8.7.- MESIN FLUIDA

Sebuah aplikasi khusus, area komunikasi dalam mekanika fluida adalah yang bertanggung jawab untuk mempelajari fluida mesin. Mesin fluida adalah perangkat yang mengubah energi fluida yang melewatinya atau mentransfer energi ke fluida. Fluida tersebut dapat berupa gas, uap atau cair.

Lihat Lebih Banyak

Berdasarkan definisi tersebut, mesin fluida dapat diklasifikasikan sebagai berikut:

  • Mesin pembangkit.
  • Turbin: torsi dan tenaga disediakan pada poros sebagai hasil dari variasi jumlah gerakan fluida yang melewatinya.
  • Turbin angin: energi kinetik angin diubah menjadi energi mekanik.
  • Mesin memakan daya.
  • Pompa: energi mekanik disuplai ke fluida dalam bentuk pekerjaan untuk menggantikan penurunan tekanan yang dialami fluida akibat gesekan pada pipa.
  • Kipas: sejumlah besar gas dipindahkan sebagai akibat dari peningkatan tekanan yang dihasilkan. Ada dua tipe dasar kipas: kipas blower atau sentrifugal dan kipas aliran aksial.
  • Kompresor: aliran yang dipindahkan lebih sedikit jika dibandingkan dengan kipas, tetapi peningkatan tekanannya jauh lebih tinggi.

Mesin telah dirancang sejak zaman kuno dengan tujuan menggunakan energi yang disediakan oleh alam. Misalnya, konversi energi mekanik menjadi energi hidrolik oleh mesin sangat menarik bagi sebagian besar insinyur dan teknisi. Beberapa mesin hidrolik klasik adalah kincir air Romawi atau pers hidrolik. Saat ini, kita dikelilingi oleh mesin fluida dalam kehidupan kita sehari-hari. Beberapa contohnya adalah mesin pesawat, sirkuit pompa di kolam renang atau mobil, kincir angin, kipas pendingin di komputer atau kipas yang digunakan di rumah.

Lihat Produk

MESIN FLUIDA PERALATAN

1.- FISIKA 2.- ELEKTRONIKA 3.- KOMUNIKASI 4.- LISTRIK 5.- ENERGI 6.- MEKATRONIK & OTOMASI 7.- MEKANIKA 8.- MEKANIKA FLUIDA 9.- TERMODINAMIK DAN TERMOTEKNIK 10.- PENGENDALIAN PROSES 11.- TEKNIK KIMIA 12.- TEKNOLOGI PANGAN & AIR 13.- LINGKUNGAN HIDUP 14.- TEKNIK BIOMEDIS AKSESORIS LABORATORIUM PABRIK PILOT SESUAI PESANAN
8.1.- LABORATORIUM MODULER MEKANIK FLUIDA 8.2.- PENGUKURAN 8.3.- HIDROSTATIK 8.4.- VISUALISASI ALIRAN 8.5.- SALURAN HIDROLIK 8.6.- AERODINAMIKA 8.7.- MESIN FLUIDA 8.8.- SISTEM PIPA FLUIDA 8.9.- PEMASANGAN DAN PEMELIHARAAN
8.7.1.- POMPA 8.7.2.- PENGGEMAR 8.7.3.- TURBIN 8.7.4.- AEROGENERATOR 8.7.5.- KOMPRESOR
Menampilkan 1 -30 dari 34 produk
12 24 36
SERIES/PARALLEL PUMPS BENCH - PBSPB
  • PBSPB
Available
8.7.1.- POMPA

PBSPB

Bangku Uji Pompa Seri/Paralel

The Series/Parallel Pumps Bench, "PBSPB", is designed to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed water tank, circulation pipes,...
Lihat Unit
COMPUTER CONTROLLED GEAR PUMP BENCH - PBEC
  • PBEC
Available
8.7.1.- POMPA

PBEC

Bangku Uji Pompa Gigi, Dikendalikan dari Komputer (PC)

The Computer Controlled Gear Pump Bench, "PBEC", is a bench-top unit consists of a gear pump computer controlled, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump experiments: two...
Lihat Unit
CENTRIFUGAL FAN TEACHING UNIT - HVCB
  • HVCB
Available
8.7.2.- PENGGEMAR

HVCB

Peralatan Pembelajaran Kipas Sentrifugal

The Centrifugal Fan Teaching Unit, "HVCB", allows the students to study the operation characteristics of a centrifugal fan. For that purpose, the unit carries out the measurements of flow, speed, temperature and humidity. Multiple tests related to...
Lihat Unit
AXIAL FAN TEACHING UNIT - HVAB
  • HVAB
Available
8.7.2.- PENGGEMAR

HVAB

Peralatan Pembelajaran Kipas Axial

The Axial Fan Teaching Unit, "HVAB", allows the observation, the study and the working process analysis of an axial-flow fan.The main element of this unit is a variable speed centrifugal fan, which is measured through a speed sensor, and a...
Lihat Unit
COMPUTER CONTROLLED PELTON TURBINE - TPC
  • TPC
Available
5.3.6.- ENERGI HIDROLIK

TPC

Turbin Pelton, Dikendalikan dari Komputer (PC)

The Computer Controlled Pelton Turbine, "TPC", designed by EDIBON, consists of a small-scale Pelton turbine, with a valve that allows the flow to be regulated. The turbine includes a PELTON runner with 16 buckets, which can be clearly seen through...
Lihat Unit
COMPUTER CONTROLLED FRANCIS TURBINE - TFC
  • TFC
Available
5.3.6.- ENERGI HIDROLIK

TFC

Turbin Francis, Dikendalikan dari Komputer (PC)

The Computer Controlled Francis Turbine, "TFC", consists of a small-scale Francis Turbine, with a valve that allows flow regulation and has a ring with adjustable guide vanes that allows control of the angle of incidence of the water in the...
Lihat Unit
COMPUTER CONTROLLED KAPLAN TURBINE - TKC
  • TKC
Available
5.3.6.- ENERGI HIDROLIK

TKC

Turbin Kaplan, Dikendalikan dari Komputer (PC)

The Computer Controlled Kaplan Turbine, "TKC", consists of a small-scale Kaplan turbine that has a ring with adjustable guide vanes, which allow the control of water flow in the turbine.In order to raise the fluid, it has a computer controlled...
Lihat Unit
COMPUTER CONTROLLED RADIAL FLOW TURBINE - TFRC
  • TFRC
Available
5.3.6.- ENERGI HIDROLIK

TFRC

Turbin Aliran Radial, Dikendalikan dari Komputer (PC)

The Computer Controlled Radial Flow Turbine, "TFRC", consists of a small-scale radial flow turbine with two nozzles at 90 degrees to the perpendicular direction of the axis of rotation.In order to raise the fluid, it has a computer controlled pump...
Lihat Unit
COMPUTER CONTROLLED AXIAL FLOW TURBINE - TFAC
  • TFAC
Available
5.3.6.- ENERGI HIDROLIK

TFAC

Turbin Aliran Aksial, Dikendalikan dari Komputer (PC)

The Computer Controlled Axial Flow Turbine, "TFAC", consists of a small-scale turbine with single-stage axial flow input. It has eight nozzles that act as water rings to the rotor, four of which have an incidence angle of 20º and the other four of...
Lihat Unit
FRANCIS TURBINE MODEL - HT-F
  • Aksesori dari HTMC
Available
8.7.3.- TURBIN

HT-F

Model Turbin Francis

Aksesori dari HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
Lihat Unit
AXIAL FLOW TURBINE MODEL - HT-FA
  • Aksesori dari HTMC
Available
8.7.3.- TURBIN

HT-FA

Model Turbin Aliran Aksial

Aksesori dari HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
Lihat Unit
RADIAL FLOW TURBINE MODEL - HT-FR
  • Aksesori dari HTMC
Available
8.7.3.- TURBIN

HT-FR

Model Turbin Aliran Radial

Aksesori dari HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
Lihat Unit
KAPLAN TURBINE MODEL - HT-K
  • Aksesori dari HTMC
Available
8.7.3.- TURBIN

HT-K

Model Turbin Kaplan

Aksesori dari HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
Lihat Unit
PELTON TURBINE MODEL - HT-P
  • Aksesori dari HTMC
Available
8.7.3.- TURBIN

HT-P

Model Turbin Pelton

Aksesori dari HTMC
Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...
Lihat Unit
COMPUTER CONTROLLED WIND ENERGY UNIT - EEEC
  • EEEC
Available
5.3.3.- ENERGI ANGIN

EEEC

Peralatan Energi Angin, Dikendalikan dari Komputer (PC)

The Computer Controlled Wind Energy Unit, "EEEC", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The...
Lihat Unit
WIND ENERGY UNIT - EEE
  • EEE
Available
5.3.3.- ENERGI ANGIN

EEE

Peralatan Energi Angin

The Wind Energy Unit, "EEE", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The unit consists of a...
Lihat Unit
COMPUTER CONTROLLED WIND ENERGY BASIC UNIT - MINI-EEEC
  • MINI-EEEC
Available
5.3.3.- ENERGI ANGIN

MINI-EEEC

Peralatan Dasar Energi Angin, Dikendalikan dari Komputer (PC)

The Computer Controlled Wind Energy Basic Unit, "MINI-EEEC", is a small-scale unit designed to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up...
Lihat Unit
Meminta informasi