical control system, through the control of a linear position system of movable cart.The "RYC-PI" module consists of two main components: the "RYC-PI" apparatus and...
Lihat Unit
MAGNETIC LEVITATION CONTROL MODULE - RYC-CLM
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS

RYC-CLM

Magnetic Levitation Control Module

Aksesori dari RYC, RYC/T
The "RYC-CLM" Magnetic Levitation Control module has been designed to study a practical control system.The "RYC-CLM" module consists of two main components: the "RYC-CLM" apparatus and the "RYC-CLM" interface box. The "RYC-CLM" apparatus contains...
Lihat Unit
WATER FLOW TEMPERATURE CONTROL MODULE - RYC-TAG
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS

RYC-TAG

Water Flow Temperature Control Module

Aksesori dari RYC, RYC/T
The "RYC-TAG" Water Flow Temperature Control module has been designed to study a practical control system, through the control of water flow temperature.The "RYC-TAG" module consists of two main components: the "RYC-TAG" apparatus and the...
Lihat Unit
TEMPERATURE CONTROL MODULE - RYC-TE
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS

RYC-TE

Temperature Control Module

Aksesori dari RYC, RYC/T
The "RYC-TE" Temperature Control module has been designed to study a practical control system, through the control of the water temperature in a tank.The "RYC-TE" module consists of two main components: the "RYC-TE" apparatus and the "RYC-TE"...
Lihat Unit
PRESSURE CONTROL MODULE - RYC-P
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS

RYC-P

Pressure Control Module

Aksesori dari RYC, RYC/T
The "RYC-P" Pressure Control module has been designed to study a practical control system, through the control of the air pressure level of an air pressure tank.The "RYC-P" module consists of two main components: the "RYC-P" apparatus and the...
Lihat Unit
LEVEL CONTROL MODULE - RYC-N
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS

RYC-N

Level Control Module

Aksesori dari RYC, RYC/T
The "RYC-N" Level Control module has been designed to study a practical control system, through the control of the water level of a tank.The "RYC-N" module consists of two main components: the "RYC-N" apparatus and the "RYC-N" interface box. The...
Lihat Unit
FLOW RATE CONTROL MODULE - RYC-C
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS

RYC-C

Flow Rate Control Module

Aksesori dari RYC, RYC/T
The "RYC-C" Flow Rate Control module has been designed to study a practical control system, through the flow rate of a close water circuit.The "RYC-C" module consists of two main components: the "RYC-C" apparatus and the "RYC-C" interface box. The...
Lihat Unit
LUMINOSITY CONTROL MODULE - RYC-I
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS

RYC-I

Luminosity Control Module

Aksesori dari RYC, RYC/T
The "RYC-I" Luminosity Control module has been designed to study a practical control system and study different light sensors, through the luminosity control with three different light sensors.The "RYC-I" module consists of two main components:...
Lihat Unit
PH CONTROL MODULE - RYC-pH
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS

RYC-pH

pH Control Module

Aksesori dari RYC, RYC/T
The "RYC-pH" pH Control module has been designed to study a practical control system, through the pH dissolution control in a stirred tank.The "RYC-pH" module consists of two main components: "RYC-pH" apparatus and "RYC-pH" interface box. The...
Lihat Unit
POSITION CONTROL MODULE - RYC-CP
Available
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS

RYC-CP

Position Control Module

Aksesori dari RYC, RYC/T
The "RYC-CP" Position Control module has been designed to study a practical control system, through the control of a linear position system.The "RYC-CP" module consists of two main components: the "RYC-CP" apparatus and the "RYC-CP" interface box....
Lihat Unit
INDUSTRIAL CONTROLLERS UNIT - CECI
  • CECI
Available
6.1.1.2.- PENGONTROL INDUSTRI

CECI

Pelatihan Kontrol Industri

The Industrial Controllers Unit, "CECI", is based on a modular design structure whose functionality is divided into different modules toallow the student a better understanding of the unit. The modules included in the unit are: industrial...
Lihat Unit
INDUSTRIAL CONTROLLERS NETWORKING - CRCI
  • CRCI
Available
6.1.1.2.- PENGONTROL INDUSTRI

CRCI

Jaringan Kontrol Industri

The Industrial Controllers Networking, "CRCI", unit is based on a modular design structure whose functionality is divided into different modules to allow the student a better understanding of the unit. The modules provided with the unit are: two...
Lihat Unit
COMPUTER CONTROLLED CONTROLLER TUNING UNIT - CEAC
  • CEAC
Available
6.1.1.2.- PENGONTROL INDUSTRI

CEAC

Pelatihan Penyesuai Kontrol

The Computer Controlled Controller Tuning Unit, "CEAC", provides the tools to simulate different industrial processes in a HIL system and control them with a commercial industrial controller. The CEAC unit works in conjunction with a computer, in...
Lihat Unit
FIELD BUS APPLICATIONS UNIT - CEAB
  • CEAB
Available
6.1.1.2.- PENGONTROL INDUSTRI

CEAB

Pelatihan untuk Aplikasi Field Bus

The Trainer for Field Bus Applications, "CEAB", provides the components to conform a real Profibus DP Network where the PC is the master device and different components included with the unit are the slave devices. The "CEAB" unit also allows to...
Lihat Unit
COMPUTER CONTROLLED COUPLED TANKS SYSTEM - CTAC
  • CTAC
Available
6.1.1.3.- APLIKASI SISTEM INDUSTRI

CTAC

Computer Controlled Coupled Tanks System

The Computer Controlled Coupled Tanks System, "CTAC", consists of four transparent tanks, each with a pressure sensor to measure the water level.The coupling configuration between tanks can be modified by the use of computer controlled solenoid...
Lihat Unit
COMPUTER CONTROLLED PROCESS CONTROL (ELECTRONIC VALVE) - UCP
  • UCP
Available
6.1.1.3.- APLIKASI SISTEM INDUSTRI

UCP

Unit Kontrol Proses Komputer Terkendali (Katup Elektronik)

The Computer Controlled Process Control (Electronic Valve), "UCP", designed by EDIBON, allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH, conductivity and...
Lihat Unit
COMPUTER CONTROLLED PROCESS CONTROL (PNEUMATIC VALVE) - UCPCN
  • UCPCN
Available
6.1.1.3.- APLIKASI SISTEM INDUSTRI

UCPCN

Unit Kontrol Proses Komputer Terkendali (Pneumatic Valve)

The Computer Controlled Process Control (Pneumatic Valve), "UCPCN", designed by EDIBON, allows the study of several types of automatic control and can be used to control different variables (flow, level, temperature, pressure, pH, conductivity and...
Lihat Unit
COMPUTER CONTROLLED PROCESS CONTROL UNIT FOR THE STUDY OF PRESSURE (AIR) - UCP-P
  • UCP-P
Available
6.1.1.3.- APLIKASI SISTEM INDUSTRI

UCP-P

Unit Komputer Kontrol untuk Belajar Tekanan (Udara)

The Computer Controlled Process Control Unit for the Study of Pressure (Air), "UCP-P", consists of a compressed air duct whose flow is controlled by a pneumatic valve (the compressed air or gas source is not included). The air is supplied through...
Lihat Unit
Meminta informasi