14.1.- BIOMEKANIKA

Biomekanik mempelajari mekanisme pergerakan makhluk hidup, di antaranya gerakan tubuh manusia. Penelitian ini berkisar dari gerakan yang paling sederhana dalam kehidupan sehari-hari, seperti Kerja atau olah raga, hingga pergerakan beberapa organ dalam, seperti jantung. Untuk mempelajari kinetika tubuh manusia, biomekanik menerapkan prinsip mekanika dan pengetahuan tentang anatomi dan fisiologi, yang memungkinkan rancangan instrumen diagnostik dan perawatan baru serta pengembangan implan dan yang lebih baik prostesis desain.

Lihat Lebih Banyak

Saat ini, Biomekanik menganalisis gerakan kombinasi sendi dan otot. Analisis ini memungkinkan kita untuk mempelajari beban dan upaya yang dilakukan tubuh manusia. Pengetahuan tentang kinetika manusia memungkinkan perawatan cedera dan rehabilitasi selanjutnya, desain prostesis yang memungkinkan fleksibilitas gerakan, pencarian teknik olahraga baru untuk meningkatkan kinerja aktivitas fisik atau pencegahan kerusakan organisme saat melakukan aktivitas di tempat kerja dan di rumah. Pengetahuan ini dapat dibagi menjadi beberapa bidang Biomekanik: Biomekanik Medis, Biomekanik Olahraga dan Biomekanik Kerja. Aplikasi lain dari Biomekanik adalah desain aplikasi robotik. Gerakan yang dilakukan oleh lengan robot atau kapasitas perpindahan beberapa orang melalui sistem lokomotor elektro-mekanis didasarkan pada mekanisme makhluk hidup.

Studi berkelanjutan tentang perilaku mekanis organisme mengarahkan aplikasi biomekanik untuk mengembangkan prostesis bionik dan organisme buatan yang mensimulasikan fungsi normal organisme nyata dan dapat bereaksi terhadap rangsangan. Selain itu, peningkatan teknologi exoskeletons akan meningkatkan mobilitas orang-orang dengan mobilitas terbatas dan meningkatkan kapasitas fisik saat melakukan aktivitas yang berat.

Lihat Produk

BIOMEKANIKA PERALATAN

1.- FISIKA 2.- ELEKTRONIKA 3.- KOMUNIKASI 4.- LISTRIK 5.- ENERGI 6.- MEKATRONIK & OTOMASI 7.- MEKANIKA 8.- MEKANIKA FLUIDA 9.- TERMODINAMIK DAN TERMOTEKNIK 10.- PENGENDALIAN PROSES 11.- TEKNIK KIMIA 12.- TEKNOLOGI PANGAN & AIR 13.- LINGKUNGAN HIDUP 14.- TEKNIK BIOMEDIS AKSESORIS LABORATORIUM PABRIK PILOT SESUAI PESANAN
14.1.- BIOMEKANIKA 14.2.- ELEKTRONIK BIOMEDIS 14.3.- PERALATAN BIOMEDIS
14.1.1.- MECHANICS FUNDAMENTALS KITS 14.1.2.- MESIN SEDERHANA 14.1.3.- STATICS AND DYNAMICS 14.1.4.- GETARAN DAN OSILASI 14.1.5.- TRIBOLOGY (FRICTION, WEAR, LUBRICATION) 14.1.6.- MEKANIKA STRUKTURAL 14.1.7.- FOTOELASTISITAS DAN PENGUKURAN STRAIN 14.1.8.- UJI MEKANIK 14.1.9.- UJI TERMAL DAN AKUSTIK
14.1.2.1.- MEKANISME 14.1.2.2.- RODA GIGI
Menampilkan 91 -109 dari 109 produk
12 24 36
UNIT FOR DETERMINING THE GAUGE FACTOR OF STRAIN GAUGES - MFGE
  • MFGE
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN

MFGE

Peralatan untuk Penentuan Faktor Strain Gauge

The Unit for Determining the Gauge Factor of Strain Gauges, "MFGE", allows to determine the k factor of strain gauges.The bar rests on two supports with ball bearings, so that it is possible to work with a load under pure bending.To perform such...
Lihat Unit
STRAIN GAUGE TRAINING UNIT - MEGE
  • MEGE
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN

MEGE

Peralatan Pelatihan Strain Gauge

The Strain Gauge Training Unit, "MEGE", provides an introduction to the fundamentals of measurement with strain gauges, to compare how resistance strain gauges work and how they measure strains in different structures (torsion, tension and bending...
Lihat Unit
PHOTOELASTIC STRESS DEMONSTRATION UNIT - PSD
  • PSD
Available
7.3.1.- FOTOELASTISITAS DAN PENGUKURAN STRAIN

PSD

Peralatan Demonstrasi Fotoelastis Tegangan

The Photoelastic Stress Demonstration Unit, "PSD", consists of a frame on which the test specimens are placed. The specimens are made of a special transparent material that has a double optical refraction effect under the action of a mechanical...
Lihat Unit
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- UJI MEKANIK

EEU/20KN

Peralatan Uji Material Universal

The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...
Lihat Unit
BRINELL HARDNESS TESTING UNIT - EEDB
  • EEDB
Available
7.3.2.1.- UJI MEKANIK

EEDB

Peralatan Uji Kekerasan "Brinell"

The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...
Lihat Unit
CREEP TESTING UNIT - EEFCR
  • EEFCR
Available
7.3.2.1.- UJI MEKANIK

EEFCR

Peralatan Uji Fluensi "Creep"

The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...
Lihat Unit
COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC
  • EEFC
Available
7.3.2.1.- UJI MEKANIK

EEFC

Peralatan Uji Kelelahan, Dikendalikan dari Komputer (PC)

The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...
Lihat Unit
FATIGUE TESTING UNIT - EEF
  • EEF
Available
7.3.2.1.- UJI MEKANIK

EEF

Peralatan Uji Kelelahan

The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...
Lihat Unit
CHARPY AND IZOD IMPACT TESTING UNIT - EEICI
  • EEICI
Available
7.3.2.1.- UJI MEKANIK

EEICI

Peralatan Uji Impak Charpy dan Izod

The Charpy and Izod Impact Testing Unit, "EEICI", consists of a pendulum supported on bearings with an arm of 330 mm long and a fastening system in the initial position of the test. The suitable hammer either for Charpy or Izod test is screwed to...
Lihat Unit
EULER BUCKLING MODES UNIT - MEBM
  • MEBM
Available
7.3.2.1.- UJI MEKANIK

MEBM

Peralatan Modus Tekuk Euler

With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
Lihat Unit
TORSION AND BEND UNIT - MTP
  • MTP
Available
7.3.2.1.- UJI MEKANIK

MTP

Peralatan Torsi dan Lentur

The Torsion and Bend Unit, "MTP", is a combined apparatus for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate its transport...
Lihat Unit
TORSION UNIT - MTB
  • MTB
Available
7.3.2.1.- UJI MEKANIK

MTB

Peralatan Torsi

The Torsion Unit, "MTB", allows to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a metallic rod is fastened by...
Lihat Unit
TORSION TEST UNIT (30NM) - MTT
  • MTT
Available
7.3.2.1.- UJI MEKANIK

MTT

Peralatan Uji Torsi (30Nm)

To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...
Lihat Unit
TENSILE TESTER UNIT - MTTU
  • MTTU
Available
7.3.2.1.- UJI MEKANIK

MTTU

Peralatan Uji Tarik

With the Tensile Tester Unit, "MTTU", tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different...
Lihat Unit
Meminta informasi