8.7.- 유체 기계

유체 역학에서 특수 응용 분야는 유체 기계 연구를 담당하는 분야입니다. 유체 기계는 흐르는 유체에서 에너지를 변환하거나 에너지를 유체로 전달하는 장치입니다. 상기 유체는 기체, 증기 또는 액체 일 수있다.

이 정의에 따라 다음 분류를 추론 할 수 있습니다.

기계 생성 :

터빈 : 샤프트를 통과하는 유체 이동량의 변화로 인해 샤프트에 토크와 동력이 발생합니다.
풍력 터빈 : 바람의 운동 에너지를 기계적 에너지로 변환합니다.

소비 기계:

펌프 : 파이프의 마찰로 인해 유체가받는 압력 강하를 보완하기 위해 작업 형태로 유체에 기계적 에너지를 공급합니다.
팬 : 생성 된 압력 증가의 결과로 많은 양의 기체 흐름을 이동할 수 있습니다. 원심 또는 송풍기 팬과 축류 팬의 두 가지 기본 유형이 있습니다.
압축기 : 팬보다 적은 양의 흐름을 이동하지만 훨씬 더 높은 압력이 증가합니다.

기계는 환경이 제공하는 에너지를 활용하기 위해 고대부터 설계되었습니다. 예를 들어, 기계에 의해 기계 에너지를 수력 에너지로 변환하는 것은 대부분의 엔지니어와 기술자에게 큰 관심을 불러 일으 킵니다. 유압 기계의 일부 고전은 로마 휠 또는 유압 프레스이며 오늘날 우리는 일상 생활에서 항공기 엔진, 수영장 또는 자동차의 회로 펌프와 같은 유체 기계로 둘러싸여 있습니다. 풍차, 컴퓨터의 냉각 팬 또는 가정에서 사용되는 팬.

제품보기

유체 기계 장비

Showing 1-30 of 36 item(s)

COMPUTER CONTROLLED MULTIPUMP TESTING BENCH (4 TYPES OF PUMPS) - PBOC

PBOC

Available

8.7.1.- 슬리퍼

PBOC

Computer Controlled Multipump Testing Bench (4 types of pumps)

The Computer Controlled Multipump Testing Bench (4 types of pumps), "PBOC", allows the students to study the operating characteristics of several types of pumps. This unit allows to control and to measure the most representative parameters of the...

COMPUTER CONTROLLED MULTIPUMP TESTING BENCH (2 TYPES OF PUMPS) - PB2C

PB2C

Available

8.7.1.- 슬리퍼

PB2C

Computer Controlled Multipump Testing Bench (2 types of pumps)

The Computer Controlled Multipump Testing Bench (2 types of pumps), "PB2C", allows the students to study the operating characteristics of the centrifugal and gear pumps. This unit allows to control and to measure the most representative parameters...

COMPUTER CONTROLLED SERIES/PARALLEL PUMPS BENCH - PBSPC

PBSPC

Available

8.7.1.- 슬리퍼

PBSPC

Computer Controlled Series/Parallel Pumps Bench

The Computer Controlled Series/Parallel Pumps Bench, "PBSPC", is designed to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed water tank,...

PBSPB

Available

8.7.1.- 슬리퍼

PBSPB

Series/Parallel Pumps Bench

The Series/Parallel Pumps Bench, "PBSPB", is designed to demonstrate the operational advantages of parallel or series operation, depending on the required duty.This unit consists of two centrifugal pumps, a feed water tank, circulation pipes,...

COMPUTER CONTROLLED CENTRIFUGAL PUMP BENCH - PBCC

PBCC

Available

8.7.1.- 슬리퍼

PBCC

Computer Controlled Centrifugal Pump Bench

The Computer Controlled Centrifugal Pump Bench, "PBCC", is a bench-top unit consists of a centrifugal pump computer controlled, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump...

PBCB

Available

8.7.1.- 슬리퍼

PBCB

Centrifugal Pump Bench

The Centrifugal Pump Bench, "PBCB", is a bench-top unit consists of a centrifugal pump, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump experiments: two manometer and a flow sensor.A...

COMPUTER CONTROLLED GEAR PUMP BENCH - PBEC

PBEC

Available

8.7.1.- 슬리퍼

PBEC

Computer Controlled Gear Pump Bench

The Computer Controlled Gear Pump Bench, "PBEC", is a bench-top unit consists of a gear pump computer controlled, a feed water tank, circulation pipes, regulation valves, as well as the enough control elements for the pump experiments: two...

COMPUTER CONTROLLED AXIAL PUMP BENCH - PBAC

PBAC

Available

8.7.1.- 슬리퍼

PBAC

Computer Controlled Axial Pump Bench

The Computer Controlled Axial Pump Bench, "PBAC", is designed to study this type of pumps. It is a bench-top unit that consists of a computer controlled axial pump, a water tank and circulation pipes with a flow regulation valve. Besides, it...

COMPUTER CONTROLLED PISTON PUMP BENCH - PBRC

PBRC

Available

8.7.1.- 슬리퍼

PBRC

Computer Controlled Piston Pump Bench

The Computer Controlled Piston Pump Bench, "PBRC", is a bench-top unit that consists of a piston pump, a feed tank, flow meter tank calibrated for taking flow measurements, circulation pipes, manual valves and a solenoid valve, computer...

COMPUTER CONTROLLED AXIAL FLOW TURBOMACHINES UNIT - HMFAC

HMFAC

Available

8.7.3.- 터빈

HMFAC

Computer Controlled Axial Flow Turbomachines Unit

The Computer Controlled Axial Flow Turbomachines Unit, "HMFAC", allows the study of single-stage axial turbomachines, with interchangeable vanes for the study of both a pump and a turbine.The main part of the unit is the axial turbomachine...

PBEAB

Available

8.7.1.- 슬리퍼

PBEAB

Pumps Alignment and Study Bench

COMPUTER CONTROLLED CENTRIFUGAL FAN TEACHING UNIT - HVCC

HVCC

Available

8.7.2.- 팬

HVCC

Computer Controlled Centrifugal Fan Teaching Unit

The Computer Controlled Centrifugal Fan Teaching Unit, "HVCC", allows the students to study the operation characteristics of a centrifugal fan. For that purpose, the unit carries out the measurements of flow, speed, temperature, pressure and...

HVCB

Available

8.7.2.- 팬

HVCB

Centrifugal Fan Teaching Unit

The Centrifugal Fan Teaching Unit, "HVCB", allows the students to study the operation characteristics of a centrifugal fan. For that purpose, the unit carries out the measurements of flow, speed, temperature and humidity. Multiple tests related to...

COMPUTER CONTROLLED AXIAL FAN TEACHING UNIT - HVAC

HVAC

Available

8.7.2.- 팬

HVAC

Computer Controlled Axial Fan Teaching Unit

The Computer Controlled Axial Fan Teaching Unit, "HVAC", allows the observation, the study and the working process analysis of an axial-flow fan.The main element of this unit is a computer controlled speed centrifugal fan, which is measured...

HVAB

Available

8.7.2.- 팬

HVAB

Axial Fan Teaching Unit

The Axial Fan Teaching Unit, "HVAB", allows the observation, the study and the working process analysis of an axial-flow fan.The main element of this unit is a variable speed centrifugal fan, which is measured through a speed sensor, and a...

COMPUTER CONTROLLED PELTON TURBINE - TPC

Available

5.3.6.- 유압 에너지

TPC

Computer Controlled Pelton Turbine

The Computer Controlled Pelton Turbine, "TPC", designed by EDIBON, consists of a small-scale Pelton turbine, with a valve that allows the flow to be regulated. The turbine includes a PELTON runner with 16 buckets, which can be clearly seen through...

COMPUTER CONTROLLED FRANCIS TURBINE - TFC

Available

5.3.6.- 유압 에너지

TFC

Computer Controlled Francis Turbine

The Computer Controlled Francis Turbine, "TFC", consists of a small-scale Francis Turbine, with a valve that allows flow regulation and has a ring with adjustable guide vanes that allows control of the angle of incidence of the water in the...

COMPUTER CONTROLLED KAPLAN TURBINE - TKC

Available

5.3.6.- 유압 에너지

TKC

Computer Controlled Kaplan Turbine

The Computer Controlled Kaplan Turbine, "TKC", consists of a small-scale Kaplan turbine that has a ring with adjustable guide vanes, which allow the control of water flow in the turbine.In order to raise the fluid, it has a computer controlled...

COMPUTER CONTROLLED RADIAL FLOW TURBINE - TFRC

TFRC

Available

5.3.6.- 유압 에너지

TFRC

Computer Controlled Radial Flow Turbine

The Computer Controlled Radial Flow Turbine, "TFRC", consists of a small-scale radial flow turbine with two nozzles at 90 degrees to the perpendicular direction of the axis of rotation.In order to raise the fluid, it has a computer controlled pump...

COMPUTER CONTROLLED AXIAL FLOW TURBINE - TFAC

TFAC

Available

5.3.6.- 유압 에너지

TFAC

Computer Controlled Axial Flow Turbine

The Computer Controlled Axial Flow Turbine, "TFAC", consists of a small-scale turbine with single-stage axial flow input. It has eight nozzles that act as water rings to the rotor, four of which have an incidence angle of 20º and the other four of...

COMPUTER CONTROLLED EXPERIMENTAL REACTION TURBINE - HTRC

HTRC

Available

5.3.6.- 유압 에너지

HTRC

Computer Controlled Experimental Reaction Turbine

The Experimental Reaction Turbine, Computer Controlled (PC), "HTRC", allows to study the characteristics of operation of a small scale reaction turbine.This unit includes suitable instrumentation to measure the main parameters:There is a pressure...

COMPUTER CONTROLLED EXPERIMENTAL IMPULSE TURBINE - HTIC

HTIC

Available

5.3.6.- 유압 에너지

HTIC

Computer Controlled Experimental Impulse Turbine

The Computer Controlled Experimental Impulse Turbine, "HTIC", allows to study the characteristics and the behavior of a small scale impulse turbine.This unit includes suitable instrumentation to measure the main parameters:There is a pressure...

COMPUTER CONTROLLED HYDRAULIC TURBINES MODULAR UNIT - HTMC

HTMC

Available

8.7.3.- 터빈

HTMC

Computer Controlled Hydraulic Turbines Modular Unit

Computer Controlled Modular Hydraulic Turbine Unit,"HTMC", has been designed by EDIBON for the study and comparison of different types of small scale hydraulic turbines, allowing the determine the operation characteristics of this type of turbine,...

액세서리 HTMC

Available

8.7.3.- 터빈

HT-F

프란시스 터빈 모델

액세서리 HTMC

액세서리 HTMC

Available

8.7.3.- 터빈

HT-FA

축류 터빈 모델

액세서리 HTMC

액세서리 HTMC

Available

8.7.3.- 터빈

HT-FR

방사 터빈 모델

액세서리 HTMC

액세서리 HTMC

Available

8.7.3.- 터빈

HT-K

카플란 터빈 모델

액세서리 HTMC

액세서리 HTMC

Available

8.7.3.- 터빈

HT-P

펠턴 터빈 모델

액세서리 HTMC

COMPUTER CONTROLLED WIND ENERGY UNIT - EEEC

EEEC

Available

5.3.3.- 풍력 에너지

EEEC

Computer Controlled Wind Energy Unit

The Computer Controlled Wind Energy Unit, "EEEC", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The...

Available

5.3.3.- 풍력 에너지

EEE

Wind Energy Unit

The Wind Energy Unit, "EEE", contains an aerogenerator, in laboratory-scale, and is used to study the conversion of kinetic wind energy into electrical energy and to study the influence of some factors on this generation.The unit consists of a...

추가 정보는 미국에 문의하십시오