Are you a teacher or do you work as an engineering researcher? EDIBON offers courses for teachers and #research staff. Take a look at the course of Fluid Mechanics and learn about #fluids properties. #DiscoverEdibon #Engineering.
PDCFP Unit to Study the Pressure Drop of Compressible Fluids in Pipes
革新的なシステム
The Unit to Study the Pressure Drop of Compressible Fluids in Pipes, "PDCFP", allows the study of the compressible fluid pressure drop, for example the air of a compressor, and the different flow conditions (laminar and turbulent) thanks to the distribution of fluid in pipes that have differents sections and fittings.
関連ニュース
概要
The Unit to Study the Pressure Drop of Compressible Fluids in Pipes, "PDCFP", allows the study of the compressible fluid pressure drop, for example the air of a compressor, and the different flow conditions (laminar and turbulent) thanks to the distribution of fluid in pipes that have differents sections and fittings.
The unit consists of a system of pipes connected through a series of accessories that allow the distribution of air along a network. The pipes have different diameters. Besides, the pipe network has multiple pressure measurement taps to check the effects of the different accessories on the flow of air through the pipeline. The pressure taps along the pipe are used to determine the friction factor of the pipe and the pressure drops. The accessories includes are an elbow, an orifice plate, a narrowing and a widening of the pipe.
演習と指導の慣行
マニュアルに含まれるガイド付き実習
- Use of manometers to measure pressure drops.
- Air flow measurement with orifice plate.
- Determination of pressure drops in straight pipes and the friction factor of the pipe.
- Determination of pressure drops in elbows and angles and the resistance coefficient of each elbow and angle.
- Understanding the use of Reynolds’ numbers.
- Determination of the laminar or turbulent flow conditions.
- Calculation of the flow rate from the pressure drop in pipes.
補完的な機器
8.8.- 流体配管システム
AFTC
The Computer Controlled Fluid Friction in Pipes, with Hydraulics Bench (FME00), "AFTC", is designed to determine the friction coefficient in pipes of several diameters and roughness, to study the pressure losses and pressure development in...
8.8.- 流体配管システム
AFT
導管内流体摩擦実験装置(水圧ベンチFME00付)
The Fluid Friction in Pipes Unit, with Hydraulics Bench (FME00), "AFT", is designed to determine the friction coefficient in pipes of several diameters and roughness, to study the pressure losses in different types of valves and different fittings...
8.8.- 流体配管システム
AFT/B
導管内流体摩擦実験装置(基本水圧供給システムFME00/B付)
The Fluid Friction in Pipes Unit, with Basic Hydraulics Feed System (FME00/B), "AFT/B", is designed to determine the friction coefficient in pipes of several diameters and roughness, to study the pressure losses in different types of valves and...
8.8.- 流体配管システム
AFT/P
導管内流体摩擦実験装置
The Fluid Friction in Pipes Unit, "AFT/P", is designed to determine the friction coefficient in pipes, to study the pressure losses in different types of valves and different fittings and to compare different methods to measure the flow.This unit...
8.8.- 流体配管システム
AMTC
コンピューター制御導管ネットワーク装置(水力学ベンチFME00付)
The Computer Controlled Pipe Network Unit, with Hydraulics Bench (FME00), "AMTC", consists of a pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required...
8.8.- 流体配管システム
AMT
導管ネットワーク設備(水力学ベンチFME00付)
The Pipe Network Unit, with Hydraulics Bench (FME00), "AMT", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to work...
8.8.- 流体配管システム
AMT/B
導管ネットワーク設備(水力学ベンチFME00なし)
The Pipe Network Unit, without Hydraulics Bench (FME00), "AMT/B", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to...
8.8.- 流体配管システム
AMT/P
Mesh in Pipe Unit
The Mesh in Pipe Unit, "AMT/P", consists of a Pipe network, a lateral panel where all the elements to test are located and a hydraulics bench, which has all the elements and accessories required for the unit to work autonomously.The valves that...
8.8.- 流体配管システム
EGAC
コンピューター制御水撃実験装置
The Computer Controlled Water Hammer Unit, "EGAC", is designed to demonstrate the effects of an instantaneous variation of the speed of a fluid. It is possible to study the water hammer, which is the consequence of a quick change in a fluid speed....
8.7.5.- コンプレッサー
HFCC
コンピューター制御圧縮流体流動実験装置
The Computer Controlled Flow of Compressible Fluids Unit, "HFCC", allows to study the variation of pressure and density, the speeds of the fluid, the different fluctuations that the fluid presents when fluids across different sections in a pipe,...
8.9.3.- 設置および保守の慣行
PDDRC
貯水槽における一時流動排水プロセス コンピューター制御実験装置
The Computer Controlled Unit for Transient Drainage Processes in Storage Reservoirs, "PDDRC", allows to investigate transient drainage processes in storage reservoirs, to simulate a rainwater retention basin and to study the operation of a surge...
9.2.- 暖房、 換気、 空調、 温水
TSCAC
コンピュータ制御された空気ダクトシステムの装置
With the Computer Controlled Air Duct Systems Unit, "TSCAC", the user will study the air distribution under different configurations thanks to the supports included with the unit. The user himself will assemble the air ducts using usual elements...