AE-PLC-P Stasiun Penekanan Otomatis

6.2.5.2.- APLIKASI WORKSTATION PROSES

AUTOMATIC PRESSING WORKSTATION - AE-PLC-P

SISTEM INOVATIF

The "AE-PLC-P" workstation includes a set of practical exercises through which the student will understand how to control an automatic pressing system with a pneumatic handling system.

Lihat uraian umum

Katalog

Spesifikasi Kontes

Ekspansi

ICAI

Perangkat Lunak Pengajaran Berbantu Komputer Interaktif

BERITA TERKAIT

GAMBARAN UMUM

The "AE-PLC-P" is an automatic pressing workstation commanded by a PLC. The "AE-PLC-P" moves the pieces from the input zone tothe pressing zone, once the piece is detected in the pressing zone, the "AE-PLC-P" emulates pressing the pieces with a hydraulic actuator.

The "AE-PLC-P" workstation is designed as a modular system to facilitate the understanding of the unit. The main components are:

The PLC: is composed by the CPU limit and all extra modules needed to perform a corrent working of the workstation and all the extramodules needed to perform a correct working of the workstation.
The control panel: with start/stop button, emergency pushbutton, reset button, light indicators to show current state of the process, etc.
The pneumatic circuit: contains the required solenoid valves, the pressure components, the filters and regulators to assure the appropriate working of the unit.
The Hydraulic circuit: contains the required solenoid valves, actuators, filters and regulators to assure the appropriate working of the unit.
The workstation: is composed by real industrial components used by the industrial pressing systems with pneumatic manipulator suchas reed sensors, presence sensors, rotary actuators, vacuum cups, etc.

The "AE-PLC-P" is an independent workstation that can work alone and/or in conjunction with other workstation to make up a complete Flexible Manufacturing system*.

*The Flexible manufacturing systems product list is available at "Flexible Manufacturing Systems (FMS)" area of the general catalogue.

LATIHAN DAN PRAKTEK PEDOMAN

LATIHAN PRAKTIS YANG DIANDAL TERMASUK DALAM PANDUAN

Introduction to flexible manufacturing system (FMS).
Introduction to pneumatics and electro-pneumatics.
Introduction to hydraulics and electro-hydraulics.
Introduction to vacuum technology.
Study of the sensor detection.
Configuration of a pneumatic application.
Configuration of a hydraulic application.
Manual control of a Pressing system.
Automatic control of a Pressing system.
Change the parameters of the Pressing process.
Optimization of the process time.
Study and analysis of the faults inserted in the process with the fault generation module.

BARANG YANG DIBUTUHKAN

BARANG TAMBAHAN YANG DISARANKAN

AE-AS

PERALATAN SIMILAR TERSEDIA

AE-PLC-FT

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-FT

Stasiun Penyaringan

The "AE-PLC-FT" is a filtration system commanded by a PLC. The "AE-PLC-FT" is composed of two tanks with a filter between them. The liquids are pumped from the first tank into the second tank through the filter using a pump and different types of...

AE-PLC-MS

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-MS

Stasiun Pencampuran

The "AE-PLC-MS" is a mixing system commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different valves. The system is equipped with flow...

AE-PLC-PHD

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-PHD

Stasiun Pelubangan

The "AE-PLC-PHD" is a processing workstation commanded by a PLC. This unit takes a piece and introduces it inside the punching zone that is protected with a polycarbonate screen. Once the piece is inside the punching zone, the hydraulic punching...

AE-PLC-FS

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-FS

Stasiun Pengisian

The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves....

AE-PLC-CRS

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-CRS

Stasiun Pemasangan Tutup Botol

The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different...

AE-PLC-APB

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-APB

Stasiun Pembukaan Kaleng

The "AE-PLC-APB" is a bottles opening system commanded by a PLC. The unit is equipped with different containers and a retention system based on a cylinder, in order to allow the Robotic Arm Workstation "AE-BR" or the SCARA Arm Workstation "AE-SCA"...

AE-PLC-M

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-M

Stasiun Perakitan

The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality...

AE-PLC-AT

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-AT

Stasiun Pemasangan Sekrup Otomatis

The "AE-PLC-AT" is an automatic screw workstation commanded by a PLC that supply and mount four screws in a piece. The "AE-PLC-AT" keeps the screws in a vertical storage. The workstation take the screws, one by one, and a pneumatic manipulator...

AE-PLC-MEMB

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-MEMB

Stasiun Pembotolan

The "AE-PLC-MEMB" is a bottling workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-MEMB" transport the input bottles, to the filling area. In this zone, the "AE-PLC-MEMB" fills...

AE-PLC-MET

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-MET

Stasiun Pelabelan

The "AE-PLC-MET" is an automatic labelling machine commanded by a PLC. The "AE-PLC-MET" also include a transporting system that carries the incoming bottles to the labelling zone, supplying the bottles one by one.The "AE-PLC-MET" workstation is...

AE-PLC-ST

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-ST

Stasiun Pengeboran

The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.The "AE-PLC-ST"...

AE-PLC-SMOLD

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-SMOLD

Stasiun Pembentukan

The "AE-PLC-SMOLD" is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a molding process by punching the piece with...

AE-PLC-SCOR

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-SCOR

Stasiun Pemotongan

The "AE-PLC-SCOR" is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine simulate the process.The "AE-PLC-SCOR"...

CONTROL PROCESSES WORKSTATION - AE-PLC-CP

AE-PLC-CP

Available

6.2.5.2.- APLIKASI WORKSTATION PROSES

AE-PLC-CP

Stasiun Kontrol Proses

The "AE-PLC-CP" is a process control workstation commanded by a PLC that coordinates the work of 3 industrial controllers that regulates in parallel the level, flow rate, temperature and pressure processes. The "AE-PLC-CP" workstation has been...