7.3.2.1.- 機械的試験

機械的試験 UNITS

1-17 を表示中 合計 17 商品
UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN
  • EEU/20KN
Available
7.3.2.1.- 機械的試験

EEU/20KN

ユニバーサル素材試験装置

The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...
BRINELL HARDNESS TESTING UNIT - EEDB
  • EEDB
Available
7.3.2.1.- 機械的試験

EEDB

ブリネル硬さ試験装置

The Brinell Hardness Testing Unit, "EEDB", is a hardness tester that determines Brinell hardness in metals, hard alloys, tempered steels, etc. Besides, it can be used with other materials, such as rigid plastics, bakelite, etc.A penetrating ball...
CREEP TESTING UNIT - EEFCR
  • EEFCR
Available
7.3.2.1.- 機械的試験

EEFCR

クリープ試験装置

The Creep Testing Unit, "EEFCR", for the creep testing is mounted on a structure of aluminum profiles which a painted steel panel is supported on.The "EEFCR" unit is designed to carry out experiments on specimens of plastic materials. Due to the...
COMPUTER CONTROLLED FATIGUE TESTING UNIT - EEFC
  • EEFC
Available
7.3.2.1.- 機械的試験

EEFC

コンピューター制御疲労試験装置

The Computer Controlled Fatigue Testing Unit, "EEFC", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional...
FATIGUE TESTING UNIT - EEF
  • EEF
Available
7.3.2.1.- 機械的試験

EEF

疲労試験装置

The Fatigue Testing Unit, "EEF", designed by EDIBON, allows to study the fatigue strength of the materials. For that purpose, fatigue tests are performed with different materials and notches.Optionally, with the additional recommended element Set...
STRUT BUCKLING UNIT - MFLT
  • MFLT
Available
7.3.2.1.- 機械的試験

MFLT

棒鋼の座屈を研究する機械

The Strut Buckling Unit "MFLT" allows the student to obtain experimentally the buckling critical load of slender struts subjected to compression.The unit allows to study the buckling of pieces of different lengths, ranging from 300 mm. to 625 mm.,...
EULER BUCKLING MODES UNIT - MEBM
  • MEBM
Available
7.3.2.1.- 機械的試験

MEBM

Euler Buckling Modes Unit

With the Euler Buckling Modes Unit, "MEBM", the four Euler buckling cases are demonstrated, for which four elastic bars are fixed or supported in a frame and subjected to compression load with a system of weights.The elastic bars can be free or...
TORSION AND BEND UNIT - MTP
  • MTP
Available
7.3.2.1.- 機械的試験

MTP

ねじり曲げ実験装置

The Torsion and Bend Unit, "MTP", is a combined apparatus for the demonstration of both torsion and bend to be used in the laboratory or as a complement of the theoretical study about torsion and bend. Its size and weight facilitate its transport...
TORSION UNIT - MTB
  • MTB
Available
7.3.2.1.- 機械的試験

MTB

トーション実験装置

The Torsion Unit, "MTB", allows to verify the basis of torsion and to perform practical exercises to demonstrate:Circular rods elastic torsion equation.The rigidity modulus of different materials.To perform the tests a metallic rod is fastened by...
TORSION TEST UNIT (30NM) - MTT
  • MTT
Available
7.3.2.1.- 機械的試験

MTT

Torsion Test Unit (30Nm)

To perform the tests, the test specimen is clamped and twisted by means of a flywheel and a worm gear until it breaks. The force is gradually applied to the specimen to observe the elastic strain produced. The specimen will deform and manifest...
TENSILE TESTER UNIT - MTTU
  • MTTU
Available
7.3.2.1.- 機械的試験

MTTU

Tensile Tester Unit

With the Tensile Tester Unit, "MTTU", tensile test can be performed. A specimen made of different materials is subjected to an increasing axial tensile stress till failure. This unit allows the user to perform tensile tests with different...
DEFLECTION OF CURVED BARS UNIT - MDB
  • MDB
Available
7.3.2.1.- 機械的試験

MDB

湾曲棒たわみ実験装置

The Deflection of Curved Bars Unit "MDB" consists of a structure of aluminum and steel that allows the incorporation of different curved bars to be studied. It allows tests with curved bars of different shape.The use of two dial gauges placed...
BEAM DEFLECTION UNIT - MFV
  • MFV
Available
7.3.2.1.- 機械的試験

MFV

梁たわみ実験装置

The Beam Deflection Unit, "MFV" has been designed to enable the students to observe and study the following phenomena in simply supported beams and cantilever beams:Relation between the deflections and the applied loads.Effect of the length and...
リクエスト情報