MDU-SCM クランク機構セット

7.4.3.- 設置および保守の慣行

革新的なシステム

The Set of Crank Mechanism, "MDU-SCM", allows to adjust the stroke, mass compensation and bearing clearance, as well as the speed, to simulate vibrations.

一般的な説明を表示

カタログ

コンテストの仕様

概要

The compressors and pumps frequently use crank and connecting rod mechanisms. The force and mass oscillations cause vibrations in the units.

The Set of Crank Mechanism, "MDU-SCM", allows to adjust the stroke, mass compensation and bearing clearance, as well as the speed, to simulate vibrations.

The load is exerted by springs.

When you want to simulate the force obtained by a gas compression, a higher torque is required, for which it is recommended to use the Set of Belt Drive, "MDU-SBD", or the Set to Study Damage in Gears, "MDU-SSDG".

必要なアイテム

補完的な機器

UNIT TO STUDY THE ALIGNMENT OF DRIVES, SHAFTS AND GEARS - ADSG

ADSG

Available

7.4.3.- 設置および保守の慣行

ADSG

ドライブ、シャフト、ギアのアライメント装置

The Drive, Shaft, and Gear Alignment Unit, "ADSG", allows for studying the coupling and uncoupling, maintenance, repair of the related units and checking the operation with the following units:CGA. Combined Gear Assembly Unit.SGA. Spur Gear...

COMPUTER CONTROLLED MACHINE DIAGNOSIS UNIT - MDUC

MDUC

Available

7.4.3.- 設置および保守の慣行

MDUC

コンピュータ制御の機械診断装置

The Computer Controlled Machine Diagnosis Unit, "MDUC", of EDIBON, allows you to perform vibration measurement practical exercises, measuring the displacement, velocity and acceleration of vibrations in the time-frequency range.The Computer...

Available

7.4.3.- 設置および保守の慣行

MDU

機械診断

The family of Machine Diagnosis Unit, "MDU", of Edibon, allows you to perform vibration measurement practical exercises, measuring the displacement, velocity and acceleration of vibrations in the time-frequency range.The MDU Base Unit, "MDU-UB",...

MDU-MLB

Available

7.4.3.- 設置および保守の慣行

MDU-MLB

MDU機器の移動構造

The Mobile Structure for MDU, "MDU-MLB", is a robust structure designed to quickly and easily assemble the various elements of the MDU Base Unit, "MDU-UB" or the Computer Controlled Machine Diagnosis Unit, "MDUC", and thus assemble a mobile test...

MDU-SM

Available

7.4.3.- 設置および保守の慣行

MDU-SM

MDU機器のデスクトップ構造

A bench-top structure consisting of a slotted table with anodized aluminum frames of 1100 x 770 x 820 mm.It has a transparent protective cover that protects against the rotating parts and allows us to observe the different experiments. The cover...

SOFTWARE, SENSORS AND CONTROL FOR MDU UNIT - MDU-SSC

MDU-SSC

Available

7.4.3.- 設置および保守の慣行

MDU-SSC

MDU機器のソフトウェア、センサー、制御

The aim of the vibration analyzer is to assess the machine diagnosis testing with the different kits related to the vibration interface technology.The system consists of two acceleration sensors, a speed sensor, a measuring amplifier with...

MDU-BLU

Available

7.4.3.- 設置および保守の慣行

MDU-BLU

ブレーキと負荷装置

The Break and Load Unit, "MDU-BLU", of EDIBON is a magnetic particle brake, a display unit and an electrical control. It is possible to precisely adjust the braking moment. The excitation current is used as a measurement of the braking moment and...

MDU-SES

Available

7.4.3.- 設置および保守の慣行

MDU-SES

弾性ツリーセット

The Set of Elastic Shaft, "MDU-SES", of EDIBON allows to study the behavior of an elastic rotor subjected to imbalance and balance of elastic rotors in operation. It is possible to study the resonance and the phenomena occurred in subcritical and...

SET OF ROTATING SHAFT WITH CRANK - MDU-SRS

MDU-SRS

Available

7.4.3.- 設置および保守の慣行

MDU-SRS

クラック入り軸セット

It is important that fissures resulting from material fatigue in rotating machines are detected in good time before the breakage occurs, which usually leads to fatal consequences.The Set of Rotating Shaft with Crank, "MDU-SRS", consists of two...

SET OF ROLLER BEARINGS WITH FAULTS - MDU-SRBF

MDU-SRBF

Available

7.4.3.- 設置および保守の慣行

MDU-SRBF

ベアリング欠陥セット

To determine the remaining life cycle of a roller bearing and decide on its replacement, the slow variation of the vibration spectrum is analyzed. The spectral distribution will enable to draw accurate conclusions about the type of defect and its...

MDU-SCO

Available

7.4.3.- 設置および保守の慣行

MDU-SCO

カップリングセット

The Set of Couplings, "MDU-SCO", allows to compare the properties of different couplings such as curved tooth, bolt, flange and claw couplings.The vibrational behavior of the different types of couplings is important to draw conclusions about...

MDU-SBD

Available

7.4.3.- 設置および保守の慣行

MDU-SBD

ベルトトランスミッションセット

The belt drives are noiseless drive devices, have a long life and require little maintenance provided that its design, assembly and adjustment are correct.The Set of Belt Drive, "MDU-SBD", allows to study the conditions that cause vibrations or...

品質

アフターサービス

その他の情報については, お問い合わせください

MDU-SCM クランク機構セット

革新的なシステム

関連ニュース

概要

必要なアイテム

補完的な機器

品質

アフターサービス