7.- MEKANIKA

Mekanika adalah disiplin ilmu yang mempelajari fenomena fisik yang mempengaruhi unsur-unsur alam. Meski disebut mekanika, sebenarnya ia mencakup mekanika klasik dan kuantum, yang merupakan dua pilar fundamental fisika modern.

Lihat Lebih Banyak

Mekanika klasik berhubungan dengan studi tentang benda kaku serta sistem bilangan terbatas atau tak terbatas (media berkelanjutan) dari derajat kebebasan, sementara mekanika kuantum mempelajari sistem skala kecil atau energi.

Seperti dalam sains eksperimental , setiap studi mekanis suatu benda melibatkan proses analisis, dari proses fisik dan perspektif matematika, dan eksperimen. Namun, tidak seperti disiplin ilmu lainnya, dalam mekanika tidaklah begitu rumit untuk mempelajari perilaku teoretis yang ditafsirkan dalam sistem nyata.

Terima kasih atas kontribusi banyak ilmuwan, seperti Newton, Lagrange, Hamilton atau Schrödinger, beberapa hukum fundamental atau prinsip mekanika dapat ditetapkan:

Hukum Newton.
Prinsip kekekalan momentum.
Prinsip kekekalan energi.
Prinsip kekekalan momentum sudut (atau kinetik) dan persamaan dasar dinamika rotasi.

Mengingat perluasan bidang studinya, lebih mudah untuk menyebutkan bidang yang paling representatif:

Teknik.
Statika.
Dynamics.
Mekanika fluida.
Termodinamika dan perpindahan panas.
Ilmu, elastisitas, dan kekuatan bahan.
Analisis numerik (metode elemen hingga).

Karena evolusi yang konstan dari industri, cabang dari teknik mesin, teknik otomotif dan mobil, perhitungan struktur, pengembangan mesin, serta pemasangan dan pemeliharaannya, adalah yang paling berkembang saat ini.

Lihat Produk

Materi Terkait

MEKANIKA SUBKATEGORI

7.1.- TEKNIK MESIN

Rekayasa mekanik terdiri dari penerapan fisika pada elemen-elemen di sekitar kita untuk memperbaiki perangkat mekanik yang ada atau menciptakan yang baru.Karena didasarkan pada prinsip-prinsip fisik, asal-usulnya berasal dari awal prinsip-prinsip tersebut dan perkembangannya sangat terkait dengan...

lihat

7.2.- TEKNIK MEKANIK OTOMOTIF

Industri otomotif adalah salah satu aplikasi utama teknik mesin saat ini. Kendaraan dengan mesin pembakaran dalam bensin dianggap yang terbesar Penemuan dari abad ke-20, meskipun prototipe pertama sudah dibuat pada akhir abad ke-18. Prototipe pertama berasal dari tahun 1769. Itu adalah kereta...

lihat

7.3.- TEKNIK MATERIAL

Teknik material adalah cabang ilmiah dan industri yang bertanggung jawab untuk membuat interpretasi industri dari ilmu material. Secara antropologis, berbagai tahapan manusia pengembangan telah diklasifikasikan menurut bahan yang digunakan dalam pembuatan alat (Zaman Batu, Zaman Perunggu, dll.)....

lihat

7.4.- PEMASANGAN DAN PEMELIHARAAN

Kebutuhan masyarakat saat ini adalah tantangan bagi industri apa pun, karena mereka harus terus melakukan evolusi dan pembaruan untuk beradaptasi dengan kebutuhan tersebut.Dalam beberapa tahun terakhir, sebagai akibat dari revolusi industri atau Industri 4.0 baru, munculnya Industrial Internet of...

lihat

7.1.- TEKNIK MESIN 7.2.- TEKNIK MEKANIK OTOMOTIF 7.3.- TEKNIK MATERIAL 7.4.- PEMASANGAN DAN PEMELIHARAAN

MEKANIKA PERALATAN

Menampilkan 31 -60 dari 175 produk

MESE-T

Available

7.1.2.2.- RODA GIGI

MESE-T

Studi Roda Gigi

The Geared Study Drive Unit, "MESE", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission.For the...

UNIT FOR THE KINEMATIC STUDY OF GEAR TRAINS - KSGT

KSGT

Available

7.1.2.2.- RODA GIGI

KSGT

Peralatan untuk Studi Kinematika Kereta Roda Gigi

The Unit for the Kinematic Study of Gear Trains, "KSGT", unit includes a pivoting rail with a fixed axle to which two more axles can be fixed in any position in function of the feature to study.The cogwheels may be assembled on the axles in...

UNIT FOR STUDYING EQUILIBRIUM OF MOMENTS ON A TWO ARM LEVER - MEMB2

MEMB2

Available

7.1.3.- STATICS AND DYNAMICS

MEMB2

Peralatan untuk Studi Keseimbangan Momen pada Tuas Dua Lengan

The Unit for studying Equilibrium of Moments on a Two Arm Lever,"MEMB2", allows to study the fundamentals of the equilibrium of moments and the application of the law of levers on a two-arm lever.A pivoted beam in the extreme of a vertical support...

COMPUTER CONTROLLED BALANCE OF RECIPROCATING MASSES UNIT - MBMRC

MBMRC

Available

7.1.3.- STATICS AND DYNAMICS

MBMRC

Peralatan Penyeimbangan Massa Resiprokal, Dikendalikan dari Komputer (PC)

The Computer Controlled Balance of Reciprocating Masses Unit, "MBMRC", is a bench-mounting unit that allows to investigate and examine the free masses and moments of a reciprocating engine with a single cylinder, with two cylinders or with four...

MEAL

Available

7.1.3.- STATICS AND DYNAMICS

MEAL

Peralatan Studi dan Analisis Cam

The Cam Analysis Unit "MEAL" allows to observe the effect of the profile of a cam, the study of the displacement, velocity and acceleration profiles of the cam and the identification of the factors that can modify the dynamics of the cam. This...

CORIOLIS FORCE DEMONSTRATION UNIT - MDFC

MDFC

Available

7.1.3.- STATICS AND DYNAMICS

MDFC

Peralatan untuk Demonstrasi Gaya Coriolis

The Coriolis Force Demonstration Unit, "MDFC", designed by EDIBON, is used to observe the deflection of a jet of water generated by a pump attached to a rotating arm that rotates to different speeds in a horizontal plane. An electronically...

MFCE

Available

7.1.3.- STATICS AND DYNAMICS

MFCE

Peralatan untuk Studi Gaya Sentrifugal

The Centrifugal Force Unit, "MFCE", designed by EDIBON, is used to demonstrate the relationship between centrifugal force, rotational speed, mass of a rotating body and distance from the axis.The unit consists of a vertical axis of rotation and a...

Available

7.1.3.- STATICS AND DYNAMICS

MGI

Giroskop

The Gyroscope, "MGI", allows the experimental demonstration of the different rotation modes of a gyroscope and the moments generated by the gyroscopic effect. The rotor of the electric motor (rotating motor) shares a horizontally supported shaft...

Available

7.1.3.- STATICS AND DYNAMICS

CGU

Peralatan Pengatur Sentrifugal

The Centrifugal Governor Unit, "CGU", has been designed to study the operating mode of different centrifugal governors, including three interchangeable governors: Porter governor, Hartnell governor and Proell governor.Interchangeable governors...

Available

7.1.3.- STATICS AND DYNAMICS

MED

Peralatan Keseimbangan Dinamis/Statis

The Static and Dynamic Balancing Unit, "MED", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is...

Available

7.1.3.- STATICS AND DYNAMICS

MES

Peralatan Keseimbangan Sederhana

The Simple Balancing Unit, "MES", developed by EDIBON is a unit to study and analyze the oscillations and vibrations and how to eliminate or diminish them.Basically, the unit is formed by a shaft mounted on bearings. The shaft is coupled by pulley...

Available

7.1.3.- STATICS AND DYNAMICS

MIF

Peralatan Roda Gila

The Inertia Flywheel Unit, "MIF", consists of an inertia disc with a rotation shaft at the center of the disc.The shaft is supported at two points by bearings.A cord is attached by one of the ends to the shaft and wound around it. At the other end...

MRYE1

Available

7.1.3.- STATICS AND DYNAMICS

MRYE1

Peralatan Roda dan Poros (Bubut)

The Wheel and Axle Unit, "MRYE1", is a unit which allows to investigate the mechanics of a simple wheel and axle machine and to demonstrate the laws of the formation of equilibrium of moments in static systems.Two pulleys with different diameter...

WHEEL AND DIFFERENTIAL AXLE UNIT - MRYE2

MRYE2

Available

7.1.3.- STATICS AND DYNAMICS

MRYE2

Peralatan Roda dan Poros Diferensial (Bubut Diferensial)

The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...

MELH

Available

7.1.3.- STATICS AND DYNAMICS

MELH

Peralatan untuk Studi Hukum Hooke

The Unit for studying Hooke's Law, "MELH", designed by EDIBON, demonstrates the application of Hooke's Law and allows the visualization of the deformation of tension springs under load and the performance of oscillation experiments on a spring –...

MSHU

Available

7.1.3.- STATICS AND DYNAMICS

MSHU

Peralatan Gerak Harmonik Sederhana

This Simple Harmonic Motion Unit, "MSHU", designed by EDIBON, allows many experiments using several pendulums and devices, such as different types of pendulums (simple, bifilar, trifilar and Kater’s pendulum) and springs.Consists of a panel with a...

Available

7.1.3.- STATICS AND DYNAMICS

SRI

Peralatan untuk Studi Momen Inersia Rotasional

The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...

COMPUTER CONTROLLED TORSIONAL VIBRATION UNIT - MEVTC

MEVTC

Available

7.1.4.- GETARAN DAN OSILASI

MEVTC

Peralatan Studi Getaran Torsi, Dikendalikan dari Komputer (PC)

The Computer Controlled Torsional Vibration Unit, "MEVTC", has been designed by EDIBON to study torsion suffered by some shafts with rotation motion, apart from studying the torsional rigidity and the behavior of a torsional vibration system with...

MVRE

Available

7.1.4.- GETARAN DAN OSILASI

MVRE

Peralatan Getaran Pegas Spiral

The Vibration of Coil Spring Unit, "MVRE", has been designed by EDIBON to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion.In this sense, the unit consists of a...

Available

7.1.4.- GETARAN DAN OSILASI

MVL

Peralatan Getaran Bebas

The Free Vibration Unit, "MVL", has been designed by EDIBON to cover a range of demonstrations and experiments which provide the user with an understanding of the free vibrations of a simple spring-mass-damper system. Simple adjustments can be...

MVLF

Available

7.1.4.- GETARAN DAN OSILASI

MVLF

Peralatan Getaran Bebas dan Paksa

The Free and Forced Vibration Unit, "MVLF", has been developed to cover a range of demonstrations and experiments which provide the user with an understanding of the free and forced vibrations of a simple spring-mass-damper system. Simple...

CMVAS

Available

7.1.4.- GETARAN DAN OSILASI

CMVAS

Peralatan Analisis Getaran Mekanis Komprehensif

The Comprehensive Mechanical Vibration Analysis Unit, "CMVAS", has been designed by EDIBON for an in-depth study of vibrations in mechanical systems, a phenomenon present in most industrial and engineering processes. These vibrations can lead to...

UNIT FOR STUDYING FREE VIBRATION OF A BAR - MEVLB

MEVLB

Available

7.1.4.- GETARAN DAN OSILASI

MEVLB

Peralatan Studi Getaran Bebas pada Batang

The Unit for Studying Free Vibration of a Bar,"MEVLB", allows to study the features of the free vibrations of a bending bar.The natural frequency of the bending bar can be modified adding additional loads at the free end of a bar or varying the...

Available

7.1.4.- GETARAN DAN OSILASI

MOT

Peralatan Osilasi Torsi

The Torsional Oscillations Unit, "MOT", is intended for easy experiments. It enables to illustrate and investigate the torsional oscillation in single rotor, multi-rotor and geared systems. The unit basically consists of a rigid frame that have...

COMPUTER CONTROLLED CRITICAL SPEED INVESTIGATION UNIT - MVCC

MVCC

Available

7.1.4.- GETARAN DAN OSILASI

MVCC

Peralatan untuk Penelitian Kecepatan Kritis, Dikendalikan dari Komputer (PC)

Some phenomena that appear in mechanical systems, such as vibration, self-centering and resonance in rotary shafts, can be clearly demonstrated with the Computer Controlled Critical Speed Investigation Unit, "MVCC".The operation of the "MVCC" unit...

MEER

Available

7.1.4.- GETARAN DAN OSILASI

MEER

Peralatan Studi Rotasi Poros

The Whirling of Shafts Unit, "MEER", has been designed by EDIBON to demonstrate and determine different modes of oscillation and resonance of shafts with continuous distribution of mass under different conditions.The operation of the Whirling of...

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MCF

Peralatan Sabuk Gesek

The Belt Friction Unit, "MCF", allows us to carry out studies and investigations to compare the driving torque for a given degree of overlap of a flat belt (leather or rope) and a V belt.With this unit the relationship between the tensions in the...

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEF

Peralatan Studi Gesekan

The Friction Study Unit, "MEF", allows the unit to illustrate the friction force by simple demonstrations.It is designed for the study of the relations between friction forces and normal forces, between hard or soft surfaces, between lubricated or...

MPCO

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MPCO

Peralatan Studi Distribusi Tekanan pada Bantalan

The Journal Bearing Unit, "MPCO", designed by EDIBON, allows to study the pressure distribution in sliding bearings. It illustrates the principle of hydrodynamic lubrication.The unit is mounted on a metallic structure assembled on wheels for its...

MEMT

Available

7.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION)

MEMT

Peralatan Modular Tribologi

The Tribology Modular Unit, "MEMT", designed by EDIBON, consists of a base unit with electronic console and a series of experimental units to investigate and visualize tribological phenomena.MEMT-UB. Drive Unit for Tribological Tests. This unit is...

UNTUK INFORMASI LEBIH LANJUT, HUBUNGI KAMI