유럽

Our expert engineers have install the pilot plant created for the MOF4AIR project.

We are sure that the results obtained will represent a great advance for the project.

We were selected to construct three demonstration pilot plants. One of them is the pilot plant supplied in Solamat Merex. Solamat-Merex is a highly polluting french incinerator.

We are very proud to announce that the installation was a success!

Client:
IUT OF METZ, LORRAINE UNIVERSITY

Description:
This time, we have traveled to Lorraine (France). Here we have installed our Computer Controlled PEM Fuel Cell Unit “EC5C” and our Computer Controlled Biomass Process Unit “EBMC”

Client:
ECOLE NATIONALE SUPERIEURE EN GENIE DES TECHNOLOGIES INDUSTRIELLES, ENSGTI

Departament:
HIGHER NATIONAL SCHOOL IN ENGINEERING OF INDUSTRIAL TECHNOLOGIES

Description:
Université de Pau et des Pays de l’Adour entrusts EDIBON with the setting-up of the Wind Energy Unit “EEE”. It's always a pleasure to contribute to the development of practical education in Renewable Energy

Client:
ECOLE NATIONALE SUPERIEURE EN GENIE DES TECHNOLOGIES INDUSTRIELLES, ENSGTI

Description:
We are happy to announce a new installation of our Computer Controlled Flow of Compressible Fluids Unit, “HFCC”, in the Ecole Nationale Superieure En Genie Des Technologies Industrielles, Ensgti. Students will be able to study the variation of pressure and density and the thermodynamics and fluid dynamics characteristics that the fluid has among many other applications.

PDF

Client:
UNIVERSITÉ DE PAU ET DES PAYS DE L'ADOUR, PAU

Departament:
HIGHER NATIONAL SCHOOL IN ENGINEERING OF INDUSTRIAL TECHNOLOGIES

Description:
Université de Pau et des Pays de l’Adour entrusts EDIBON with the setting-up of the “EEE” wind energy unit. It's always a pleasure to contribute to the development of practical education

Customer:
DENMARKS TEKNISKE UNIVERSITET, DTU

Departament:
DEPARTAMENT OF CHEMICAL AND BIOCHEMICAL ENGINEERING

Description:
We have made a new installation for research, our Computer Controlled and Touch Screen Solid-Liquid Extraction Pilot Plant, "SLE00". With this unit, the researchers can now carry out several different solid-liquid extraction experiments working at high pressure and temperature conditions [up to 80ºC] and also they can work with different disolvents (base, acid, organic)

PDF

Customer:
BADEN-WÜRTTENBERG COOPERATIVE STATE UNIVERSITY, MANNHEIM

Departament:
Department of Mechanical Engineering

Description:
Installation and Training of units belonging to the area of Fluid Mechanics

Customer:
INSTITUTO SUPERIOR DE EDUCAÇÃO E CIÊNCIAS, ISEC

Department:
Engineering and Aeronautics Department

Description:
Our team has installed and trained teachers on several of our units: the Computer Controlled Two -Shaft Gas Turbine “TGDEC”, the Computer Controlled Axial Fan Teaching Unit, ”HVAC” and the Hydrostatics and Fluid Properties Bench among others

Client:
UNIVERSITY OF WESTERN MACEDONIA, UOWM

Description:
We have installed our Computer Controlled Two-Shaft Gas Turbine, “TGDEC”. This unit is a teaching unit for the operation demonstration of a Double Shaft Gas Turbine for electric generation and for other uses too.

PDF

Client:
AGRICULTURAL UNIVERSITY OF ATHENS

Departament:
Department of Natural Resources, Management and Agricultural Engineering

Description:
Installation and training of the equipment belonging to the areas of Thermodynamics and Chemical Engineering

PDF

Client:
INTERNATIONAL HELLENIC UNIVERSITY, THERMI

Departament:
RENEWABLE ENERGY LABORATORIES

Descripction:
Installation and training of several equipment belonging to the Energy area

Customer:
UNIVERSITY OF MALTA

Department:
Department of Environomental Design

Description:
With the Computer Controlled Recirculating Air Conditioning Unit “TARC”, students will be able to introduce into the complex world of air conditioning systems, as well as studying and determining the optimal parameters for the operation of the unit in function of the environmental requirements (humidity, heat, temperature and cooling, etc.)

Customer:
AGRICULTURE AND FOOD DEVELOPMENT AUTHORITY, TEAGASC

Description:
For them, we have custom designed and manufactured this Pilot Plant for Cereal Malting (CE00/MA) for research. This unit includes everything that is needed to understand the proper functioning of a cereal malting plant. It includes a steeping tank, a germinator, a dryer-roaster and a decuimer. In addition, it incorporates the auxiliary equipment necessary to carry out the operation in a comfortable and safe way. It’s entirely made with food grade materials.

PDF

Customer:
DUNDALK INSTITUTE OF TECHNOLOGY (DIT), DUNDALK

Departament:
Department of Electrical Engineering

Description:
It was a pleasure to spend time in Ireland at the Dundalk Institute of Technology, Institute of Technology Carlow, Waterford Institute of Technology, Limerick Institute of Technology and Galway-Mayo Institute of Technology installing our equipment for Practices in Installations and Wiring of Hybrid Energy System “AEL-WCHS” for electricity students

Customer:
PROFESSIONAL EDUCATION COMPETENCE CENTER "RIGA TECHNICAL COLLEGE", RTK

Description:
The entire Edibon team is grateful after having supplied and trained the teachers from the Vocational Education Competence Center Riga Technical College RTK. Some of the equipment installed are our Application of AC Three-Phase Induction Motor of Squirrel Cage "AEL-ACINA", the Application of AC Three-Phase Induction Motor of Wound Rotor "AEL-ACWRA", Lighting Application with Timer Switch "AEL-AD5", among others and all of them controlled from our PLC

Customer:
LICEO STATALE GALILEO GALILEI; ISTITUTO DI ISTRUZIONE SUPERIORE; ISTITUTO DI ISTRUZIONE SUPERIORE “F. BALSANO”; ISTITUTO DI ISTRUZIONE SUPERIORE "S. LOPIANO", COSENZA

Description:
There we have installed our Computer Controlled PEM Fuel Cell Unit, “EC5C”, and our Computer Controlled Thermal Solar Energy Unit, “EESTC”

Customer:
UNIVERSITÁ DI NAPOLI FEDERICO II

Description:
We would like to thank everyone at the Università degli Studi di Napoli Federico II (Italy) Unina News for their hospitality, where we carried out the installation of the Computer Controlled Flow Channels, with SCADA CFGC for the Civil Construction and Environmental Engineering department. This unit will allow students to experiment and perform multiple tests related to hydrodynamics

PDF

Customer:
UNIVERSITÀ DEGLI STUDI DI GENOVA, GENOVA

Departament:
Department of Civil, Chemical and Environmental Engineering

Description:
Students from the Department of Civil, Chemical and Environmental Engineering at the Università degli Studi di Genova, Italy can now enjoy and continue their training with the Computer Controlled Continuous Distillation Unit, with SCADA and PID Control. The student can investigate the principles that rule the mass and energy transference, as well as determine optima operation point to carry out a big quantity of separations. Proud of the setup.

Client:
UNIVERSIDAD FRANCISCO DE VITORIA, UFV

Description:
We are excited to announce the successful installation of a fully equipped Fluid Engineering Laboratory. This state-of-the-art lab is now home to advanced equipment designed to enhance both teaching and research capabilities in fluid mechanics. The newly installed systems allow for the detailed study of fluid dynamics, flow behavior, and hydraulic systems. With these resources, students and researchers will gain hands-on experience, deepen their theoretical knowledge, and drive innovation in the field of fluid engineering. This laboratory represents a significant step forward in providing top-tier education and research opportunities in this crucial area of engineering.

Client:
FORMACION PROFESIONAL - COLEGIO SALESIANOS

Description:
Installation of the Basic Unit of Mechanical Drive Systems, “MDSU,” designed to provide students with a foundational understanding of mechanical drive systems through hands-on experience and practical application.

Client:
UNIVERSIDAD DE CASTILLA LA MANCHA, UCLM

Institute:
RENEWABLE ENERGY RESEARCH INSTITUTE, IER

Description:
We have successfully installed our Basic Solar Thermal Energy Workstation, "MINI-EEST," which serves as an exceptional tool for demonstrating solar thermal heating for sanitary water.

Client:
CENTRO INTEGRADO DE FORMACIÓN PROFESIONAL Nº UNO - SANTANDER

Description:
We are pleased to share the installation of this custom-made equipment. They are a very valuable technical solution for carrying out experiments and test on internal combustion engines, allowing the generation of characteristic curves at different engine speeds and the comparison of characteristics between gasoline and diesel engines. This project, carried out in collaboration with the Ministry of Education, Vocational Training and Tourism, demonstrates our commitment to high-quality education and advanced technical training. Thanks to this equipment, students have access to cutting-edge equipment, preparing them to face the challenges of the working world with practical and up-to-date knowledge.

Client:
UNIVERSIDAD FRANCISCO DE VITORIA, UFV

Department:
BIOTECHNOLOGY DEPARTMENT

Description:
We have installed our Computer Controlled Chemical Reactors (QRC) with its Service Unit, “QUSC” and Computer Controlled Plug Flow Reactor, “QRPC”. The Computer Controlled Chemical Reactors (QRC) has been designed by EDIBON for the study and comparison of different types of chemical reactors.

Client:
NATIONAL REFERENCE CENTER FOR INSTALLATION AND MAINTENANCE OF REFRIGERATION AND AIR CONDITIONING

Description:
This significant upgrade includes two advanced units from the thermodynamics and thermotechnics area: the Computer Controlled Reversible Heat Pump + Air Conditioning + Refrigeration Unit with 2 Condensers and 2 Evaporators (Water/Air) (THIBAR22C) and the Introduction to Refrigeration Unit (TIR). These state-of-the-art units are designed to provide students with a comprehensive, hands-on understanding of complex refrigeration and air conditioning systems, bridging the gap between theory and practical application. We are confident that this installation will greatly enhance the educational experience, empowering students to master essential concepts in a highly interactive and effective manner.

Client:
UNIVERSIDAD POLITECNICA DE MADRID, UPM

Description:
We have successfully installed the Computer-Controlled Hydraulic Turbines Modular Unit "HTMC" at the Department of Civil Engineering: Hydraulics, Energy, and Environment within the Higher Technical School of Engineering and Industrial Design for Engineers of Roads, Canals, and Ports. This sophisticated unit allows students to explore and understand the operational characteristics of various small-scale hydraulic turbines. It provides the tools to measure and analyze hydraulic and mechanical efficiency curves, as well as to determine hydraulic and mechanical power outputs, enhancing the educational experience with practical, hands-on learning in renewable energy technologies.

Client:
UNIVERSIDAD CEU SAN PABLO

Departament:
DEPARTMENT OF ARCHITECTURE AND DESIGN

Description:
The Computer Controlled Geothermal (Low Enthalpy) Energy Unit, “EG5C”, is specifically designed to immerse students in the study of a rapidly advancing renewable energy source. This unit focuses on the application of geothermal energy for climate control in buildings, providing hands-on experience and practical knowledge in this critical area of sustainable technology. By working with the EG5C, students gain a comprehensive understanding of how low enthalpy geothermal energy can be harnessed to improve energy efficiency in modern construction.

Client:
UNIVERSIDAD POLITÈCNICA DE CATALUNYA, UPC

Departament:
FLUID MECHANICS DEPARTMENT

Description:
We have successfully installed the Computer Controlled Heat Exchangers Training System, “TICC”, along with our versatile Base Service Unit, “TIUS”, which is compatible with all available heat exchanger types. Additionally, we have included the Extended Concentric Tube Heat Exchanger, “TITCA”, further enhancing the system's capabilities. This comprehensive installation provides an exceptional platform for in-depth study and experimentation in heat transfer, offering students and researchers unparalleled opportunities to explore and understand the complexities of heat exchanger technology.

Client:
CONSEJERIA DE EDUCACIÓN, CULTURA Y DEPORTES DE CASTILLA LA MANCHA

Centers:
IES AGUAS VIVAS, IES JUANELO TURRIANO, IES PEDRO MERCEDES

Description:
We are thrilled to announce the successful installation of a range of advanced equipment, enhancing our educational and technological infrastructure. The newly installed units include the Computer Controlled Bench Top Cooling Tower, “TTEC”, Drum Brake Unit “MFT”, Disc Brake Unit “MFD”, Simple Hydraulic Unit “MSH”, Computer Controlled Refrigeration Circuit with Variable Load “TRCAC”, and the Automotive Fundamental Electrical Circuits Unit “AV-ELC”. Each unit has been meticulously selected to provide their students and professors with a state-of-the-art learning environment, fostering technical skills and innovative thinking in their respective fields.

Client:
UNIVERSIDAD CEU SAN PABLO

Description:
We are thrilled to announce the successful installation and commissioning of a state-of-the-art Renewable Energy Laboratory. This cutting-edge facility is now equipped with advanced equipment, including the Computer Controlled Photovoltaic Solar Energy Unit, “EESFC,” and the Computer Controlled Thermal Solar Energy Unit, “EESTC,” among many others. These units are designed to provide comprehensive, hands-on experience in the study and application of renewable energy technologies. The laboratory will significantly enhance the educational and research capabilities in the field of renewable energy, empowering students and researchers to explore innovative solutions for sustainable energy production. This installation marks a major milestone in our commitment to advancing education and research in renewable energy.

Client:
UNIVERSIDAD DE OVIEDO, UNIOVI

Description:
We have installed our Computer Controlled Advanced Oxidation Unit “POAC”. This unit allows students to study advanced oxidation as a method to remove organic substances also professors can do applied research.

Client:
UNIVERSIDAD POLITECNICA DE MADRID, UPM

Departament:
DEPARTAMENT OF CIVIL ENGINEERING

Description:
The Civil Engineering Department has been enhanced with the installation of our state-of-the-art Computer Controlled Teaching Unit for the Study of Regulation and Control, “RYC,” along with its specialized Level Control Module, “RYC-N.” This advanced equipment is designed to offer students and researchers an immersive, hands-on experience in mastering the complexities of regulation and control systems. This addition significantly boosts the department's educational resources, providing invaluable opportunities for in-depth study and practical application in civil engineering.

Client:
UNIVERSITAT DE VALÈNCIA, UV

Departament:
CHEMICAL ENGINEERING DEPARTMENT

Description:
We have installed our Fluid Friction in Pipes Unit, with Basic Hydraulics Feed System “AFTC”. This unit is designed to determine the friction coefficient in pipes of several diameters and roughness, to study the pressure losses in different types of valves and different fittings and to compare different methods to measure the flow.

Client:
UNIVERSIDAD DE SEVILLA, US

Departament:
ENERGY ENGINEERING DEPARTMENT

Description:
There, we have installed our Conditioning Unit with Climatic Chamber and Water Chiller “TACC” and one of our most important expansions: our IIOT Local/Remote Control and Monitoring with HMI “PLCHMI” unit. The “PLCHMI” expansion designed by EDIBON is a system that allows the user to operate and control EDIBON unit from a HMI and/or from the EDIBON SCADA software.

Client:
UNIVERSIDAD REY JUAN CARLOS, URJC

Department:
DEPARTMENT OF SIGNAL THEORY, COMMUNICATIONS, AND TELEMATIC SYSTEMS AND COMPUTING

Description:
We are pleased to announce our latest installation at URJC, specifically for the Department of Signal Theory, Communications, and Telematic Systems. This installation is designed to enhance education and research in the fields of mechanics and mechatronics, providing advanced training and hands-on experience for students and faculty alike.

Client:
UNIVERSIDAD DEL PAÍS VASCO, UPV/EHU

Departament:
DEPARTMENT OF THERMAL MACHINES AND ENGINES

Description:
We were pleased to complete the installation of our Computer Controlled Test Bench for 75 kW Engines, “TBMC75”, aimed at enhancing the training of students and supporting the research efforts of professors. This state-of-the-art equipment provided a robust platform for the detailed analysis and testing of high-power engines. With the "TBMC75", students gained valuable hands-on experience in engine performance and mechanics, while faculty members utilized its precise control and measurement capabilities to conduct advanced research. This installation significantly strengthened the educational and research opportunities in the field of engine dynamics.

Client:
UNIVERSIDAD DE VIGO, UVIGO

Departament:
ELECTRONICS DEPARTMENT

Description:
We are proud to present our advanced installation featuring the Computer Controlled Biomedical Circulatory System Teaching Unit, “BICSC”, the Computer Controlled Biomedical Human Biosignals and Parameters Teaching Unit, ”BIHBPC”, and the Computer Controlled Biomedical Spirometry and Breath Teaching Unit, “BISBC”. This cutting-edge equipment is designed to provide students and researchers with comprehensive, hands-on experience in the study of biomedical systems, offering unparalleled opportunities for in-depth learning and experimentation in the field of biomedical engineering.

Client:
UNIVERSIDAD DE HUELVA, UHU

Description:
Glad to announce one of our latest set-ups at Universidad de Huelva, with a complete installation for the Agroforestry Science department's students and researchers, including Computer Controlled Fluid Friction in Pipes, with Hydraulics Bench “FME00” “AFTC”, Computer Controlled Catalytic Reactors “QRCC”, Computer Controlled Radial Flow Turbine “TFRC” or Centrifugal Casting, Building-up Training Set 2 “MCEN”, among others.

Client:
UNIVERSIDAD REY JUAN CARLOS, URJC

Description:
We are excited to present the Hydrogen Bubble Flow Visualization Unit, “UVF”. This advanced unit provides a unique opportunity to visualize and analyze fluid flow patterns with remarkable clarity, making it an invaluable tool for both education and research in fluid dynamics. With this cutting-edge technology, students and researchers can gain deeper insights into the complexities of fluid behavior, enhancing their understanding of fundamental principles in an interactive and visually engaging way.

Client:
UNIVERSIDAD POLITÉCNICA DE CATALUÑA, UPC

Description:
We are proud to have installed the state-of-the-art Generator, “TGV-6KW” and the Advanced Computer Controlled Steam Turbine “TTVC”. This equipment is essential for the in-depth study of steam power plants, providing students and researchers with unparalleled opportunities to explore the principles and dynamics of steam generation and power conversion. With this installation, we empower future engineers to gain hands-on experience and deep understanding of steam power technologies, ensuring they are well-prepared to innovate in the energy sector.

Client:
UNIVERSIDAD DE VIGO, UVIGO

Description:
It was a great pleasure to collaborate with the electronic engineering department, which can now enjoy the benefits of studying and researching with newly installed equipment. Among the additions are: the Computer-Controlled Biomedical Circulatory System Teaching Unit "BICSC", the Computer-Controlled Biomedical Human Biosignals and Parameters Teaching Unit "BIHBPC", and the Computer-Controlled Biomedical Spirometry and Breath Teaching Unit "BISBC".

Client:
CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS, CSIC

Institute:
INSTITUTO DE LA GRASA

Description:
We are very pleased to announce our recent collaboration with Instituto de la Grasa, dependent on The Spanish National Research Council, CSIC, with the installation of the Advanced Computer Controlled Deodorizing Unit, “AEDC/A”. The “AEDC/A” allows the study of the deodorization process, stripping undesirable compounds from edible oils. We are condident it will offer a very enriching teaching experience. Thank you for your trust!

Client:
UNIVERSIDAD DE HUELVA, UHU

Description:
Our engineering team recently headed to the University of Huelva to install key equipment for the agroforestry science department. The new installations include notable systems such as Computer Controlled Fluid Friction in Pipes, with Hydraulics Bench (FME00)."AFTC", Computer Controlled Catalytic Reactors,"QRCC", Film and Dropwise Condensation Unit, "TCPGB" or the Computer Controlled Flow Channels (section: 80X300 mm), "CF 80/5" among others. We are proud to support such a prestigious institution in enhancing educational and research opportunities for their students.

Client:
CIFP TECNOLÓGICO INDUSTRIAL DE LÉON

Department:
Department of Energy and Water

Description:
We are thrilled to announce that EDIBON equipment has been successfully integrated into the technical inventory at CIFP Tecnológico Industrial in León. We have completed a comprehensive training program focused on energy and water treatment, which will equip students in the energy and water department with the knowledge to understand the operational functioning of these systems.

Client:
UNIVERSIDAD DEL PAÍS VASCO, UPV/EHU

Description:
The EDIBON team has carried out a installation, this time in our country, at the International “UPV/EHU”. Now, students and professors of the university have the possibility to continue their studies with the Computer Controlled Continuous Distillation, “UDCC”, the Computer Controlled Test Bench for Four-Cylinders Engines, 75 kW, “TBMC75” and the Two Doors Domestic Refrigeration System Trainer, “TRD2PC”. Hope you enjoy it!

Client:
UNIVERSIDAD DE VIGO, UVIGO

Description:
Installation and Training of units belonging to the Thermodynamic area.

PDF

Client:
UNIVERSIDAD AUTÓNOMA DE MADRID, UAM

Department:
CHEMICAL ENGINEERING

Description:
We have successfully completed the installation and training on specialized equipment for the Chemical Engineering and Food Technology Departments. This initiative is designed to enhance practical learning and foster innovation in chemical engineering processes. It aims to improve and facilitate the hands-on application and understanding of theoretical concepts.

PDF

Client:
UNIVERSIDAD DE CÁDIZ, UCA

Department:
DEPARTMENT OF SYSTEMS AND AUTOMATIC ENGINEERING, ELECTRONIC AND ELECTRONIC TECHNOLOGY

Description:
We are proud to announce the successful installation and comprehensive training on state-of-the-art equipment in their new Electricity and Electronics Laboratory. This advanced equipment is fully equipped to bridge the gap between theoretical learning and practical application, enabling students and professors to engage in cutting-edge research. It underscores our commitment to providing a dynamic and innovative learning environment that prepares students for the complexities of modern electrical and electronic challenges.

Client:
INSTITUTO QUÍMICO DE SARRIÁ

Department:
DEPARTMENT OF CHEMICAL ENGINEERING

Description:
We have carried out the installation of the Computer Controlled Crystallization Unit, “QUCC”.

PDF

Client:
UNIVERSIDAD CEU SAN PABLO

Description:
Installation and training of several equipment belonging to the Fluid Mechanics area.

PDF

Client:
UNIVERSIDAD DE CÁDIZ, UCA

Department:
DEPARTMENT OF SYSTEMS AND AUTOMATIC ENGINEERING, ELECTRONIC AND ELECTRONIC TECHNOLOGY

Description:
It was a pleasure to contribute to the training of the students of Universidad de Cádiz “UCA”. We hope you enjoy your new equipment installed.

PDF

Client:
UNIVERSIDAD DE CANTABRIA, UC

Department:
DEPARTMENT OF MINING ENGINEERING

Description:
We have successfully completed the installation and comprehensive training on advanced units dedicated to the study of Fluid Mechanics. This initiative equips their facilities with the latest technology in fluid dynamics and hydraulic systems, providing a crucial resource for both students and researchers.

Client:
UNIVERSIDAD REY JUAN CARLOS, URJC

Description:
We are pleased to announce the successful installation and comprehensive training on state-of-the-art equipment in the Materials and Mechanics area. This new solution brings cutting-edge equipment essential for in-depth studies of material properties and behaviors under mechanical stress.

PDF

Client:
UNIVERSIDAD DE GRANADA, UGR

Department:
DEPARTMENT OF STRUCTURAL MECHANICS & HYDRAULIC ENGINEERING

Description:
We have recently completed the installation and comprehensive training on specialized units in the area of Fluid Mechanics. These state-of-the-art systems are designed to provide hands-on learning experiences, facilitating a deep understanding of fluid dynamics principles.

PDF

Client:
UNIVERSITAT POLITÈCNICA DE VALÈNCIA, UPV

Department:
DEPARTMENT OF APPLIED THERMODYNAMICS

Description:
Installation and Training of units belonging to the area of Thermodynamics

PDF

Client:
UNIVERSIDAD REY JUAN CARLOS, URJC

Department:
DEPARTMENT OF CHEMICAL & ENVIRONMENTAL TECHNOLOGY

Description:
Installation and Training of units belonging to the area of Thermodynamics

PDF

Client:
CIFP TECNOLÓGICO INDUSTRIAL DE LÉON

Department:
DEPARTMENT OF ENERGY AND WATER

Description:
Installation and training of equipment belonging to the Energy area.

PDF

Client:
CENTRO INTEGRADO PÚBLICO DE FORMACIÓN PROFESIONAL DE CATARROJA

Department:
DEPARTMENT OF ENERGY & WATER

Description:
Installation and Training of units belonging to the area of Energy

PDF

Client:
IES SIERRA DE CARRASCOY, MURCIA

Department:
DEPARTMENT OF RENEWABLE ENERGIES

Description:
We are excited to announce the successful installation and comprehensive training of the Computer Controlled Wind Energy Basic Unit, "MINI-EEEC," in our Energy department. This state-of-the-art system is specifically designed to provide students and professors with practical insights into wind energy fundamentals. The addition of this unit enhances their curriculum by offering hands-on experience with cutting-edge technology, enabling learners to explore and understand the dynamics of wind energy generation and management. This initiative is a key step towards advancing our educational offerings in sustainable energy technologies.

Client:
UNIVERSIDAD DE LEÓN, UNILEON

Department:
DEPARTMENT OF FOOD HYGIENE AND TECHNOLOGY

Description:
Installation and training of units belonging to the Food and Water Technologies area.

Client:
UNIVERSIDAD DE CÁDIZ

Department:
ESCUELA SUPERIOR DE INGENIERÍA

Description:
Installation and training of units belonging to the Fluid Mechanics area.

PDF

Customer:
ÉCOLE POLYTECHNIQUE FÉDÉRALE DE LAUSANNE, LAUSANNE

Departament:
Laboratory of Chemical Engineering

Description:
Installation and Training of units belonging to the area of Energy, Fluid Mechanics, Process Control and Chemical Engineering

Client:
NORTH LINDSEY COLLEGE

Description:
The Computer Controlled Rerversible Heat Pump + Air Conditioning + Refrigeration with 2 Condensers and 2 Evaporators (Water/Air), "THIBAR22C" has as aim introduce the student to the study of the heat pumps, air conditioning and refrigeration, as well as the analysis and determination of the operation typical parameters of the unit depending on the two types of fluids used in the processes of evaporation and condensation (air and water).

Client:
DN COLLEGES GROUP

Description:

DN Colleges Group is a major education provider in South Yorkshire, Greater Lincolnshire and the Humber Region, incorporating Doncaster College and North Lindsey College. There we have installed our Computer Controlled Geothermal (low enthalpy) Energy Unit, "EG5C", and was designed to introduce the student into an increasingly leading renewable energy and, particularly, in the use of this energy for the climate control of buildings.

Client:
HULL COLLEGE

Description:
There we have installed our Computer Controlled Waves Energy Unit "EOMC" and our Computer Controlled Geothermal (low enthalpy) Energy Unit "EG5C", these equipment belong to the energy area, specifically in our renewable energy area. We are very proud to see that colleges like this one are committed to practical training in renewable energy.

PDF

Client:
UNIVERSITY OF DERBY

Department:
COLLEGE OF ENGINEERING AND TECHNOLOGY

Description:
Installation and training of several equipment related with electronics.

PDF

Client:
UNIVERSITY OF CHESTER

Departament:
DEPARTMENT OF MECHANICAL ENGINEERING

Description:
Installation and training of several equipment belonging to the area of Mechanics.

Customer:
NOVIA UNIVERSITY OF APPLIED SCIENCES

Department:
Mechanical Engineering

Description:
We are very happy to have completed another installation. This time we have moved up to Yrkeshögskolan Novia - Novia UAS Dept. of Mechanical Engineering to install the Computer Controlled Organic Rankine Cycle Unit, which allows the student to study the complete process and the components of an organic Rankine Cycle.

Customer:
UNIPETROL - LITVÍNOV

Description:
Installation and Training of Temperature, Pressure, Level and Flow Regulation Application, with Industrial Controller belonging to the Process Control Area.