Best sales

최고 판매자

Showing 451-480 of 889 item(s)

UNIT TO STUDY A MULTIPLE-DISC CLUTCH CUTAWAY MODEL - DCCM

액세서리 CMTM

Available

7.4.1.- 섹션 모델

DCCM

Unit to Study a Multiple-Disc Clutch Cutaway Model

액세서리 CMTM

It is a multiple-disk clutch. Multiple-disk clutches allow for transmitting higher torques. Such clutches are used in the steering of chain tractors.

UNIT TO STUDY A PLANETARY GEAR CUTAWAY MODEL - PGCM

액세서리 CMTM

Available

7.4.1.- 섹션 모델

PGCM

Unit to Study a Planetary Gear Cutaway Model

액세서리 CMTM

It is a planetary gear. It consists of one or more external or planet gears that revolves about a central or sun gear. Planetary gears are normally used as reducers in gearboxes or as differentials.

UNIT TO STUDY A SPUR GEAR CUTAWAY MODEL - SGCM

액세서리 CMTM

Available

7.4.1.- 섹션 모델

SGCM

Unit to Study a Spur Gear Cutaway Model

액세서리 CMTM

It is a spur gear. This type of gear is the simplest one, normally used for low or medium speeds, since they are noisy if not well-formed.

UNIT TO STUDY A TWO-STAGE SPUR GEAR CUTAWAY MODEL - SGCM/2

액세서리 CMTM

Available

7.4.1.- 섹션 모델

SGCM/2

Unit to Study a Two-Stage Spur Gear Cutaway Model

액세서리 CMTM

It is a two-stage spur gear. Two-stage gears are used when rotation transmission between shafts cannot be obtained with only one pair of gears.

UNIT TO STUDY A VARIABLE SPEED TRAPEZOIDAL BELT DRIVE CUTAWAY MODEL - BDCM

액세서리 CMTM

Available

7.4.1.- 섹션 모델

BDCM

Unit to Study a Variable Speed Trapezoidal Belt Drive Cutaway Model

액세서리 CMTM

It is a variable speed belt drive. Continuously variable gearboxes are the ideal transmission since they change the speed ratio continuously. For that reason they are considered an automatic transmission with infinite number of ratios. Variable...

UNIT TO STUDY A WORM GEAR CUTAWAY MODEL - WGCM

액세서리 CMTM

Available

7.4.1.- 섹션 모델

WGCM

Unit to Study a Worm Gear Cutaway Model

액세서리 CMTM

It is a worm gear with shafts perpendicular to each other. It consists of a helical worm screw and a circular cogwheel. Some applications of this device are automatic doors or elevators systems, where motion in one direction and blocking the...

Available

7.1.3.- 통계 및 역학

SRI

Unit to Study Rotational Inertia

The Unit to Study Rotational Inertia, "SRI", has been designed to carry out tests to analyze the moments of inertia of a solid and a hollow cylinder, both with same mass and diameter. The moment of inertia of another hollow cylinder with different...

UNIT TO STUDY THE PRESSURE DROP OF COMPRESSIBLE FLUIDS IN PIPES - PDCFP

PDCFP

Available

8.8.- 유체 배관 시스템

PDCFP

Unit to Study the Pressure Drop of Compressible Fluids in Pipes

The Unit to Study the Pressure Drop of Compressible Fluids in Pipes, "PDCFP", allows the study of the compressible fluid pressure drop, for example the air of a compressor, and the different flow conditions (laminar and turbulent) thanks to the...

Available

7.3.2.1.- 기계적 테스트

MUP

Universal Buckling Unit

The Universal Buckling Unit "MUP" is a bench-top unit whose frame is made of anodized aluminum profiles and plates and steel elements, on which a bubble level is installed to equilibrate the system.The unit has been designed to carry out tests...

UNIVERSAL MATERIAL TESTING UNIT - EEU/20KN

EEU/20KN

Available

7.3.2.1.- 기계적 테스트

EEU/20KN

Universal Material Testing Unit

The Universal Material Testing Unit, "EEU/20KN", is a didactic bench-top universal material testing unit. It is distinguished by its rigid construction, accurate control and a precise hydraulic system to apply loads of up to 20 kN, which enables...

Available

7.1.6.- TRIBOLOGY (마찰, 마모, 윤활)

MVV

Unsymmetrical Cantilever Unit

The system consists of a vertical cantilever rigidly clamped at its lower end to the main column which is attached to a rigid structure. Beams of different sections may be used.A loading head, located at the upper end of the column, can rotate...

METACENTRIC HEIGHT DEMOSTRATION OF A "U" SHAPED FLOATING BODY - FME11-B

FME11-B

Available

8.1.3.- 수압

FME11-B

U모양 플로팅 개체의 메타 중심 높이 설명

The Metacentric Height Demostration of a "U" Shaped Floating Object, "FME11-B", designed by EDIBON, allows the study of the stability of a floating object by calculating its metacentric height starting from a U-shaped floating body.The unit...

액세서리 HMM

Available

8.2.- 측정

HMM-U1000

U자형 마노미터

액세서리 HMM

The U-Shape Manometer, "HMM-U1000," designed by EDIBON, allows the study of various pressures and their relationship with the fluid. It measures the difference in liquid level in its columns, providing vital information for pressure analysis in...

VENTURI, BERNOULLI AND CAVITATION UNIT - FME22

FME22

Available

8.1.4.- 수압

FME22

Venturi, Bernoulli and Cavitation Unit

The Venturi, Bernoulli and Cavitation unit, "FME22", has been designed by EDIBON to demonstrate some of the practical possibilities that can be achieved with a Venturi tube.This unit is designed for demonstrating some practical possibilities with...

MVRE

Available

7.1.4.- 진동 및 진동

MVRE

Vibration of Coil Spring Unit

The Vibration of Coil Spring Unit, "MVRE", unit has been designed to study and understand a coil torsion spring, a mass-spring system and the fundamental properties of its characteristic periodic motion. In this sense, the unit consists of a rigid...

FME15

Available

8.1.8.- 유압 파이프

FME15

Water Hammer

With the Water Hammer unit, "FME15", designed by EDIBON, we can demonstrate the effects of the instantaneous or gradual variation of the velocity of a fluid.The water hammer phenomenon, which appears as a consequence of a rapid change in the...

WHEEL AND DIFFERENTIAL AXLE UNIT - MRYE2

MRYE2

Available

7.1.3.- 통계 및 역학

MRYE2

Wheel and Differential Axle Unit

The Wheel and Differential Axle Unit, "MRYE2", is a unit that allows for investigating the mechanics of a wheel and differential axle mechanism and demonstrating the force reduction on a differential pulley block.A wheel, consisting of a pulley...

MEER

Available

7.1.4.- 진동 및 진동

MEER

Whirling of Shafts Unit

The Whirling of Shafts Unit, "MEER", has been designed by EDIBON to demonstrate and determine different modes of oscillation and resonance of shafts with continuous distribution of mass under different conditions.The operation of the Whirling of...

MINI-EEE

Available

5.3.3.- 풍력 에너지

MINI-EEE

Wind Energy Basic Unit

The Wind Energy Basic Unit, "MINI-EEE", is a small-scale unit designed to study wind energy and the influence of some factors on its generation.This unit consists of a transparent tunnel, a wind turbine with rotor to place up to six blades and a...

Available

5.3.3.- 풍력 에너지

EEE

Wind Energy Unit

The Wind Energy Unit, "EEE", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The unit consists of a...

MTSF

Available

14.1.2.2.- 기어

MTSF

Worm and Wheel Unit

The Worm and Wheel Unit, "MTSF", allows to demonstrate the principle of a worm gear.The unit consists in a worm and a wheel. These parts are mounted on ball bearings and fixed to a vertical panel.The worm and wheel are positioned a set distance...

GAS POWER PLANTS SIMULATOR - PSV-GSPP-SOF

액세서리 PSV-PPSS

Available

5.1.3.1.- 발전

PSV-GSPP-SOF

가스 에너지 발전소 시뮬레이터

액세서리 PSV-PPSS

The PSV-GSPP-SOF software has been designed by EDIBON with the aim of showing the user the basic principles of operation of Brayton cycle gas turbine power plants, exposing in a didactic way the elements and parameters present in the generation...

Available

11.1.8.- 흡수 및 흡착

CAG

가스 흡수 컬럼

The Gas Absorption Column, "CAG", is a scale unit designed to study hydrodynamic and absorption processes in packed columns. This system absorbs ammonia or CO2 from a mixture with air in a watery solution that descends along the column.The main...

COMPUTER CONTROLLED GAS ABSORPTION COLUMN - CAGC

CAGC

Available

11.1.8.- 흡수 및 흡착

CAGC

가스 흡수 컬럼, 컴퓨터 제어 (PC)

The Computer Controlled Gas Absorption Column, "CAGC", is a scale unit designed to study hydrodynamic and absorption processes in packed columns. This system absorbs ammonia or CO2 from a mixture with air in a watery solution that flowing down the...

MSDA

Available

14.1.2.2.- 기어

MSDA

간단한 변속기 조립 장비

The Simple Drives Assembly Unit, "MSDA", allows the knowledge and learning of the fundamentals of the mechanical transmission technique, as well as the assembly, disassembly and experimentation with simple gears.The unit allows to carry out...

Available

7.2.1.- 브레이크 및 클러치

MSH

간단한 유압 장비

The Simple Hydraulic Unit, "MSH", has been designed for studies related to mechanical engineering and motor vehicles. It is used to demonstrate how a liquid can be used to transmit a force.The unit can also be used to conduct experiments to study...

Available

13.1.- 수 문학 및 수 문학

RFS

강 유량 시뮬레이터

The River Flow Simulator, "RFS", designed by EDIBON, allows the simulation and study of the river features, included the flow and solid bed load motion.The main element is a rectangular tank made of stainless steel supported on a metal beam frame,...

SEDIMENT TRANSPORT DEMONSTRATION CHANNEL - CAS

Available

13.1.- 수 문학 및 수 문학

CAS

개방형 침전 채널

The Sediment Transport Demonstration Channel, "CAS", designed by EDIBON, consist of an inclinable channel mounted on a base plate, supported by two supports, with a discharge tank and recirculating pump. This tank is in the Basic Hydraulic Feed...

WIRING INSTALLATION TRAINING FOR MAINS CONNECTION AND METERS IN BUILDINGS - WIT-MCB

WIT-MCB

Available

4.4.3.- 설치 및 유지 관리 관행

WIT-MCB

건물 네트워크 연결 및 전력계 전기 배선 실습

The Wiring Installation Training, Mains Connection and Meters in Buildings application, "WIT-MCB", has been designed by Edibon for the students formation at a proffessional-practical level in the field of the installation, wiring and testing of...

WIRING INSTALLATION TRAINING FOR ELECTRICAL INSTALLATIONS IN BUILDINGS - WIT-EIB

WIT-EIB

Available

4.4.3.- 설치 및 유지 관리 관행

WIT-EIB

건물 전기 배선 실습

The Wiring Installation Training, Electrical Installations in Buildings application, "WIT-EIB", has been designed by EDIBON for the students formation at a professional-practical level in the field of the installation, wiring and testing of...

추가 정보는 미국에 문의하십시오