6.- MEKATRONIK & OTOMASI

Mekatronika dan Otomasi adalah bidang teknik yang berfokus pada studi dan pengembangan permesinan untuk menerapkan otonom dan cerdas industri proses melalui komputer dan elektronik kontrol. Mesin ini dirancang untuk meningkatkan kontrol dan produktivitas proses industri, selain untuk memfasilitasi pekerjaan bagi manusia. Kontrol gerak mesin dan aktuator, kontrol waktu nyata dari suatu proses, dan otomatisasi PLC meningkatkan ketangkasan dan efisiensi terkait untuk produksi mesin, dan mengurangi semua tindakan yang tidak menambah nilai pada produk akhir atau memperpanjang proses.

Lihat Lebih Banyak

Kebutuhan industri untuk mengotomatiskan proses industri saat ini telah memungkinkan pengembangan elemen kontrol, seperti Programmable Logic Controllers (PLC) , yang meningkatkan kecepatan dan efisiensi proses sederhana dan proses industri lengkap. Penggabungan robot perakitan di jalur perakitan telah meningkatkan volume pekerjaan dan penyesuaian pada produksi. Selain itu, teknologi Kontrol Gerakan, seperti motor servo, memungkinkan untuk melakukan gerakan yang tepat pada posisi, kecepatan kontrol, atau torsi tertentu.

Perkembangan berkelanjutan dari teknologi mekatronika meletakkan dasar dari sistem produksi pintar, meningkatkan kualitas produk jadi sambil mempertahankan kualitas yang konstan, mendeteksi kesalahan di kanan waktu dan menyesuaikan produksi dengan pasar, meningkatkan produksi dan fleksibilitas mesin.

Lihat Produk
Materi Terkait
MEKATRONIK & OTOMASI SUBKATEGORI

6.1.- MEKATRONIK

Mekatronika adalah bidang teknik yang mencakup teknik mesin, teknik elektronik, dan teknik komputer. Tujuan utama mekatronika adalah otomatisasi mesin. Untuk mencapai tujuan ini, Industri Otomasi telah mengembangkan elektromekanis dan sistem terkomputerisasi untuk memiliki kontrol optimal atas...
lihat

6.2.- OTOMASI PLC

Otomatisasi adalah penggunaan sistem yang terkomputerisasi dan elektromekanis untuk mesin kontrol dan proses industri. Salah satu elemen yang dapat mengotomatiskan dan mengontrol proses adalah Programmable Logic Controllers (PLC). PLC adalah komputer industri kecil yang dirancang untuk bekerja di...
lihat
6.1.- MEKATRONIK 6.2.- OTOMASI PLC

MEKATRONIK & OTOMASI PERALATAN

1.- FISIKA 2.- ELEKTRONIKA 3.- KOMUNIKASI 4.- LISTRIK 5.- ENERGI 6.- MEKATRONIK & OTOMASI 7.- MEKANIKA 8.- MEKANIKA FLUIDA 9.- TERMODINAMIK DAN TERMOTEKNIK 10.- PENGENDALIAN PROSES 11.- TEKNIK KIMIA 12.- TEKNOLOGI PANGAN & AIR 13.- LINGKUNGAN HIDUP 14.- TEKNIK BIOMEDIS AKSESORIS LABORATORIUM PABRIK PILOT SESUAI PESANAN
6.1.- MEKATRONIK 6.2.- OTOMASI PLC
6.1.1.- KONTROL 6.1.2.- ELEKTRONIKA 6.1.3.- HIDROLIK DAN PNEUMATIKA 6.1.4.- PERANGKAT LUNAK MECHATRONICS 6.2.1.- OPSI PLC 6.2.2.- EMULATOR PERANGKAT KERAS 6.2.3.- INSTRUMENTASI DAN KONTROL DENGAN PLC 6.2.4.- APLIKASI INDUSTRI DENGAN PLC 6.2.5.- APLIKASI WORKSTATION DENGAN PLC 6.2.6.- SISTEM MANUFAKTUR FLEKSIBEL DENGAN PLC
6.1.1.1.- DASAR-DASAR TEORITIS-PRAKTIS 6.1.1.2.- PENGONTROL INDUSTRI 6.1.1.3.- APLIKASI SISTEM INDUSTRI 6.1.2.1.- SENSOR DAN INSTRUMENTASI ELEKTRONIK 6.1.2.2.- ELEKTRONIK TENAGA DAN ELEKTRONIK INDUSTRI 6.1.3.1.- HIDROLIKA 6.1.3.2.- PNEUMATIKA 6.2.2.1.- SISTEM MANUFAKTUR 6.2.2.2.- TINGKAT DAN KONTROL ALIRAN 6.2.2.3.- TRANSPORTASI DAN KLASIFIKASI 6.2.2.4.- PENGENDALIAN MESIN LISTRIK 6.2.2.5.- PENGENDALIAN LALU LINTAS DAN PARKIR 6.2.2.6.- RUMAH DAN KANTOR 6.2.5.1.- APLIKASI WORKSTATION PARTS FEED 6.2.5.2.- APLIKASI WORKSTATION PROSES 6.2.5.3.- APLIKASI ROTASI WORKSTATION 6.2.5.4.- BAGIAN PENANGANAN APLIKASI WORKSTATION 6.2.5.5.- APLIKASI WORKSTATION ROBOTIC 6.2.5.6.- APLIKASI WORKSTATION IDENTIFIKASI BAGIAN 6.2.5.7.- APLIKASI WORKSTATION CNC 6.2.5.8.- APLIKASI WORKSTATION PENYIMPANAN
Menampilkan 151 -180 dari 211 produk
12 24 36
PIECES FEEDER WORKSTATION - AE-PLC-APS
  • AE-PLC-APS
Available
6.2.5.1.- APLIKASI WORKSTATION PARTS FEED

AE-PLC-APS

Stasiun Pemberi Makan Bagian

The Pieces Feeder Workstation, "AE-PLC-APS", is a unit that works with pneumatics and electro-pneumatics technologies.The function of the "AE-PLC-APS" is to supply pieces and to verify them, if they are acceptable.The pieces will be supplied one...
Lihat Unit
FEEDING WORKSTATION FOR PIECES - AE-PLC-A
  • AE-PLC-A
Available
6.2.5.1.- APLIKASI WORKSTATION PARTS FEED

AE-PLC-A

Stasiun Pemberian Bagian

The "AE-PLC-A" is a feeder workstation commanded by a PLC that provides pieces to the system. The "AE-PLC-A" keeps the pieces in a vertical storage, the workstation take the pieces one by one and place at the quality control zone. The system...
Lihat Unit
MULTIPLE PIECES FEEDER WORKSTATION - AE-PLC-MA
  • AE-PLC-MA
Available
6.2.5.1.- APLIKASI WORKSTATION PARTS FEED

AE-PLC-MA

Stasiun Pemberian Banyak Bagian

The "AE-PLC-MA" is a Multiple Pieces Feeder Workstation commanded by a PLC, which provides three different types of pieces to be assembled in one piece by the industrial robot of the "AE-BR" unit.The "AE-PLC-MA" contains an input pieces area, an...
Lihat Unit
PIECES DISTRIBUTOR WORKSTATION - AE-PLC-DS
  • AE-PLC-DS
Available
6.2.5.1.- APLIKASI WORKSTATION PARTS FEED

AE-PLC-DS

Stasiun Distribusi Bagian

The "AE-PLC-DS" is a feeder workstation commanded by a PLC, which provides pieces made in different color and materials to the system. The "AE-PLC-DS" keeps the pieces in a vertical storage, the workstation take the pieces one by one and place...
Lihat Unit
MOUNTING WORKSTATION - AE-PLC-M
  • AE-PLC-M
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-M

Stasiun Perakitan

The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality...
Lihat Unit
AUTOMATIC PRESSING WORKSTATION - AE-PLC-P
  • AE-PLC-P
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-P

Stasiun Penekanan Otomatis

The "AE-PLC-P" is an automatic pressing workstation commanded by a PLC. The "AE-PLC-P" moves the pieces from the input zone tothe pressing zone, once the piece is detected in the pressing zone, the "AE-PLC-P" emulates pressing the pieces with a...
Lihat Unit
AUTOMATIC SCREW WORKSTATION - AE-PLC-AT
  • AE-PLC-AT
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-AT

Stasiun Pemasangan Sekrup Otomatis

The "AE-PLC-AT" is an automatic screw workstation commanded by a PLC that supply and mount four screws in a piece. The "AE-PLC-AT" keeps the screws in a vertical storage. The workstation take the screws, one by one, and a pneumatic manipulator...
Lihat Unit
BOTTLING WORKSTATION - AE-PLC-MEMB
  • AE-PLC-MEMB
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-MEMB

Stasiun Pembotolan

The "AE-PLC-MEMB" is a bottling workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-MEMB" transport the input bottles, to the filling area. In this zone, the "AE-PLC-MEMB" fills...
Lihat Unit
LABELLING WORKSTATION - AE-PLC-MET
  • AE-PLC-MET
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-MET

Stasiun Pelabelan

The "AE-PLC-MET" is an automatic labelling machine commanded by a PLC. The "AE-PLC-MET" also include a transporting system that carries the incoming bottles to the labelling zone, supplying the bottles one by one.The "AE-PLC-MET" workstation is...
Lihat Unit
DRILLING WORKSTATION - AE-PLC-ST
  • AE-PLC-ST
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-ST

Stasiun Pengeboran

The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.The "AE-PLC-ST"...
Lihat Unit
MOLDING WORKSTATION - AE-PLC-SMOLD
  • AE-PLC-SMOLD
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-SMOLD

Stasiun Pembentukan

The "AE-PLC-SMOLD" is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a molding process by punching the piece with...
Lihat Unit
CUTTING WORKSTATION - AE-PLC-SCOR
  • AE-PLC-SCOR
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-SCOR

Stasiun Pemotongan

The "AE-PLC-SCOR" is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine simulate the process.The "AE-PLC-SCOR"...
Lihat Unit
FILTRATION WORKSTATION - AE-PLC-FT
  • AE-PLC-FT
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-FT

Stasiun Penyaringan

The "AE-PLC-FT" is a filtration system commanded by a PLC. The "AE-PLC-FT" is composed of two tanks with a filter between them. The liquids are pumped from the first tank into the second tank through the filter using a pump and different types of...
Lihat Unit
MIXING WORKSTATION - AE-PLC-MS
  • AE-PLC-MS
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-MS

Stasiun Pencampuran

The "AE-PLC-MS" is a mixing system commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different valves. The system is equipped with flow...
Lihat Unit
PUNCHING WORKSTATION - AE-PLC-PHD
  • AE-PLC-PHD
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-PHD

Stasiun Pelubangan

The "AE-PLC-PHD" is a processing workstation commanded by a PLC. This unit takes a piece and introduces it inside the punching zone that is protected with a polycarbonate screen. Once the piece is inside the punching zone, the hydraulic punching...
Lihat Unit
FILLING WORKSTATION - AE-PLC-FS
  • AE-PLC-FS
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-FS

Stasiun Pengisian

The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves....
Lihat Unit
CORKING WORKSTATION - AE-PLC-CRS
  • AE-PLC-CRS
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-CRS

Stasiun Pemasangan Tutup Botol

The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different...
Lihat Unit
BOTTLE OPENING WORKSTATION - AE-PLC-APB
  • AE-PLC-APB
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-APB

Stasiun Pembukaan Kaleng

The "AE-PLC-APB" is a bottles opening system commanded by a PLC. The unit is equipped with different containers and a retention system based on a cylinder, in order to allow the Robotic Arm Workstation "AE-BR" or the SCARA Arm Workstation "AE-SCA"...
Lihat Unit
CONTROL PROCESSES WORKSTATION - AE-PLC-CP
  • AE-PLC-CP
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-CP

Stasiun Kontrol Proses

The "AE-PLC-CP" is a process control workstation commanded by a PLC that coordinates the work of 3 industrial controllers that regulates in parallel the level, flow rate, temperature and pressure processes. The "AE-PLC-CP" workstation has been...
Lihat Unit
Meminta informasi