AE-PLC-PHD 펀칭 교육용 스테이션

6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
PUNCHING WORKSTATION - AE-PLC-PHD

혁신적인 시스템

The "AE-PLC-PHD" is a processing workstation commanded by a PLC.

일반적인 설명보기

확장

ICAI

상호작용형 컴퓨터 지원 교육 소프트웨어

관련 뉴스

EDIBON and its commitment to European Skills
EDIBON and its commitment to European Skills
At EDIBON, we are committed to strengthening skills as a strategic pillar for the competitiveness and social well-being of the European Union. Proper training not only boosts the economy but also enables individuals to fully participate in society and democracy.
더 읽어보기

일반적인 설명

The "AE-PLC-PHD" is a processing workstation commanded by a PLC. This unit takes a piece and introduces it inside the punching zone that is protected with a polycarbonate screen. Once the piece is inside the punching zone, the hydraulic punching machine simulates that punches the piece.

The "AE-PLC-PHD" workstation is designed as a modular system to facilitate the understanding of the unit. The main components are:

  • The PLC: is composed by an AE-PLCB (with HMI devices, analog and digital input/output, etc.) unit and all the extra modules needed to perform a correct working of the workstation.
  • The control panel: with start/stop button, emergency push button, reset button, light indicators to show current state of the process, etc.
  • The pneumatic circuit: contains the required solenoid valves, filters and regulators to assure the correct working and safety of the unit.
  • The workstation: is composed by real industrial components used by the industrial automatic punching machines such as hydraulic punching machine, pneumatic actuators, punching zone protected with polycarbonate, capacitive sensors, etc.

The "AE-PLC-PHD" is an independent workstation that can work alone and/or in conjunction with other workstation to make up a complete Flexible Manufacturing system*.

*The Flexible manufacturing systems product list is available at "Flexible Manufacturing Systems (FMS)" area of the general catalogue.

필수 구성 요소

추천되는 요소들

비슷한 제품

FILTERING WORKSTATION - AE-PLC-FT
  • AE-PLC-FT
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-FT
여과 교육용 스테이션
The "AE-PLC-FT" is a filtration system commanded by a PLC. The "AE-PLC-FT" is composed of two tanks with a filter between them. The liquids are pumped from the first tank into the second tank through the filter using a pump and different types of...
뷰 유닛
MIXING WORKSTATION - AE-PLC-MS
  • AE-PLC-MS
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-MS
혼합 교육용 스테이션
The "AE-PLC-MS" is a mixing system commanded by a PLC. The "AE-PLC-MS" is composed of three tanks with different liquids. These liquids are pumped and mixed in a reactor vessel using a pump and different valves. The system is equipped with flow...
뷰 유닛
FILLING WORKSTATION - AE-PLC-FS
  • AE-PLC-FS
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-FS
충전 교육용 스테이션
The "AE-PLC-FS" is a filling system commanded by a PLC. The workstation detects the bottles that arrive on a conveyor belt to the filling position and pumps liquids from a reservoir tank into the bottles using a pump and different types of valves....
뷰 유닛
CORKING WORKSTATION - AE-PLC-CRS
  • AE-PLC-CRS
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-CRS
코르크 마개 교육용 스테이션
The "AE-PLC-CRS" is a corking system commanded by a PLC. The workstation detects the bottles that arrives on a conveyor belt to the corking position and closes them with a cap using a pressing cylinder. The "AE-PLC-CRS" also includes different...
뷰 유닛
BOTTLE OPENING WORKSTATION - AE-PLC-APB
  • AE-PLC-APB
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-APB
캔 개봉 교육용 스테이션
The "AE-PLC-APB" is a bottles opening system commanded by a PLC. The unit is equipped with different containers and a retention system based on a cylinder, in order to allow the Robotic Arm Workstation "AE-BR" or the SCARA Arm Workstation "AE-SCA"...
뷰 유닛
MOUNTING WORKSTATION - AE-PLC-M
  • AE-PLC-M
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-M
조립 교육용 스테이션
The "AE-PLC-M" is a mounting workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-M" keeps the pieces in a vertical storage. The workstation take the pieces one by one, the quality...
뷰 유닛
AUTOMATIC PRESSING WORKSTATION - AE-PLC-P
  • AE-PLC-P
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-P
자동 프레스 교육용 스테이션
The "AE-PLC-P" is an automatic pressing workstation commanded by a PLC. The "AE-PLC-P" moves the pieces from the input zone tothe pressing zone, once the piece is detected in the pressing zone, the "AE-PLC-P" emulates pressing the pieces with a...
뷰 유닛
AUTOMATIC SCREWDRIVING WORKSTATION - AE-PLC-AT
  • AE-PLC-AT
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-AT
자동 나사 조임 교육용 스테이션
The "AE-PLC-AT" is an automatic screw workstation commanded by a PLC that supply and mount four screws in a piece. The "AE-PLC-AT" keeps the screws in a vertical storage. The workstation take the screws, one by one, and a pneumatic manipulator...
뷰 유닛
BOTTLING WORKSTATION - AE-PLC-MEMB
  • AE-PLC-MEMB
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-MEMB
병입 교육용 스테이션
The "AE-PLC-MEMB" is a bottling workstation commanded by a PLC that provides pieces to the system and mount them inside of the base pieces.The "AE-PLC-MEMB" transport the input bottles, to the filling area. In this zone, the "AE-PLC-MEMB" fills...
뷰 유닛
LABELLING WORKSTATION - AE-PLC-MET
  • AE-PLC-MET
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-MET
라벨링 교육용 스테이션
The "AE-PLC-MET" is an automatic labelling machine commanded by a PLC. The "AE-PLC-MET" also include a transporting system that carries the incoming bottles to the labelling zone, supplying the bottles one by one.The "AE-PLC-MET" workstation is...
뷰 유닛
DRILLING WORKSTATION - AE-PLC-ST
  • AE-PLC-ST
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-ST
드릴링 교육용 스테이션
The "AE-PLC-ST" is an automatic drilling workstation commanded by a PLC. The "AE-PLC-ST" also include a conveyor system to transport the incoming pieces to the drilling zone where the drilling machine simulate the process.The "AE-PLC-ST"...
뷰 유닛
MOLDING WORKSTATION - AE-PLC-SMOLD
  • AE-PLC-SMOLD
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-SMOLD
성형 교육용 스테이션
The "AE-PLC-SMOLD" is an automatic molding workstation commanded by a PLC. The "AE-PLC-SMOLD" also include a conveyor system to transport the incoming pieces to the molding zone where the unit simulate a molding process by punching the piece with...
뷰 유닛
CUTTING WORKSTATION - AE-PLC-SCOR
  • AE-PLC-SCOR
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-SCOR
절단 교육용 스테이션
The "AE-PLC-SCOR" is an automatic cutting workstation commanded by a PLC. The "AE-PLC-SCOR" also includes a conveyor system to transport the incoming pieces to the cutting zone where the cutting machine simulate the process.The "AE-PLC-SCOR"...
뷰 유닛
PROCESS CONTROL WORKSTATION - AE-PLC-CP
  • AE-PLC-CP
Available
6.2.5.2.- 프로세스 워크 스테이션 애플리케이션
AE-PLC-CP
공정 제어 교육용 스테이션
The "AE-PLC-CP" is a process control workstation commanded by a PLC that coordinates the work of 3 industrial controllers that regulates in parallel the level, flow rate, temperature and pressure processes. The "AE-PLC-CP" workstation has been...
뷰 유닛

품질

판매 후 서비스

정보 요청