9.10.- PEMASANGAN DAN PEMELIHARAAN

Kebutuhan masyarakat saat ini adalah tantangan bagi industri apa pun, karena mereka harus terus melakukan evolusi dan pembaruan untuk beradaptasi dengan kebutuhan tersebut.

Lihat Lebih Banyak

Dalam beberapa tahun terakhir, sebagai akibat dari revolusi industri atau Industri 4.0 baru, munculnya Industrial Internet of Things (IIoT) dan Pabrik Cerdas, adaptasi tersebut dimungkinkan berkat penerapan teknik paling canggih dalam desain fasilitas baru atau dalam renovasi dari yang sudah ada.

Terlepas dari semua kemajuan teknologi dan kontrol menyeluruh yang dilakukan, tidak boleh dilupakan bahwa setiap elemen yang mengambil bagian dalam proses produktif akan menjadi mengalami keausan mekanis dan listrik (tenaga, beban, dll.) dan masa pakainya terbatas. Untuk menghindari kegagalan katastropik, penghentian produksi atau semua jenis proses yang menyiratkan peningkatan waktu non-produktif dan, oleh karena itu, peningkatan biaya, sangatlah penting untuk melakukan pemeliharaanmesin, sistem kelistrikan, dll.

Biasanya, hanya dua jenis pemeliharaan yang dipertimbangkan:

  • Korektif: masalah diselesaikan setelah terjadi.
  • Pencegahan: peninjauan berkala terhadap semua elemen bermasalah tersebut dan penggantinya jika diperlukan.

Jenis pemeliharaan ini melibatkan biaya yang sangat tinggi dan tidak perlu dalam banyak kasus. Saat ini, berkat teknologi yang tersedia, dimungkinkan untuk melakukan pemeliharaan prediktif yang terdiri dari analisis komprehensif dari semua variabel yang berperan dalam semua komponen sistem dan dapat menggantinya pada waktu yang tepat.

Namun, jika lebih banyak kontrol atas kegagalan yang dapat menyebabkan semua komponen mekanis yang dapat aus lebih disukai, ada jenis pemeliharaan lain, yang dikenal sebagai pemeliharaan proaktif. Ini selangkah lebih maju daripada pemeliharaan prediktif, mencari akar masalahnya.

Lihat Produk
Materi Terkait

PEMASANGAN DAN PEMELIHARAAN PERALATAN

1.- FISIKA 2.- ELEKTRONIKA 3.- KOMUNIKASI 4.- LISTRIK 5.- ENERGI 6.- MEKATRONIK & OTOMASI 7.- MEKANIKA 8.- MEKANIKA FLUIDA 9.- TERMODINAMIK DAN TERMOTEKNIK 10.- PENGENDALIAN PROSES 11.- TEKNIK KIMIA 12.- TEKNOLOGI PANGAN & AIR 13.- LINGKUNGAN HIDUP 14.- TEKNIK BIOMEDIS AKSESORIS LABORATORIUM PABRIK PILOT SESUAI PESANAN
9.1.- FUNDAMENTAL DAN KONSEP DASAR TERMODINAMIKA 9.2.- PEMANASAN, VENTILASI, AC DAN AIR PANAS 9.3.- POMPA PANAS 9.4.- PENDINGINAN 9.5.- SISTEM PIPA HIDROLIK TERMAL 9.6.- PERPINDAHAN PANAS 9.7.- PENUKAR PANAS 9.8.- MESIN TERMAL 9.9.- MESIN PEMBAKARAN INTERNAL 9.10.- PEMASANGAN DAN PEMELIHARAAN
9.10.1.- MODEL BAGIAN 9.10.2.- MODEL YANG DAPAT DILEPASKAN 9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN
Menampilkan 1 -30 dari 37 produk
12 24 36
UNIT TO STUDY A FILTER DRIER CUTAWAY MODEL - DFCM
  • DFCM
Available
9.10.1.- MODEL BAGIAN

DFCM

Peralatan Model Potongan Filter Pengering

The Unit to Study a Filter Drier Cutaway Model, "DFCM", allows the students to visualize the inner parts of a (element), to evaluate the relation with each other accurately and to understand their functionThe cutaway model of a filter drier is...
Lihat Unit
UNIT TO STUDY A GAS METER CUTAWAY MODEL - GMCM
  • GMCM
Available
9.10.1.- MODEL BAGIAN

GMCM

Peralatan Model Potongan Penghitung Gas

The Unit to Study a Gas Meter Cutaway Model, "GMCM", allows the students to visualize the inner parts of a gas meter, to evaluate the relation with each other accurately and to understand their function.It is a measurement device to determine the...
Lihat Unit
UNIT TO STUDY A HERMETIC REFRIGERANT COMPRESSOR CUTAWAY MODEL - HCCM
  • HCCM
Available
9.10.1.- MODEL BAGIAN

HCCM

Peralatan Model Potongan Kompresor Pendingin Hermetik

The Unit to Study a Hermetic Refrigerant Compressor Cutaway Model, "HCCM", allows the students to visualize the inner parts of a compressor, to evaluate the relation with each other accurately and to understand their function.In the hermetic...
Lihat Unit
UNIT TO STUDY A HELICAL OIL SEPARATOR CUTAWAY MODEL - HOSCM
  • HOSCM
Available
9.10.1.- MODEL BAGIAN

HOSCM

Peralatan Model Terpotong Separator Oli Heliks

The Unit to Study a Helical Oil Separator Cutaway Model, "HOSCM", allows the students to visualize the inner parts of a liquid separator, to evaluate the relation with each other accurately and to understand their function.It is a real model used...
Lihat Unit
UNIT TO STUDY A LIQUID SEPARATOR CUTAWAY MODEL - LSCM
  • LSCM
Available
9.10.1.- MODEL BAGIAN

LSCM

Peralatan Model Terpotong Separator Cairan

The Unit to Study a Liquid Separator Cutaway Model, "LSCM", designed by EDIBON, allows the students to visualize the inner parts of a liquid separator, to evaluate the relation with each other accurately and to understand their function.The...
Lihat Unit
UNIT TO STUDY AN OPEN REFRIGERANT COMPRESSOR CUTAWAY MODEL - OCCM
  • OCCM
Available
9.10.1.- MODEL BAGIAN

OCCM

Peralatan Model Terpotong Kompresor Refrigeran Terbuka

The Unit to Study an Open Refrigerant Compressor Cutaway Model, "HCCM", allows the students to visualize the inner parts of an open compressor, to evaluate the relation with each other accurately and to understand their function.This unit allows...
Lihat Unit
INTRODUCTION TO REFRIGERATION UNIT - TIR
  • TIR
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TIR

Peralatan Pengenalan ke Sistem Refrigerasi

The Introduction to Refrigeration Unit, "TIR", is a unit with exchangeable sets in which the components are mounted on plates and quickly connected by flexible hoses.The unit consists of a frame with a compressor, a refrigerant accumulator tank to...
Lihat Unit
TEMPERATURE MEASUREMENT TRAINING UNIT - TEMT
  • TEMT
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TEMT

Peralatan Pelatihan Pengukuran Suhu

The Temperature Measurement Training Unit, "TEMT", allows to compare the response of several devices to measure the temperature for different flows and different installation position of these devices.The unit includes four different measuring...
Lihat Unit
ASSEMBLY AND MAINTENANCE IN REFRIGERATION SYSTEMS UNIT - TAMR
  • TAMR
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TAMR

Peralatan Pemasangan dan Pemeliharaan pada Instalasi Refrigerasi

The Assembly and Maintenance in Refrigeration Systems Unit, "TAMR", has been designed to teach the students the planning, implementation and checking of processes related to the assembly, startup and maintenance of refrigeration systems.The fully...
Lihat Unit
HOME REFRIGERATION MODEL - TRAMC/1
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TRAMC/1

Model Kulkas Rumah Tangga

Aksesori dari TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
Lihat Unit
SIMPLE AIR CONDITIONING SYSTEM MODEL FOR ROOM COOLING - TRAMC/3
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TRAMC/3

Model Instalasi AC Sederhana untuk Pendinginan Ruangan

Aksesori dari TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below. The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
Lihat Unit
COMPLETE AIR CONDITIONING SYSTEM MODEL - TRAMC/4
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TRAMC/4

Model Klimatisasi Lengkap

Aksesori dari TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
Lihat Unit
MEASUREMENT AND REGULATION STATION TRAINER - MRST
  • MRST
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

MRST

Peralatan Eksperimen Stasiun Regulasi dan Pengukuran

The Measurement and Regulation Station Trainer,"MRST", designed by EDIBON is a totally accessible bench-top unit.The unit works with an air compressor that simulates the gas flowing inside the pipes (air testing), allowing to check the tightness...
Lihat Unit
INSTANTANEOUS GAS HEATER TRAINER - IGHT
  • IGHT
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

IGHT

Peralatan Eksperimen Pemanas Gas Instan

The Instantaneous Gas Heater Trainer, ,IGHT,, designed by EDIBON, is a training unit with wheels to facilitate its mobility that represents a gas heater training system. The unit operates with air, simulating the operation of the heater, so it can...
Lihat Unit
FORCED AIR GAS BURNER TRAINER - GBT
  • GBT
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

GBT

Peralatan Eksperimen dengan Pembakar Gas Pembakaran Paksa

The Forced Air Gas Burner Trainer, "GBT", designed by EDIBON, is a compact teaching unit with wheels to facilitate its mobility. It represents a controlled gas system that supplies a forced air gas burner. It allows the study of the arrangement,...
Lihat Unit
GAS HOME SUPPLY TRAINER - GHST
  • GHST
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

GHST

Peralatan Eksperimen Pasokan Gas Rumah Tangga

The Gas Home Supply Trainer, ,GHST,, designed by EDIBON, consists of a teaching unit where the elements normally used on any domestic gas installation are arranged on the front panel of the unit as in a real installation.The unit works with air,...
Lihat Unit
ELECTRICAL INSTALLATIONS IN REFRIGERATION SYSTEMS UNIT - TEIR
  • TEIR
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TEIR

Peralatan Instalasi Listrik pada Sistem Refrigerasi

For this purpose this unit has been designed to teach the students about different circuits and electrical devices associated with the refrigeration field, how to carry out the wirings of these types of installations, how the refrigeration...
Lihat Unit
ELECTRICAL CONNECTION OF REFRIGERANT COMPRESSORS UNIT - TECR
  • TECR
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TECR

Peralatan Sambungan Listrik untuk Kompresor Refrigeran

The Electrical Connection of Refrigerant Compressors Unit, "TECR", includes the electrical elements required for the start and operation of a refrigerant compressor and the necessary safety elements, arranged on a panel in a clear and visible way,...
Lihat Unit
ELECTRICAL FAULTS IN AIR CONDITIONING SYSTEMS UNIT - TEFA
  • TEFA
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TEFA

Peralatan Kerusakan Listrik pada Instalasi AC

The Electrical Faults in Air Conditioning Systems Unit,"TEFA", is designed in a simple way in order to transmit comprehensible knowledge about how identify electrical faults in air conditioning systems. For this purpose, concepts are included to...
Lihat Unit
HYDRONIC BALANCING TRAINING UNIT - THBT
  • THBT
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

THBT

Peralatan Pelatihan untuk Penyeimbangan Hidraulik Radiator

The Hydraulic Radiator Balancing Training Unit, "THBT", allows the study of the amount of water with which to guarantee that all the radiators of an installation are supplied with sufficient hot water.The hydraulic balancing is carried out by...
Lihat Unit
RADIATORS TRAINING UNIT - RT
  • RT
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

RT

Peralatan Pelatihan dengan Radiator

The Radiators Training Unit, "RT", has been designed to study hot water heating systems. These systems are called that way because they use water as working fluid between the generation system, usually a boiler, and the emitters, such as...
Lihat Unit
HEATING SYSTEM TRAINING UNIT - THST
  • THST
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

THST

Peralatan Pelatihan Sistem Pemanas

The Heating System Training Unit, "THST", has been designed to study central heating systems. The unit simulates a central heating system. For that purpose, it is made up of four radiators with a thermostatic valve each. This valve controls the...
Lihat Unit
THREE-WAY MIXING VALVE TRAINING UNIT - TEV3V
  • TEV3V
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TEV3V

Peralatan Pelatihan Katup Pencampur 3 Arah

The Three-Way Mixing Valve Training Unit, "TEV3V", allows to demonstrate the function of a three-way mixing valve in a hot water heating system. The three-way mixing valve in the heating system regulates the supply water temperature to a heating...
Lihat Unit
FOUR-WAY MIXING VALVE TRAINING UNIT - TEV4V
  • TEV4V
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TEV4V

Peralatan Pelatihan Katup Pencampur 4 Arah

The Four-Way Mixing Valve Training Unit, "TEV4V", allows to demonstrate the function of a four-way mixing valve in a hot water heating system. The four-way mixing valve in the heating system regulates the circulation and feed flow temperatures of...
Lihat Unit
SANITARY FITTINGS TRAINING UNIT - TEIS
  • TEIS
Available
9.10.3.- PRAKTIK INSTALASI DAN PEMELIHARAAN

TEIS

Peralatan Pelatihan Aksesori Sanitasi

The Sanitary Fittings Training Unit, "TEIS", has been designed by EDIBON for training in the plumbing sector. It consists of an anodized aluminum frame and panels in painted steel in which tests can be carried out with the most common systems of...
Lihat Unit
Meminta informasi