7.3.2.1.- UJI MEKANIK

UJI MEKANIK UNITS

1.- FISIKA 2.- ELEKTRONIKA 3.- KOMUNIKASI 4.- LISTRIK 5.- ENERGI 6.- MEKATRONIK & OTOMASI 7.- MEKANIKA 8.- MEKANIKA FLUIDA 9.- TERMODINAMIK DAN TERMOTEKNIK 10.- PENGENDALIAN PROSES 11.- TEKNIK KIMIA 12.- TEKNOLOGI PANGAN & AIR 13.- LINGKUNGAN HIDUP 14.- TEKNIK BIOMEDIS AKSESORIS LABORATORIUM PABRIK PILOT SESUAI PESANAN
7.1.- TEKNIK MESIN 7.2.- TEKNIK MEKANIK OTOMOTIF 7.3.- TEKNIK MATERIAL 7.4.- PEMASANGAN DAN PEMELIHARAAN
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN 7.3.2.- PENGUJIAN MATERI 7.3.3.- TEKNIK MANUFAKTUR DAN PEMELIHARAAN
7.3.2.1.- UJI MEKANIK 7.3.2.2.- UJI TERMAL DAN AKUSTIK
Menampilkan 1 -17 dari 17 produk
12 24 36
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- UJI MEKANIK

EEU/20KN

Peralatan Uji Material Universal

The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...
Lihat Unit
BRINELL HARDNESS TESTING UNIT - EEDB
  • EEDB
Available
7.3.2.1.- UJI MEKANIK

EEDB

Peralatan Uji Kekerasan "Brinell"

The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...
Lihat Unit
CREEP TESTING UNIT - EEFCR
  • EEFCR
Available
7.3.2.1.- UJI MEKANIK

EEFCR

Peralatan Uji Fluensi "Creep"

The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...
Lihat Unit
COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC
  • EEFC
Available
7.3.2.1.- UJI MEKANIK

EEFC

Peralatan Uji Kelelahan, Dikendalikan dari Komputer (PC)

The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...
Lihat Unit
FATIGUE TESTING UNIT - EEF
  • EEF
Available
7.3.2.1.- UJI MEKANIK

EEF

Peralatan Uji Kelelahan

The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...
Lihat Unit
CHARPY AND IZOD IMPACT TESTING UNIT - EEICI
  • EEICI
Available
7.3.2.1.- UJI MEKANIK

EEICI

Peralatan Uji Impak Charpy dan Izod

The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...
Lihat Unit
UNIVERSAL BUCKLING UNIT - MUP
  • MUP
Available
7.3.2.1.- UJI MEKANIK

MUP

Peralatan Universal untuk Tekuk

The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...
Lihat Unit
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- UJI MEKANIK

MFLT

Peralatan Tekuk pada Batang

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
Lihat Unit
EULER BUCKLING MODES UNIT - MEBM
  • MEBM
Available
7.3.2.1.- UJI MEKANIK

MEBM

Peralatan Modus Tekuk Euler

With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
Lihat Unit
TORSION AND BEND UNIT - MTP
  • MTP
Available
7.3.2.1.- UJI MEKANIK

MTP

Peralatan Torsi dan Lentur

The Torsion and Bend Unit, "MTP", is a combined apparatus for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate its transport...
Lihat Unit
TORSION UNIT - MTB
  • MTB
Available
7.3.2.1.- UJI MEKANIK

MTB

Peralatan Torsi

The Torsion Unit, "MTB", allows to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a metallic rod is fastened by...
Lihat Unit
TORSION TEST UNIT (30NM) - MTT
  • MTT
Available
7.3.2.1.- UJI MEKANIK

MTT

Peralatan Uji Torsi (30Nm)

To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...
Lihat Unit
TENSILE TESTER UNIT - MTTU
  • MTTU
Available
7.3.2.1.- UJI MEKANIK

MTTU

Peralatan Uji Tarik

With the Tensile Tester Unit, "MTTU", tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different...
Lihat Unit
DEFLECTION OF CURVED BARS UNIT - MDB
  • MDB
Available
7.3.2.1.- UJI MEKANIK

MDB

Peralatan Defleksi pada Batang Melengkung

The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...
Lihat Unit
BEAM DEFLECTION UNIT - MFV
  • MFV
Available
7.3.2.1.- UJI MEKANIK

MFV

Demonstrator Lenturan Balok

The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...
Lihat Unit
SHEAR FORCE AND BENDING MOMENTUM UNIT - MMF
  • MMF
Available
7.3.2.1.- UJI MEKANIK

MMF

Peralatan Momen Lentur dan Gaya Geser

The Shear Force and Bending Momentum Unit, "MMF", unit is formed by an aluminum and steel structure that allows us to perform a mechanical study of different structures.An articulated structure makes it possible to convert the application of one...
Lihat Unit
Meminta informasi