최고 판매자
Showing 751-780 of 909 item(s)
AUTOMATIC STAMPING PRESS  - N-EM-PAE
  • N-EM-PAE
Available
6.2.2.1.- 제조 시스템
N-EM-PAE
자동 스탬핑 프레스
The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...
AUTOMATIC FILLING SYSTEM  - N-EM-SALL
  • N-EM-SALL
Available
6.2.2.2.- 레벨 및 흐름 제어
N-EM-SALL
자동 충전 시스템
The "N-EM" are a series of emulators that provide the students the required hardware to emulate the most common automatic systems.The "N-EM" modules are designed to work with the "AE-PLC" units to obtain the fundamental knowledge of PLC...
AUTOMOTIVE FUNDAMENTAL ELECTRICAL CIRCUITS UNIT - AV-ELC
  • AV-ELC
Available
2.5.- 자동차 전자
AV-ELC
자동차 기본 전기 회로 장비
The Automotive Fundamental Electrical Circuits Unit, "AV-ELC", provides a practical solution to the introduction of electricity in the automotive field with a group of common circuits used by the automobiles today.The circuits included in the...
AUTOMOTIVE FUNDAMENTAL ELECTRONIC CIRCUITS UNIT - AV-EC
  • AV-EC
Available
2.5.- 자동차 전자
AV-EC
자동차 기본 전자 회로 장비
The Automotive Fundamental Electronic Circuits Unit, "AV-EC", provides a practical solution to the introduction of electronics in the automotive field with a group of common circuits used in the automobiles nowadays.The circuits included in the...
AUTOMOTIVE ELECTRIC GENERATION UNIT - AV-GE
  • AV-GE
Available
2.5.- 자동차 전자
AV-GE
자동차 발전 장비
The Automotive Electric Generation Unit, "AV-GE", provides a practical solution to help to become familiar with the components used intoday’s automobile electrical circuits.The components included in "AV-GE" focus on the generation of electrical...
GEARBOX - MCC
  • MCC
Available
7.2.2.- 기어, 차동 장치 및 변속기
MCC
자동차 변속기
The Gearbox unit, "MCC", has been designed to represent the typical position of a simple gearbox with three gears ratio and reverse.Basically, the gearbox consists of several gears of different size that can be meshed as required. Those gears are...
AUTOMOTIVE AUXILIARY COMPONENTS UNIT - AV-AC
  • AV-AC
Available
2.5.- 자동차 전자
AV-AC
자동차 보조 부품 장비
The Automotive Auxiliary Components Unit, "AV-AC", provides a practical solution to obtain advance knowledge in the electronic and electric systems used in the automotive field today.All sensors and actuators included in the "AV-AC" unit are...
AUTOMOTIVE SENSORS UNIT - AV-S
  • AV-S
Available
2.5.- 자동차 전자
AV-S
자동차 센서 장비
The Automotive Sensors Unit, "AV-S", provides a practical solution to familiarize the students with the sensors used in modern automotive systems.The Automotive Sensors Unit, "AV-S", is composed of real sensors and components used in current...
AUTOMOTIVE STARTING AND CHARGING SYSTEMS UNIT - AV-SCS
  • AV-SCS
Available
2.5.- 자동차 전자
AV-SCS
자동차 시동 및 충전 시스템 장비
The Automotive Starting and Charging Systems unit, "AV-SCS", has been designed by EDIBON to provide theoretical and practical trainingin the field of electrical starting and charging systems for motor vehicles. This unit aims to provide students...
AUTOMOTIVE ACTUATORS UNIT - AV-A
  • AV-A
Available
2.5.- 자동차 전자
AV-A
자동차 엑추에이터 장비
The Automotive Actuators Unit, "AV-A", provides a practical solution to become familiar with the actuators used in today’s automobiles.The Automotive Actuators Unit, "AV-A", is composed by real actuators and components used in present automotive...
AUTOMOTIVE WIPER WASHER UNIT - AV-WW
  • AV-WW
Available
2.5.- 자동차 전자
AV-WW
자동차 와이퍼 장비
The Automotive Wiper Washer Unit, "AV-WW", provides a practical solution to the introduction of the components of the wiper washer system used in the automotive field nowadays.The components included in the "AV-WW" are focused on different...
AUTOMOTIVE ELECTRONIC CONTROL DEVICE UNIT - AV-ECD
  • AV-ECD
Available
2.5.- 자동차 전자
AV-ECD
자동차 전자 제어 장치 장비
The Automotive Electronic Control Device Unit, "AV-ECD", provides a practical solution to the introduction of electronic control units or ECUs.The Automotive Electronic Control Device Unit, "AV-ECD", is composed of an Electronic Control Unit (ECU)...
DIFFERENTIAL-CROWNWHEEL AND PINION - MDC
  • MDC
Available
7.2.2.- 기어, 차동 장치 및 변속기
MDC
자동차 차동 장치. 크라운 기어와 피니언
The Differential-Crownwheel and Pinion, "MDC", designed by EDIBON, simulates a differential mechanism. The function of the differential mechanism is to enable the drive wheels rotate at different speeds, regardless of whether they are the front or...
AUTOMATION SYSTEM SIMULATION SOFTWARE - AE-AS
  • AE-AS
Available
6.1.4.- 메카트로닉스 소프트웨어
AE-AS
자동화 시스템 시뮬레이션 소프트웨어
The Automation System Simulation Software, "AE-AS", is designed to perform the following tasks: 2D and 3D simulation of a real automation system, data acquisition, supervision and control (SCADA) with a real automation system through OPC protocol...
COMPUTER CONTROLLED TEACHING AUTONOMOUS PASTEURIZATION UNIT - PADC
  • PADC
Available
12.2.- 유제품 치료
PADC
자율형 교육용 저온살균기, 컴퓨터 제어(PC)
The Computer Controlled Teaching Autonomous Pasteurization Unit "PADC" receives cold milk from a refrigeration tank (not included). The milk is impelled with a milk pump (computer controlled). It is heated in the heat exchanger, by counter-current...
OWN DEVELOPMENT MODULE - N-M15
Available
2.2.- 회로 조립 용 키트
N-M15
자체 개발 모듈
액세서리 M-KITS
The Own Development Module "N-M15", designed by EDIBON, consists of a circuit board that will allow the realization of a set of assemblies on the mentioned board, allowing the study of the basic concepts of direct current circuits.The circuits can...
UNIT FOR THE KINEMATIC STUDY OF GEAR TRAINS - KSGT
  • KSGT
Available
7.1.2.2.- 기어
KSGT
장치 기어 트레인의 운동학적 연구 장비
The Unit for the Kinematic Study of Gear Trains, "KSGT", unit includes a pivoting rail with a fixed axle to which two more axles can be fixed in any position in function of the feature to study.The cogwheels may be assembled on the axles in...
COMPUTER CONTROLLED NOISE CONTROL DEMONSTRATION UNIT - TDRC
  • TDRC
Available
7.3.2.2.- 열 및 음향 테스트
TDRC
장치 소음 제어 시연 장비, 컴퓨터 제어
The Computer Controlled Noise Control Demonstration Unit, "TDRC", has been specifically designed to obtain visual and quantitative results related to noise and vibration control.The main parts of the unit are two noise sources consisting of a...
COMPUTER CONTROLLED CRITICAL SPEED INVESTIGATION UNIT - MVCC
  • MVCC
Available
7.1.4.- 진동 및 진동
MVCC
장치 임계 속도 연구 장비, 컴퓨터 제어
Some phenomena that appear in mechanical systems, such as vibration, self-centering and resonance in rotary shafts, can be clearly demonstrated with the Computer Controlled Critical Speed Investigation Unit, "MVCC".The operation of the "MVCC" unit...
WHIRLING OF SHAFTS UNIT - MEER
  • MEER
Available
7.1.4.- 진동 및 진동
MEER
장치 축 회전 연구 장비
The Whirling of Shafts Unit, "MEER", has been designed by EDIBON to demonstrate and determine different modes of oscillation and resonance of shafts with continuous distribution of mass under different conditions.The operation of the Whirling of...
SEDIMENTATION TANK - PDS
  • PDS
Available
11.1.11.- 여과, 침전 및 혼합
PDS
장치 침전조
The Sedimentation Tank, "PDS", is a teaching unit, designed by EDIBON, to demonstrate the sedimentation process and to familiarize with the settling principle of discrete particles settling into a tank. It will also allow to study the hydraulic...
LOW POWER SYNCHRONOUS GENERATORS APPLICATION - AEL-LPSG
  • AEL-LPSG
Available
5.1.3.1.- 발전
AEL-LPSG
저출력 동기 발전기 적용
The Low Power Synchronous Generators Unit, "AEL-LPSG", has been designed by EDIBON to study the procedure and the maneuvers required for the synchronization of synchronous generators with the grid, with the aim of delivering the generated energy...
RESISTANCE TRANSDUCERS - M41
  • M41
Available
2.3.5.- 전력 전자 (기초)
M41
저항 변환기
This unit allows different practices related to resistance transducers to be carried out. The unit has five different types of transducers: PTC, NTC, LDR, strain gauge and RTD.The operation of thermistors is based on the principle that the...
INTEGRATED LABORATORY FOR ELECTRICAL MACHINES: - LIMEL
  • LIMEL
Available
4.3.2.2.- DC 전기 모터 및 발전기
LIMEL
전기 기계 통합 실험실
LIMEL, Electrical Machines Integrated Laboratory is a set of different elements that can be interconnected to form a complete learning and teaching center. From the minimum configuration to the most advanced one (always depending on the customer’s...
ELECTRIC NETWORKS MODULE - N-M16
  • N-M16
Available
14.2.1.1.- 기본 전기 법 개념
N-M16
전기 네트워크 모듈
After studying the basic knowledge of electrical networks, we must understand and investigate the dependence between current and voltage applied to different electrical devices.With the Electric Networks Module, "N-M16", designed by EDIBON, it is...
FAULTS SIMULATION APPLICATION IN ELECTRICAL MOTORS - AEL-ESAM
  • AEL-ESAM
Available
4.3.2.1.- 교류 전기 모터 및 발전기
AEL-ESAM
전기 모터 고장 시뮬레이션 응용
The Faults Simulation Application in Electrical Motors, "AEL-ESAM", has been designed by EDIBON to simulate non-destructive faults in three-phase motors and application of diagnostic and localization techniques.This application allows simulating...
ENERGY EFFICIENCY IN ELECTRICAL MOTORS APPLICATION - AEL-EEEM
  • AEL-EEEM
Available
4.3.2.1.- 교류 전기 모터 및 발전기
AEL-EEEM
전기 모터 에너지 효율 응용
The Energy Efficiency in Electrical Motors Application, "AEL-EEEM" has been designed by EDIBON to allow the students to understand how cutting-edge devices used in high performance systems to control electrical motors work : frequency controllers...
PROTECTION MEASURES IN ELECTRICAL INSTALLATIONS - AEL-PMEI
  • AEL-PMEI
Available
4.1.2.2.- 전기적 위험 및 보호
AEL-PMEI
전기 설비 보호 측정 응용
The Protection Measures in Electrical Installations, "AEL-PMEI", has been designed by EDIBON for training practical and professional level in the field of installation and testing of the main electrical protections for the housing and industry and...
정보 요청