Terlaris
Menampilkan 841 -870 dari 909 produk
12 24 36
PUMP SYSTEM (PRESSURE) - N-EM-SBP
  • N-EM-SBP
Available
6.2.2.2.- TINGKAT DAN KONTROL ALIRAN
N-EM-SBP
Sistem Pemompaan (tekanan)
The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...
Lihat Unit
AUTOMATIC FILLING SYSTEM - N-EM-SALL
  • N-EM-SALL
Available
6.2.2.2.- TINGKAT DAN KONTROL ALIRAN
N-EM-SALL
Sistem Pengisian Otomatis
The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...
Lihat Unit
DEPRESSION MEASUREMENT SYSTEM (VACUUM GAUGE) - FME26
  • FME26
Available
8.1.2.- PENGUKURAN
FME26
Sistem Pengukur Depresi (vacuum gauge)
The Depression Measurement System (vacuum gauge), "FME 26", is designed to be connected to the inlet of some flow aspiration system, in a way that we could measure the depression made by the so-called aspiration system. Such system will be...
Lihat Unit
BASIC HYDRAULIC FEED SYSTEM - FME00/B
  • FME00/B
Available
8.1.1.- UNIT DASAR
FME00/B
Sistem Pengumpan Hidrolik Dasar
The Basic Hydraulic Feed System, "FME00/B", designed by EDIBON is a service unit for different Fluid Mechanics Units as: "FME" type modules, Fluid Friction in Pipes Unit "AFT", etc., increasing the equipment profitability.
Lihat Unit
FINAL USER SMART GRID SYSTEM - AEL-FUSG
  • AEL-FUSG
Available
5.1.2.- SMART GRIDS DAN SISTEM DAYA (PENGGUNA AKHIR)
AEL-FUSG
Sistem Smart Grid (Pengguna Akhir)
What is a Smart Grid? A smart grid is an electrical grid that uses information and communications technology to gather and act on information about the behaviours of suppliers and consumers, in an automated fashion to improve the efficiency,...
Lihat Unit
COMPUTER CONTROLLED COUPLED TANKS SYSTEM - CTAC
  • CTAC
Available
6.1.1.3.- APLIKASI SISTEM INDUSTRI
CTAC
Sistem Tangki Terkait yang Dikendalikan melalui Komputer (PC)
The Computer Controlled Coupled Tanks System, "CTAC", consists of four transparent tanks, each with a pressure sensor to measure the water level.The coupling configuration between tanks can be modified by the use of computer controlled solenoid...
Lihat Unit
FINAL USER SMART GRID - SMART ENERGY APPLICATION - AEL-FUSG-E
Available
5.1.2.- SMART GRIDS DAN SISTEM DAYA (PENGGUNA AKHIR)
AEL-FUSG-E
Smart Grid (Pengguna Akhir) - Aplikasi Manajemen Energi
Aksesori dari AEL-FUSG
Final User Smart Grid - Smart Energy Application, "AEL-FUSG-E", is a trainer that reflects the real operation of actual Home Energy Management Systems. The purpose of the "AEL-FUSG-E" trainer is to make the user understand how smart devices work...
Lihat Unit
FINAL USER SMART GRID - NET METERING APPLICATION - AEL-FUSG-N
Available
5.1.2.- SMART GRIDS DAN SISTEM DAYA (PENGGUNA AKHIR)
AEL-FUSG-N
Smart Grid (Pengguna Akhir) - Aplikasi Net Metering
Aksesori dari AEL-FUSG
The AEL-FUSG-N is a trainer that reflects actual operations about Net-Metering, auto-consumption and electricity selling. For that purpose, this trainer has a synchronous generator that simulates a wind turbine.The wind turbine will be controlled...
Lihat Unit
FINAL USER SMART GRID - SMART METER APPLICATION - AEL-FUSG-M
Available
5.1.2.- SMART GRIDS DAN SISTEM DAYA (PENGGUNA AKHIR)
AEL-FUSG-M
Smart Grid (Pengguna Akhir) - Aplikasi Smart Meter
Aksesori dari AEL-FUSG
Nowadays, the main goal of all major electric utilities is to achieve a perfect synchronization between power generation and consumption. For that purpose, some activities, such as real-time remote management and monitoring of the energy...
Lihat Unit
INDUSTRIAL PROCESSES CONTROL WORKSTATION - AE-PLC-CPI
  • AE-PLC-CPI
Available
6.2.4.- APLIKASI INDUSTRI DENGAN PLC
AE-PLC-CPI
Stasiun Kontrol Proses Industri
The "AE-PLC-CPI" application is a unit that includes different technologies to carry out four control loops in closed loop: flow, level, temperature and pressure. A flexible system of ball valves and pipe connections makes the configuration of the...
Lihat Unit
ROBOTIC ARM WORKSTATION - AE-BR
  • AE-BR
Available
6.2.5.5.- APLIKASI WORKSTATION ROBOTIC
AE-BR
Stasiun Lengan Robot
The "AE-BR" is a robotic arm workstation with the programming console included. The robotic arm can command the pneumatic gripper or the electrical driller installed in it.The "AE-BR" workstation is able to perform a lot of functions including:...
Lihat Unit
PIECES FEEDER WORKSTATION - AE-PLC-APS
  • AE-PLC-APS
Available
6.2.5.1.- APLIKASI WORKSTATION PARTS FEED
AE-PLC-APS
Stasiun Pemberi Makan Bagian
The Pieces Feeder Workstation, "AE-PLC-APS", is a unit that works with pneumatics and electro-pneumatics technologies.The function of the "AE-PLC-APS" is to supply pieces and to verify them, if they are acceptable.The pieces will be supplied one...
Lihat Unit
BOTTLING WORKSTATION - AE-PLC-MEMB
  • AE-PLC-MEMB
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-MEMB
Stasiun Pembotolan
The "AE-PLC-MEMB" is a bottling workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-MEMB" transport the input bottles, to the filling area. In this zone, the "AE-PLC-MEMB" fills...
Lihat Unit
PNEUMATIC HANDLING AND CONVEYOR BELT - AE-PLC-MACT
  • AE-PLC-MACT
Available
6.2.5.4.- BAGIAN PENANGANAN APLIKASI WORKSTATION
AE-PLC-MACT
Stasiun Penanganan Pneumatik dan Sabuk Konveyor
The Pneumatic Handling and Conveyor Belt, "AE-PLC-MACT", is an automatic handling station with a conveyor system commanded by a PLC. The "AE-PLC-MACT" is composed of a pneumatic handling system that uses vacuum technology to move pieces from the...
Lihat Unit
DRILLING WORKSTATION - AE-PLC-ST
  • AE-PLC-ST
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-ST
Stasiun Pengeboran
The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.The "AE-PLC-ST"...
Lihat Unit
MOUNTING WORKSTATION - AE-PLC-M
  • AE-PLC-M
Available
6.2.5.2.- APLIKASI WORKSTATION PROSES
AE-PLC-M
Stasiun Perakitan
The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality...
Lihat Unit
COMPUTER CONTROLLED STEAM STERILIZER - BIEV
  • BIEV
Available
14.3.- PERALATAN BIOMEDIS
BIEV
Sterilisator Uap, Dikendalikan dari Komputer (PC)
The Computer Controlled Steam Sterilization, "BIEV", is a real unit used in many medical and research centers for the correct sterilization of the typical instruments used, avoiding possible contaminating effects produced by infectious...
Lihat Unit
GEARED STUDY - MESE-T
  • MESE-T
Available
7.1.2.2.- RODA GIGI
MESE-T
Studi Roda Gigi
The Geared Study Drive Unit, "MESE", has been designed by EDIBON to dynamic study of different gears, including a standard three shaft gear train for study, which can be modified with a simple setting to obtain a simple transmission.For the...
Lihat Unit
STATIC PITOT TUBE - FME32
  • FME32
Available
8.1.2.- PENGUKURAN
FME32
Tabung Statis Pitot
The Static Pitot Tube, "FME32", designed by EDIBON, the change in flow speed within a tube can be determined.The Pitot static tube can be moved across the whole cross-section of the tube, and thus to measure the pressure profile.This tube is...
Lihat Unit
DRAINAGE AND SEEPAGE TANK - PDFD
  • PDFD
Available
11.1.11.- FILTRASI, SEDIMENTASI, DAN PENCAMPURAN
PDFD
Tangki Filtrasi dan Drainase
The Drainage and Seepage Tank, "PDFD", unit has been designed for the practical demonstration, visualization and experimental study of the flow through permeable media and flows in subsoil.The "PDFD" unit basically consist of a tank (soils...
Lihat Unit
COMPUTER CONTROLLED DRAINAGE AND SEEPAGE TANK - PDFDC
  • PDFDC
Available
11.1.11.- FILTRASI, SEDIMENTASI, DAN PENCAMPURAN
PDFDC
Tangki Filtrasi dan Drainase, Dikendalikan dari Komputer (PC)
The Computer Controlled Drainage and Seepage Tank, "PDFDC", has been designed by EDIBON for the practical demonstration, visualization and experimental study of the flow through permeable media and flows in subsoil.The "PDFDC" basically consist of...
Lihat Unit
SOIL/WATER MODEL TANK - PTSA
  • PTSA
Available
13.1.- HIDROLOGI DAN HIDROGEOLOGI
PTSA
Tangki Pemodelan Tanah/Air
The Soil/Water Model Tank "PTSA" is a laboratory scale unit designed to study the most common surface irrigation systems, as well as to investigate the surface and sub-surface effects of applying water. The "PTSA" unit is mounted on a movable...
Lihat Unit
SEDIMENTATION TANK - PDS
  • PDS
Available
11.1.11.- FILTRASI, SEDIMENTASI, DAN PENCAMPURAN
PDS
Tangki Sedimentasi
The Sedimentation Tank, "PDS", is a teaching unit, designed by EDIBON, to demonstrate the sedimentation process and to familiarize with the settling principle of discrete particles settling into a tank. It will also allow to study the hydraulic...
Lihat Unit
HYDROSTATIC PRESSURE - FME08
  • FME08
Available
8.1.3.- HIDROSTATIS
FME08
Tekanan Hidrostatik
The Surface Pressure Unit, "FME08", designed by EDIBON, allows to study the center of pressures with a partially or totally submerged quadrant.This unit consists of a quadrant mounted on the arm of a balance that pivots around an axis.When the...
Lihat Unit
AERODYNAMIC TUNNEL FLIGHT DEMONSTRATION UNIT - TADV225/450
  • TADV225/450
Available
8.6.- AERODINAMIKA
TADV225/450
Terowongan Aerodinamis untuk Demonstrasi Penerbangan
The Aerodynamic Tunnel for Flight Demonstration, "TADV225/450", designed by EDIBON, consists of an open wind tunnel in whose working section the model of an aircraft with fixed wings is located. The aircraft is piloted by the user using controls...
Lihat Unit
AERODYNAMIC TUNNEL FOR FLOW VISUALIZATION - TAVF180/100
  • TAVF180/100
Available
8.4.- VISUALISASI ALIRAN
TAVF180/100
Terowongan Aerodinamis untuk Visualisasi Aliran
The Flow Visualization Aerodynamic Tunnel, "TAVF180/100", designed by EDIBON, consists of a vertical conduction in which an upward flow of air and smoke is induced, which passes through different models allowing to study the behavior of the flow...
Lihat Unit
AERODYNAMIC TUNNEL, 300 X 300 MM - TA300/300
  • TA300/300
Available
8.6.- AERODINAMIKA
TA300/300
Terowongan Aerodinamis, 300X300 mm
The Aerodynamic Tunnel, 300 x 300 mm, "TA300/300", is a wind tunnel designed to study subsonic aerodynamics in a tunnel in open circuit and with incompressible subsonic flow. Air is drawn by a variable speed fan located at the discharge end of the...
Lihat Unit
Meminta informasi