11.- 화학 공학

화학 공학은 원료를 유용하고 부가가치가 높은 제품으로 변환하기 위해 재료에서 물리적, 화학적 및 / 또는 생화학 적 변화가 발생하는 프로세스를 포함하는 프로세스 엔지니어링의 한 분야입니다.

더보기

이 분야는 이러한 변화가 수반되는 프로세스의 연구, 설계, 최적화, 개발 및 운영을 담당합니다. 또한 환경, 신기술 및 재료 설계 등 광범위한 연구 및 혁신 분야를 감안할 때 많은 응용 프로그램을 보유하고 있습니다.

이는 에너지 (대부분 석유), 제약, 식품, 전자 등과 같은 많은 다른 산업의 기반으로 간주되어 일부 국가에서 가장 중요한 경제 요소 중 하나입니다.

모든 화학 공정에는 일련의 단계가 포함됩니다. 특정 변경이 발생하는 각 단계는 단위 작업으로 정의되었습니다.

다른 한편으로 물질의 변화가 화학 인 공정의 단계는 화학 반응기에서 수행됩니다. 물질의 화학적 변화에 필요한 조건을 생성하도록 설계된 장비입니다.

화학 공학의 역사와 환경 개선의 측면에서 기술 발전의 역사를 통해 화학 엔지니어의 광범위한 지식과 성능을 감안할 때 오늘날 화학 엔지니어의 역할은 계속해서 성장하고 있으며 다음과 같은 활동을 수행합니다. 프로세스, 장비 및 공장 조립, 생산 관리, 관리, 품질 관리, 환경 관리, 마케팅, 제품 및 프로세스 R and D 및 기타 여러 관리 작업.

그들은 석유 화학, 정유소, 석탄 산업, 생화학, 생명 공학, 재료, 에너지, 제약 등과 같은 산업에서 업무 활동을 개발할 수 있습니다.

제품보기
관련 자료
화학 공학 하위 카테고리

11.1.- 유닛 운영

단위 작업은 화학 산업의 프로세스에서 발생하는 각각의 물리적 변화입니다. 그것들은 분명히 다른 작업이 수행되지만 기초는 동일한 다른 화학 공정의 연구에서 발생합니다.이러한 작업은 세 가지 유형으로 구분됩니다.대중 교통. 화학적 변화를 포함 할 수있는 물질의 질량 또는 구성의 변화. 이러한 작업은 증류, 흡수, 흡착, 추출 및 이온 교환입니다. 그들에게서 변화는 주로 물리적입니다.에너지 수송. 예를 들어, 압력 및 / 또는 온도의 변화로 인한 상태 변화를 수반 할 수있는 에너지 변화. 이 분류에는 증발이 포함되지만 에너지 수송과...
참조

11.2.- 화학 반응기

화학 반응기는 화학 반응이 발생할 수있는 장비입니다. 이것은 내부에 도입 된 물질의 화학적 조성에 변화가 있음을 의미합니다.최상의 변환 및 선택성을 얻을 수 있도록 설계되어 가능한 한 가장 최적의 결과를 얻습니다. 그들은 수행되는 반응에 따라 반응 속도를 향상시키는 화합물 인 촉매를 포함 할 수 있습니다. 이 촉매가 정제 된 효소이거나 상기 효소를 포함하는 유기체라면, 우리는 생물 반응기에 대해 이야기하고 있습니다.반응기에는 상 수 (균질 및 이종), 열 체계 (등온 또는 단열) 및 작동 유형 (불연속, 연속 또는 유동 및 반...
참조

화학 공학 장비

Showing 31-60 of 111 item(s)
LIQUID MASS TRANSFER AND DIFFUSION UNIT - QDTL
  • QDTL
Available
11.1.6.- 방송

QDTL

Liquid Mass Transfer and Diffusion Unit

The QDTL is a teaching unit that allows the students to familiarise with the notions of mass transfer theory, specially the diffusion in liquid systems, obtaining experimental data and results which are very useful for an ideal practice...
GASEOUS MASS TRANSFER AND DIFFUSION UNIT - QDTG
  • QDTG
Available
11.1.6.- 방송

QDTG

Gaseous Mass Transfer and Diffusion Unit

The Gaseous Mass Transfer and Diffusion Unit, "QDTG", allows the students to familiarize with the theoretical concepts about mass transfer unit operations, specifically the diffusion of a volatile liquid in an inert gas, obtaining very useful...
COMPUTER CONTROLLED BENCH TOP COOLING TOWER - TTEC
  • TTEC
Available
11.1.7.- 건조 및 냉각

TTEC

Computer Controlled Bench Top Cooling Tower

The Computer Controlled Bench Top Cooling Tower, "TTEC", includes a pump that impels hot water from a tank (with level switch and heating element) to the manifolds located at the top of the cooling tower. Water flow can be adjusted by a manual...
BENCH TOP COOLING TOWER - TTEB
  • TTEB
Available
11.1.7.- 건조 및 냉각

TTEB

Bench Top Cooling Tower

The Bench Top Cooling Tower, "TTEB", includes a pump that impels hot water from the tank (with level switch and heating element) to the manifolds located at the top of the cooling tower. Water flow can be adjusted by a manual needle valve.A...
COMPUTER CONTROLLED TRAY DRIER - SBANC
  • SBANC
Available
11.1.7.- 건조 및 냉각

SBANC

Computer Controlled Tray Drier

The Computer Controlled Tray Drier "SBANC" is a laboratory scale unit designed to study fluid mechanics, surface chemistry, solids structures and mass and energy balances related to the drying process.It consists of a tunnel, several trays where...
COMPUTER CONTROLLED SPRAY DRIER - SSPC
  • SSPC
Available
11.1.7.- 건조 및 냉각

SSPC

Computer Controlled Spray Drier

The Computer Controlled Spray Drier, "SSPC", allows to study processes that involve aqueous emulsions, solutions, suspensions andcolloidal solutions.Peristaltic pump delivers the liquid sample from a container through a small diameter jet into the...
SPRAY DRIER - SSPB
  • SSPB
Available
11.1.7.- 건조 및 냉각

SSPB

Spray Drier

The Spray Drier, "SSPB", allows to study processes that involve aqueous emulsions, solutions, suspensions and colloidal solutions.A peristaltic pump delivers the liquid sample from a container through a small diameter jet into the drying chamber....
COMPUTER CONTROLLED SPRAY DRYER AND CHILLER UNIT - SDCC
  • SDCC
Available
11.1.7.- 건조 및 냉각

SDCC

Computer Controlled Spray Dryer and Chiller Unit

The Computer Controller Spray Dryer and Chiller Unit, SDCC, consists of two systems with independent inlet and outlet computer controlled speed fans. For the spray drying, a computer controlled speed pump impels the liquid to be dried to the top...
FREEZE DRYER - BLIO
  • BLIO
Available
11.1.7.- 건조 및 냉각

BLIO

Freeze Dryer

The Freeze-Dryer, "BLIO", is able to carry out the freeze-drying process for the drying of different products inside a transparent chamber that allows the control of the pressure, and on heatable trays that allow to control the temperature of the...
COMPUTER CONTROLLED GAS ABSORPTION COLUMN - CAGC
  • CAGC
Available
11.1.8.- 흡수 및 흡착

CAGC

Computer Controlled Gas Absorption Column

The Computer Controlled Gas Absorption Column, "CAGC", is a scale unit designed to study hydrodynamic and absorption processes in packed columns. This system absorbs ammonia or CO2 from a mixture with air in a watery solution that flowing down the...
GAS ABSORPTION COLUMN - CAG
  • CAG
Available
11.1.8.- 흡수 및 흡착

CAG

Gas Absorption Column

The Gas Absorption Column, "CAG", is a scale unit designed to study hydrodynamic and absorption processes in packed columns. This system absorbs ammonia or CO2 from a mixture with air in a watery solution that descends along the column.The main...
COMPUTER CONTROLLED WETTED WALL GAS ABSORPTION COLUMN - CAPC
  • CAPC
Available
11.1.8.- 흡수 및 흡착

CAPC

Computer Controlled Wetted Wall Gas Absorption Column

The studied absorption process corresponds to the oxygen-deoxygenated water system, where the oxygen comes from the air and the deoxygenated air is obtained through a desorption column, where a water current comes into contact with a nitrogen...
LABORATORY SCALE PRESSURE SWING ADSORPTION UNIT - LPSA
  • LPSA
Available
11.1.8.- 흡수 및 흡착

LPSA

Laboratory Scale Pressure Swing Adsorption Unit

The Laboratory Scale Pressure Swing Adsorption Unit, "LPSA", is a laboratory scale plant that allows the performance of adsorption tests using the pressure swing technique.The LPSA unit allows to synthesize a mixture of gases coming from four...
COMPUTER CONTROLLED FIXED BED ADSORPTION UNIT - QALFC
  • QALFC
Available
11.1.8.- 흡수 및 흡착

QALFC

Computer Controlled Fixed Bed Adsorption Unit

The Computer Controlled Fixed Bed Adsorption Unit, "QALFC", is designed to demonstrate the gas adsorption phenomenon using a fixed adsorption column. The overall objective of this unit is to analyze the behavior of the adsorption breakthrough and...
COMPUTER CONTROLLED ADSORPTIVE AIR DRYING UNIT - QSAC
  • QSAC
Available
11.1.8.- 흡수 및 흡착

QSAC

Computer Controlled Adsorptive Air Drying Unit

The Computer Controlled Adsorptive Air Drying Unit, "QSAC", unit consists of a damp air drying plant by adsorption through a process of continuous regeneration of the adsorbent with transparent columns. It is formed by two different circuits, each...
COMPUTER CONTROLLED GAS WASHING PROCESSING PLANT - PLGC
  • PLGC
Available
11.1.8.- 흡수 및 흡착

PLGC

Computer Controlled Gas Washing Processing Plant

The Computer Controlled Gas Washing Processing Plant, "PLGC", has a water feed tank, from which and by means of a water pump, the water is pumped to the upper part of a column. The solids are added by means of a solid dosing system to the air...
COMPUTER CONTROLLED ADSORPTION UNIT - PEAC
  • PEAC
Available
11.1.8.- 흡수 및 흡착

PEAC

Computer Controlled Adsorption Unit

The Computer Controlled Adsorption Unit, "PEAC", demonstrates the removal of substances dissolved by adsorption. A computer controlled pump impels raw water (treated) from a supply tank to two adsorbers filled with activated carbon. A flow sensor...
COMPUTER CONTROLLED CORROSION STUDY UNIT - EECC
  • EECC
Available
11.1.9.- 이온 교환 및 부식

EECC

Computer Controlled Corrosion Study Unit

The Computer Controlled Corrosion Study Unit, "EECC", allows the corrosion simultaneous study up to eight corrosion cells. This unit allows to study several conditions that influence in the corrosion processes. Each sample for the test is put in...
CORROSION STUDY UNIT - EEC
  • EEC
Available
11.1.9.- 이온 교환 및 부식

EEC

Corrosion Study Unit

The Corrosion Study Unit, "EEC", allows the corrosion simultaneous study up to eight corrosion cells. This unit allows to study several conditions that influence in the corrosion processes. Each sample for the test is put in such away that...
COMPUTER CONTROLLED ION EXCHANGE UNIT - EIIC
  • EIIC
Available
11.1.9.- 이온 교환 및 부식

EIIC

Computer Controlled Ion Exchange Unit

The Computer Controlled Ion Exchange Unit, "EIIC", is a self-contained unit consisting of a panel with two transparent columns to be filled with anionic and cationic resins, plus a spare column and a computer controlled pump that supplies the...
ION EXCHANGE UNIT - EII
  • EII
Available
11.1.9.- 이온 교환 및 부식

EII

Ion Exchange Unit

The Ion Exchange Unit, "EII", is a self-contained unit composed by a panel, where two transparent columns are situated in order to put anionic and cationic resins, and also a spare column and a pump, which supplies the efficient from the tanks...
COMPUTER CONTROLLED CRYSTALLIZATION UNIT - QUCC
  • QUCC
Available
11.1.10.- 이온 교환 및 부식

QUCC

Computer Controlled Crystallization Unit

The Computer Controlled Crystallization Unit, "QUCC", is a unit for the study of the cooling crystallization process. EDIBON has designed this unit to study the crystallization reaction of those constituents whose solubility changes with the...
CRYSTALLIZATION UNIT - QUCB
  • QUCB
Available
11.1.10.- 이온 교환 및 부식

QUCB

Crystallization Unit

The Crystallization Unit, "QUCB", is a unit for the study of the cooling crystallization process. EDIBON has developed this unit to study thecrystallization reaction of those constituents whose solubility changes with the temperature.This unit is...
COMPUTER CONTROLLED ADVANCED CRYSTALLIZATION UNIT - QUCC/A
  • QUCC/A
Available
11.1.10.- 이온 교환 및 부식

QUCC/A

Computer Controlled Advanced Crystallization Unit

The Advanced Computer Controlled Crystallization Unit, "QUCC/A", designed by EDIBON, is a crystallization unit that by means of the cooling method allows the visualization and study of the industrial operation of mass transfer in which the...
ADVANCED CRYSTALLIZATION UNIT - QUCB/A
  • QUCB/A
Available
11.1.10.- 이온 교환 및 부식

QUCB/A

Advanced Crystallization Unit

The Advanced Crystallization Unit, "QUCB/A", designed by EDIBON, is a crystallization unit based on the cooling method that allows for observing and studying the mass transfer industrial operation in which a solid is formed from a homogeneous...
COMPUTER CONTROLLED PYROLYSIS UNIT - EPIRC
  • EPIRC
Available
11.1.10.- 이온 교환 및 부식

EPIRC

Computer Controlled Pyrolysis Unit

The Computer Controlled Pyrolysis Unit, "EPIRC", has been designed to study the pyrolysis process by thechemical decomposition of organic matter and multiple materials, with different temperature ramp rates.It consists of two main parts: a...
정보 요청