- Home
- 생성물
- 1.- 물리학
- 아카데믹 프로그램
- 2.- 전자
- 3.- 연락
- 4.- 전기
- 5.- 에너지
- 6.- 메카트로닉스와 자동화
- 7.- 역학
- 8.- 유체 역학
- 9.- 열역학 및 열공학
- 10.- 공정 제어
- 11.- 화학 공학
- 12.- 식품 및 수자원 기술
- 13.- 환경
- 14.- 의용 생체 공학
- 실험실 액세서리
- 맞춤형 실험 공장
- 모듈
- 확장
- 실험실
- 사업의 라인
- 과학 기술
- 다운로드
- 우리에 대해
- 뉴스
- 문의하기
2TV 기술 및 직업 교육을위한 전자 연구실
모듈들
관련 뉴스
At EDIBON, we are committed to strengthening skills as a strategic pillar for the competitiveness and social well-being of the European Union. Proper training not only boosts the economy but also enables individuals to fully participate in society and democracy.
On December 1st, the Repair Course for Small Laboratory Equipment, taught by our engineers at the EDIBON facilities, was completed, lasting 4 days.
The attendees, (Laboratory technicians and maintenance of the Rey Juan Carlos University of Madrid) had the opportunity to perform multiple...
보완 장비
14.2.2.- 전력 전자 (기초)
SPC
The Weighing System, with Computer Data Acquisition "SPC" consist of a digital force meter that allows to determine both the mass and weight of a body (traction) as well as to determine compression forces.It has different adaptors according to the...
14.2.1.3.- 디지털 전자
TDS
Computer Controlled Teaching Unit for the Study of Digital Signal Processing
The Teaching Unit for the Study of Digital Signal Processing "TDS" allows to study the principles and more important concepts about digital signal processing, including study and practical exercises, among others, of:Continuous waveforms...
6.1.2.2.- 전력 전자 및 산업 전자
TECNEL
Computer Controlled Teaching Unit for the Study of Power Electronics (with IGBTS)
The Computer Controlled Teaching Unit for the Study of Power Electronics (with IGBTS), "TECNEL" is a unit with Computer Control and Data Acquisition System designed to study the basis of Power Electronics. It allows students to study AC/DC, DC/AC,...
6.1.1.3.- 산업 시스템 애플리케이션
UCP-P
Computer Controlled Process Control Unit for the Study of Pressure (Air)
The Computer Controlled Process Control Unit for the Study of Pressure (Air), "UCP-P", consists of a compressed air duct whose flow is controlled by a pneumatic valve (the compressed air or gas source is not included). The air is supplied through...
6.1.2.1.- 센서 및 전자 기기
BS
센서 스터디 모듈 시스템
The Modular System for the Study of Sensors, "BS", designed by EDIBON, includes a wide range of units that include different electronic components designed to control the signal produced by the transducers (sensors and actuators) on the one hand,...
6.1.2.1.- 센서 및 전자 기기
BS1
진동 및/또는 변형 실험 모듈
Vibrations and/or Deformations Test Module, "BS1" has been designed to teach mechanical vibration and displacement variable measurement techniques.On the upper side of the test module there is a girder or elastic/vibrant sheet that is the one...
6.1.2.1.- 센서 및 전자 기기
BS10
조명 실험 모듈
The objective of the Light Test Module, "BS10", is to show some of the techniques used to measure light or illumination intensity.The module is equipped with a lamp whose light intensity can be controlled by the variation of the voltage...
6.1.2.1.- 센서 및 전자 기기
BS2
온도 실험 모듈
The Temperature Test Module, "BS2", has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space....
6.1.2.1.- 센서 및 전자 기기
BS3
압력 실험 모듈
The Pressure Test Module, "BS3", has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques. On the left upper side of the module there is a pressure...
6.1.2.1.- 센서 및 전자 기기
BS4
유량 실험 모듈
The objective of Flow Test Module, "BS4", is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one of them there is a pumping system that allows to pump the water from the reserve tank,...
6.1.2.1.- 센서 및 전자 기기
BS5
오븐 실험 모듈
With the Ovens Test Module, "BS5", is possible to study temperature measurement techniques using several kinds of sensors placed inside the sealed place that is used as oven.This module is basically made up of an oven that contains a changeable...
6.1.2.1.- 센서 및 전자 기기
BS6
액체 레벨 실험 모듈
The Liquid level Test Module, "BS6", has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...
6.1.2.1.- 센서 및 전자 기기
BS7
타코미터 실험 모듈
The Tachometer Test Module, "BS7", has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...
6.1.2.1.- 센서 및 전자 기기
BS8
근접 시험 모듈
The Proximity Test Module, "BS8", has been designed to teach techniques to detect the proximity of objects, focusing on the distance at which each sensor is able to detect the object and the type of material it can detect. In the upper part there...
6.1.2.1.- 센서 및 전자 기기
BS9
공압 시험 모듈
The Pneumatics Test Module, "BS9", has been designed to teach techniques of control and handling of a pneumatic piston.All connections of the different BS9 mechanisms will have output through a group of 2 mm. terminals. They are placed in the...
6.1.2.1.- 센서 및 전자 기기
BSPC
컴퓨터(PC)로 제어되는 BS 기본 유닛
The BSPC is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned before a data acquisition system can effectively and accurately acquire the signal. These circuits consist...
14.2.1.3.- 디지털 전자
CADDA
컴퓨터 제어 A / D 및 D / A 컨버터 장치
The Computer Controlled A/D and D/A Converters Unit, "CADDA", unit has been designed to help the students to learn how to perform the most common procedures and study the different circuits used to convert analog signals in a digital signals and...
6.1.1.2.- 산업 컨트롤러
CEAB
Field Bus Applications Unit
The Trainer for Field Bus Applications, "CEAB", provides the components to conform a real Profibus DP Network where the PC is the master device and different components included with the unit are the slave devices. The "CEAB" unit also allows to...
6.1.1.2.- 산업 컨트롤러
CEAC
Computer Controlled Controller Tuning Unit
The Computer Controlled Controller Tuning Unit, "CEAC", provides the tools to simulate different industrial processes in a HIL system and control them with a commercial industrial controller. The CEAC unit works in conjunction with a computer, in...
6.1.1.2.- 산업 컨트롤러
CECI
Industrial Controllers Unit
The Industrial Controllers Unit, "CECI", is based on a modular design structure whose functionality is divided into different modules toallow the student a better understanding of the unit. The modules included in the unit are: industrial...
6.1.1.2.- 산업 컨트롤러
CRCI
Industrial Controllers Networking
The Industrial Controllers Networking, "CRCI", unit is based on a modular design structure whose functionality is divided into different modules to allow the student a better understanding of the unit. The modules provided with the unit are: two...
1.1.- 3D 물리학
EFAC
3차원 물리학, 컴퓨터(PC)로 제어됨
The Computer Controlled Three Dimensional (3D) Physics, "EFAC", from EDIBON, allows to do practical exercises in the different fields of physics (electricity, magnetic fields, mechanics, acoustics, optics and thermodynamics).
The "EFAC" is an...
2.1.- 전원 공급 장치, 측정 장비 및 액세서리
FACO
전원 공급 장치
Using this power supply, training and practices can be done conventionally. This is the most common power supply used with our modules.
1.1.- 3D 물리학
FCE
전기장 연구 세트
The Electric Fields Study Set, "FCE", allows the spatial study of the electric field in all its dimensions: calculation of the intensity, force lines, equipotential surfaces in both static and dynamic fields, giving the student a more extensive...
1.1.- 3D 물리학
FCM
자기장 연구 세트
The Magnetic Field Study Set, "FCM", allows the spatial study of the magnetic field in all its dimensions (calculation of magnetic field strength, lines of force, vector potential and equipotential lines both in static and dynamic fields). For...
14.2.1.6.- 전력 전자
LIEBA
기초 전자 및 전기 실험실
We present a flexible and modular-based system for learning basic electronics, basic electricity and circuit theory. The advantage given by this learning and teaching system is that the student establishes his own rhythm, thus rendering...
2.2.- 회로 조립 용 키트
M-KITS
기본 전자 및 전기 조립 키트:
The purpose of Electronics and Electricity Assembly Kits (M-KITS) is to provide the students with the necessary elements for creating their own circuits.
2.2.- 회로 조립 용 키트
M1/KIT
직류 회로 키트 (DC)
With the Direct Current (DC) Circuits Kit, "M1/KIT", designed by EDIBON, you can begin to study the basic principles of direct current.
2.2.- 회로 조립 용 키트
M10/KIT
시스템 및 디지털 컨버터 키트
With Digital Systems and Converters Kit, "M10/KIT", designed by EDIBON, the behaviour of BCD/Binary counters, comparators and analogue integrators can be studied, as well as analogue/digital conversion and viceversa.
2.2.- 회로 조립 용 키트
M11/KIT
디지털 전자 기초 키트
With Digital Electronic Fundamentals Kit, "M11/KIT", designed by EDIBON, numbering systems, logic circuits, TTL gates, CMOS, Boolean algebra, etc. can be studied.
2.2.- 회로 조립 용 키트
M12/KIT
기본 조합 회로 키트
With Basic Combinational Circuits Kit, "M12/KIT", designed by EDIBON, encoders, decoders, multiplexers, demultiplexers, digital comparators and arithmetic and logical operations can be studied.
2.2.- 회로 조립 용 키트
M13/KIT
기본 순차 회로 키트
With Basic Sequential Circuits Kit, "M13/KIT", designed by EDIBON, all types of bistables, counters, flip-flops, synchronous sequential circuits and the operation of memories can be studied.
2.2.- 회로 조립 용 키트
M14/KIT
광전자학 키트
With Optoelectronics Kit, "M14/KIT", designed by EDIBON, the main light emitters and liquid crystal displays (LCD), photoconductive cells, fibre optics, infrared, etc. can be studied.
2.2.- 회로 조립 용 키트
M16/KIT
전력 네트워크 키트
With the Electric Networks Kit, "M16/KIT", designed by EDIBON, it is possible to understand the principles of Ohm’s Law, Norton’s and Thévenin’s Theorem, Wheatstone bridge operation, superposition theorems or star/delta transformation and viceversa.
2.2.- 회로 조립 용 키트
M2/KIT
교류 회로 키트 (AC)
With Alternating Current (AC) Circuits Kit, "M2/KIT", designed by EDIBON, you can start to study the basic principles in alternating current.
2.2.- 회로 조립 용 키트
M3/KIT
반도체 키트 I
With Semiconductors I Kit, "M3/KIT", designed by EDIBON, the basic concepts of diodes can be studied, at the same time as the student will be asked to carry out a series of assemblies on the practice board to consolidate his knowledge of PN-type...
2.2.- 회로 조립 용 키트
M4/KIT
반도체 키트 II
With Semiconductors II Kit, "M4/KIT", designed by EDIBON, semiconductors can be studied by extending the knowledge acquired in the basic module "M3/KIT".
2.3.5.- 전력 전자 (기초)
M41
저항 변환기
This unit allows different practices related to resistance transducers to be carried out. The unit has five different types of transducers: PTC, NTC, LDR, strain gauge and RTD.The operation of thermistors is based on the principle that the...
14.2.1.5.- 전력 전자 (기초)
M44
빛 응용
This unit allows different practices related to the measurement of light intensity to be carried out. Photodiodes are semiconductor light sensors that generate a current or voltage when the P-N junction in the semiconductor is illuminated with...
14.2.1.5.- 전력 전자 (기초)
M45
선형 위치 및 힘
Linear Variable Displacement Transducers (LVDT) provide a certain amount of voltage output relative to the parameters being measured, for example force, for signal conditioning.With Linear Position and Force Unit, "M45", designed by EDIBON, it is...
14.2.1.5.- 전력 전자 (기초)
M46
환경 측정
Environmental measurement is a data collection process. In other words, it is a continuous and systematic follow-up study of environmental variables (air quality and speed, humidity, pressure, etc.). The aim is to identify and evaluate...
14.2.1.5.- 전력 전자 (기초)
M47
회전 속도 및 위치 제어
The unit is equipped with a DC motor whose rotation speed can be controlled by the supply voltage. The following sensors are arranged along the motor shaft: optical slot sensor, inductive sensor, infrared reflection sensor, Hall effect sensor,...
14.2.1.5.- 전력 전자 (기초)
M48
소리 측정
With the Sound Measurement Unit, "M48", designed by EDIBON, different practices related to sound measurements can be carried out. The unit has three different types of components: two types of microphones and a loudspeaker.
2.2.- 회로 조립 용 키트
M5/KIT
전원 공급 키트
With the Power Supplies Kit "M5/KIT", designed by EDIBON, symmetrical voltage regulators, operation of fixed, symmetrical and switched-mode power supplies as well as rectification (conversion of an AC voltage to a DC voltage) can be studied.
2.2.- 회로 조립 용 키트
M6/KIT
진동 발생기 키트
With the Oscillators Kit, "M6/KIT", designed by EDIBON, the different oscillators can be studied: RC and LC network oscillators, Wein bridge, Colpitts, Hartley and the astable multivibrator.
2.2.- 회로 조립 용 키트
M7/KIT
오퍼레이션 앰프 키트
With Operational Amplifiers Kit, "M7/KIT", designed by EDIBON, the different amplifiers can be studied: inverting, non-inverting, additive, differential and comparators.
2.2.- 회로 조립 용 키트
M8/KIT
필터 키트
With Filters Kit, "M8/KIT", designed by EDIBON, the different types of filters can be studied: RC and LC, in "T" type configuration, active filters and also study associations of one and others in order to be able to practice with more complex...
2.2.- 회로 조립 용 키트
M9/KIT
전력 전자 키트
With Power Electronics Kit, "M9/KIT", designed by EDIBON, the operation of MOSFET transistors, thyristors, TRIACs, etc. can be studied.
2.3.2.- 아날로그 전자
M99
Analog Circuits Unit
The Analog Circuits Unit, "M99", designed by EDIBON, allows to do different practices related to basic electronics. The unit has different parts: analog multiplexer, analog multiplier, function generator, AM modulator and AM demodulator.The "M99"...
2.3.1.- 기본 전기 법 개념
M99-6
Electronics for Motors and Generators Unit
The Electronics for Motors and Generators Unit, "M99-6", designed by EDIBON, enables to carry out different practices related with motors and generators. The unit has different different types of motors: DC motor, AC motor and stepper motor.The...
2.2.- 회로 조립 용 키트
N-M15
자체 개발 모듈
The Own Development Module "N-M15", designed by EDIBON, consists of a circuit board that will allow the realization of a set of assemblies on the mentioned board, allowing the study of the basic concepts of direct current circuits.The circuits can...
6.1.1.1.- 이론적 실용적 기초
RYC
Computer Controlled Teaching Unit for the Study of Regulation and Control
Regulation and control theory is divided into two major divisions in, namely, classical and modern. The implementation of classical controller designs as compared to systems designed using modern control theory is easier and these controllers are...
6.1.1.1.- 이론적 실용적 기초
RYC-BB
봉-공 시스템용 PID 제어 및 조절 장비
The "RYC-BB" Ball and Beam module has been designed to study a practical control system, through the study of a classical control system, the Ball and Beam Control system.The "RYC-BB" module consists of two main components: the "RYC-BB" apparatus...
6.1.1.1.- 이론적 실용적 기초
RYC-C
유량의 PID 제어 및 조절 장비
The "RYC-C" Flow Rate Control module has been designed to study a practical control system, through the flow rate of a close water circuit.The "RYC-C" module consists of two main components: the "RYC-C" apparatus and the "RYC-C" interface box. The...
6.1.1.1.- 이론적 실용적 기초
RYC-CLM
자기 부상의 PID 제어 및 조절 장비
The "RYC-CLM" Magnetic Levitation Control module has been designed to study a practical control system.The "RYC-CLM" module consists of two main components: the "RYC-CLM" apparatus and the "RYC-CLM" interface box. The "RYC-CLM" apparatus contains...
6.1.1.1.- 이론적 실용적 기초
RYC-CP
모터 위치의 PID 제어 및 조절 장비
The "RYC-CP" Position Control module has been designed to study a practical control system, through the control of a linear position system.The "RYC-CP" module consists of two main components: the "RYC-CP" apparatus and the "RYC-CP" interface box....
6.1.1.1.- 이론적 실용적 기초
RYC-I
조도 PID 제어 및 조절 장비
The "RYC-I" Luminosity Control module has been designed to study a practical control system and study different light sensors, through the luminosity control with three different light sensors.The "RYC-I" module consists of two main components:...
6.1.1.1.- 이론적 실용적 기초
RYC-N
수위의 PID 제어 및 조절 장비
The "RYC-N" Level Control module has been designed to study a practical control system, through the control of the water level of a tank.The "RYC-N" module consists of two main components: the "RYC-N" apparatus and the "RYC-N" interface box. The...
6.1.1.1.- 이론적 실용적 기초
RYC-P
압력 수준 PID 제어 및 조절 장비
The "RYC-P" Pressure Control module has been designed to study a practical control system, through the control of the air pressure level of an air pressure tank.The "RYC-P" module consists of two main components: the "RYC-P" apparatus and the...
6.1.1.1.- 이론적 실용적 기초
RYC-pH
pH 수준 PID 제어 및 조절 장비
The "RYC-pH" pH Control module has been designed to study a practical control system, through the pH dissolution control in a stirred tank.The "RYC-pH" module consists of two main components: "RYC-pH" apparatus and "RYC-pH" interface box. The...
6.1.1.1.- 이론적 실용적 기초
RYC-PI
역진자 PID 제어 및 조절 장비
The "RYC-PI" Inverted Pendulum Control module has been designed to study a practical control system, through the control of a linear position system of movable cart.The "RYC-PI" module consists of two main components: the "RYC-PI" apparatus and...
6.1.1.1.- 이론적 실용적 기초
RYC-SM
DC 서보모터의 PID 제어 및 조절 장비
The "RYC-SM" Servo Motor module has been designed to study a practical control system, through the control of the position and speed of a DC Servo Motor.The "RYC-SM" module consists of two main components: the "RYC-SM" apparatus and the "RYC-SM"...
6.1.1.1.- 이론적 실용적 기초
RYC-TAG
수류 온도의 PID 제어 및 조절 장비
The "RYC-TAG" Water Flow Temperature Control module has been designed to study a practical control system, through the control of water flow temperature.The "RYC-TAG" module consists of two main components: the "RYC-TAG" apparatus and the...
6.1.1.1.- 이론적 실용적 기초
RYC-TAR
기류 온도의 PID 제어 및 조절 장비
The "RYC-TAR" Air Flow Temperature Control module has been designed to study a practical control system, through the control of an air flow temperature.The "RYC-TAR" module consists of two main components: the "RYC-TAR" apparatus and the "RYC-TAR"...
6.1.1.1.- 이론적 실용적 기초
RYC-TE
온도의 PID 제어 및 조절 장비
The "RYC-TE" Temperature Control module has been designed to study a practical control system, through the control of the water temperature in a tank.The "RYC-TE" module consists of two main components: the "RYC-TE" apparatus and the "RYC-TE"...
6.1.1.1.- 이론적 실용적 기초
RYC/B
PID 제어 및 조절 기초 장비
The Basic Teaching Unit for the Study of Regulation and Control, "RYC/B", allows the user to learn the basics about regulation and control of first and second order systems.This unit enables to carry a set of practices related with basic...
6.1.2.1.- 센서 및 전자 기기
SAIT
Transducers and Instrumentation Unit
The Transducers and Instrumentation Unit, "SAIT", has been designed by EDIBON to show most of the devices used in the industry that allow the electronic systems to communicate with the real world, to measure physical variables and to control...
14.2.2.- 전력 전자 (기초)
SCSP
압력 센서 교정 시스템
The Pressure Sensors Calibration System, "SCSP", is mainly composed of two pressure manometers on one hand, one measuring up to 1000 millimeters of water or 100 millibars and the other one measuring up to 2.5 bars and on the other hand, two vacuum...
14.2.2.- 전력 전자 (기초)
SPC
컴퓨터(PC) 기반 데이터 수집이 가능한 계량 시스템
The Weighing System, with Computer Data Acquisition "SPC" consist of a digital force meter that allows to determine both the mass and weight of a body (traction) as well as to determine compression forces.It has different adaptors according to the...
14.2.1.3.- 디지털 전자
TDS
Computer Controlled Teaching Unit for the Study of Digital Signal Processing
The Teaching Unit for the Study of Digital Signal Processing "TDS" allows to study the principles and more important concepts about digital signal processing, including study and practical exercises, among others, of:Continuous waveforms...
6.1.2.2.- 전력 전자 및 산업 전자
TECNEL
Computer Controlled Teaching Unit for the Study of Power Electronics (with IGBTS)
The Computer Controlled Teaching Unit for the Study of Power Electronics (with IGBTS), "TECNEL" is a unit with Computer Control and Data Acquisition System designed to study the basis of Power Electronics. It allows students to study AC/DC, DC/AC,...
6.1.1.3.- 산업 시스템 애플리케이션
UCP-P
Computer Controlled Process Control Unit for the Study of Pressure (Air)
The Computer Controlled Process Control Unit for the Study of Pressure (Air), "UCP-P", consists of a compressed air duct whose flow is controlled by a pneumatic valve (the compressed air or gas source is not included). The air is supplied through...
6.1.2.1.- 센서 및 전자 기기
BS
센서 스터디 모듈 시스템
The Modular System for the Study of Sensors, "BS", designed by EDIBON, includes a wide range of units that include different electronic components designed to control the signal produced by the transducers (sensors and actuators) on the one hand,...
6.1.2.1.- 센서 및 전자 기기
BS1
진동 및/또는 변형 실험 모듈
Vibrations and/or Deformations Test Module, "BS1" has been designed to teach mechanical vibration and displacement variable measurement techniques.On the upper side of the test module there is a girder or elastic/vibrant sheet that is the one...
6.1.2.1.- 센서 및 전자 기기
BS10
조명 실험 모듈
The objective of the Light Test Module, "BS10", is to show some of the techniques used to measure light or illumination intensity.The module is equipped with a lamp whose light intensity can be controlled by the variation of the voltage...
6.1.2.1.- 센서 및 전자 기기
BS2
온도 실험 모듈
The Temperature Test Module, "BS2", has been designed to teach the use and applications of sensors of temperature as a measure, and its control.We have a half-open space in whose interior there are two lamps that are going to heat that space....
6.1.2.1.- 센서 및 전자 기기
BS3
압력 실험 모듈
The Pressure Test Module, "BS3", has been designed to teach the use and applications of this kind of sensors measurement systems. It shows the different pressure measurement techniques. On the left upper side of the module there is a pressure...
6.1.2.1.- 센서 및 전자 기기
BS4
유량 실험 모듈
The objective of Flow Test Module, "BS4", is to show techniques to measure changeable fluids.The module is made up of two tanks assembled on a structure. In one of them there is a pumping system that allows to pump the water from the reserve tank,...
6.1.2.1.- 센서 및 전자 기기
BS5
오븐 실험 모듈
With the Ovens Test Module, "BS5", is possible to study temperature measurement techniques using several kinds of sensors placed inside the sealed place that is used as oven.This module is basically made up of an oven that contains a changeable...
6.1.2.1.- 센서 및 전자 기기
BS6
액체 레벨 실험 모듈
The Liquid level Test Module, "BS6", has been designed to teach the use and applications of level sensors and their measurement systems. This module teaches techniques to measure and control the liquid level in a tank.On this there is a two tanks...
6.1.2.1.- 센서 및 전자 기기
BS7
타코미터 실험 모듈
The Tachometer Test Module, "BS7", has been designed to teach linear and angular speed measurement techniques. In this module placed on the upper part we have a miniature motor used to move the axle. The motor speed can be changed adjusting the...
6.1.2.1.- 센서 및 전자 기기
BS8
근접 시험 모듈
The Proximity Test Module, "BS8", has been designed to teach techniques to detect the proximity of objects, focusing on the distance at which each sensor is able to detect the object and the type of material it can detect. In the upper part there...
6.1.2.1.- 센서 및 전자 기기
BS9
공압 시험 모듈
The Pneumatics Test Module, "BS9", has been designed to teach techniques of control and handling of a pneumatic piston.All connections of the different BS9 mechanisms will have output through a group of 2 mm. terminals. They are placed in the...
6.1.2.1.- 센서 및 전자 기기
BSPC
컴퓨터(PC)로 제어되는 BS 기본 유닛
The BSPC is a complete unit designed to provide signal conditioning for many sensors and transducers output signals that must be conditioned before a data acquisition system can effectively and accurately acquire the signal. These circuits consist...
14.2.1.3.- 디지털 전자
CADDA
컴퓨터 제어 A / D 및 D / A 컨버터 장치
The Computer Controlled A/D and D/A Converters Unit, "CADDA", unit has been designed to help the students to learn how to perform the most common procedures and study the different circuits used to convert analog signals in a digital signals and...
6.1.1.2.- 산업 컨트롤러
CEAB
Field Bus Applications Unit
The Trainer for Field Bus Applications, "CEAB", provides the components to conform a real Profibus DP Network where the PC is the master device and different components included with the unit are the slave devices. The "CEAB" unit also allows to...
6.1.1.2.- 산업 컨트롤러
CEAC
Computer Controlled Controller Tuning Unit
The Computer Controlled Controller Tuning Unit, "CEAC", provides the tools to simulate different industrial processes in a HIL system and control them with a commercial industrial controller. The CEAC unit works in conjunction with a computer, in...
6.1.1.2.- 산업 컨트롤러
CECI
Industrial Controllers Unit
The Industrial Controllers Unit, "CECI", is based on a modular design structure whose functionality is divided into different modules toallow the student a better understanding of the unit. The modules included in the unit are: industrial...
6.1.1.2.- 산업 컨트롤러
CRCI
Industrial Controllers Networking
The Industrial Controllers Networking, "CRCI", unit is based on a modular design structure whose functionality is divided into different modules to allow the student a better understanding of the unit. The modules provided with the unit are: two...
1.1.- 3D 물리학
EFAC
3차원 물리학, 컴퓨터(PC)로 제어됨
The Computer Controlled Three Dimensional (3D) Physics, "EFAC", from EDIBON, allows to do practical exercises in the different fields of physics (electricity, magnetic fields, mechanics, acoustics, optics and thermodynamics).
The "EFAC" is an...
2.1.- 전원 공급 장치, 측정 장비 및 액세서리
FACO
전원 공급 장치
Using this power supply, training and practices can be done conventionally. This is the most common power supply used with our modules.
1.1.- 3D 물리학
FCE
전기장 연구 세트
The Electric Fields Study Set, "FCE", allows the spatial study of the electric field in all its dimensions: calculation of the intensity, force lines, equipotential surfaces in both static and dynamic fields, giving the student a more extensive...
1.1.- 3D 물리학
FCM
자기장 연구 세트
The Magnetic Field Study Set, "FCM", allows the spatial study of the magnetic field in all its dimensions (calculation of magnetic field strength, lines of force, vector potential and equipotential lines both in static and dynamic fields). For...
14.2.1.6.- 전력 전자
LIEBA
기초 전자 및 전기 실험실
We present a flexible and modular-based system for learning basic electronics, basic electricity and circuit theory. The advantage given by this learning and teaching system is that the student establishes his own rhythm, thus rendering...
2.2.- 회로 조립 용 키트
M-KITS
기본 전자 및 전기 조립 키트:
The purpose of Electronics and Electricity Assembly Kits (M-KITS) is to provide the students with the necessary elements for creating their own circuits.
2.2.- 회로 조립 용 키트
M1/KIT
직류 회로 키트 (DC)
With the Direct Current (DC) Circuits Kit, "M1/KIT", designed by EDIBON, you can begin to study the basic principles of direct current.
2.2.- 회로 조립 용 키트
M10/KIT
시스템 및 디지털 컨버터 키트
With Digital Systems and Converters Kit, "M10/KIT", designed by EDIBON, the behaviour of BCD/Binary counters, comparators and analogue integrators can be studied, as well as analogue/digital conversion and viceversa.
2.2.- 회로 조립 용 키트
M11/KIT
디지털 전자 기초 키트
With Digital Electronic Fundamentals Kit, "M11/KIT", designed by EDIBON, numbering systems, logic circuits, TTL gates, CMOS, Boolean algebra, etc. can be studied.
2.2.- 회로 조립 용 키트
M12/KIT
기본 조합 회로 키트
With Basic Combinational Circuits Kit, "M12/KIT", designed by EDIBON, encoders, decoders, multiplexers, demultiplexers, digital comparators and arithmetic and logical operations can be studied.
2.2.- 회로 조립 용 키트
M13/KIT
기본 순차 회로 키트
With Basic Sequential Circuits Kit, "M13/KIT", designed by EDIBON, all types of bistables, counters, flip-flops, synchronous sequential circuits and the operation of memories can be studied.
2.2.- 회로 조립 용 키트
M14/KIT
광전자학 키트
With Optoelectronics Kit, "M14/KIT", designed by EDIBON, the main light emitters and liquid crystal displays (LCD), photoconductive cells, fibre optics, infrared, etc. can be studied.
2.2.- 회로 조립 용 키트
M16/KIT
전력 네트워크 키트
With the Electric Networks Kit, "M16/KIT", designed by EDIBON, it is possible to understand the principles of Ohm’s Law, Norton’s and Thévenin’s Theorem, Wheatstone bridge operation, superposition theorems or star/delta transformation and viceversa.
2.2.- 회로 조립 용 키트
M2/KIT
교류 회로 키트 (AC)
With Alternating Current (AC) Circuits Kit, "M2/KIT", designed by EDIBON, you can start to study the basic principles in alternating current.
2.2.- 회로 조립 용 키트
M3/KIT
반도체 키트 I
With Semiconductors I Kit, "M3/KIT", designed by EDIBON, the basic concepts of diodes can be studied, at the same time as the student will be asked to carry out a series of assemblies on the practice board to consolidate his knowledge of PN-type...
2.2.- 회로 조립 용 키트
M4/KIT
반도체 키트 II
With Semiconductors II Kit, "M4/KIT", designed by EDIBON, semiconductors can be studied by extending the knowledge acquired in the basic module "M3/KIT".
2.3.5.- 전력 전자 (기초)
M41
저항 변환기
This unit allows different practices related to resistance transducers to be carried out. The unit has five different types of transducers: PTC, NTC, LDR, strain gauge and RTD.The operation of thermistors is based on the principle that the...
14.2.1.5.- 전력 전자 (기초)
M44
빛 응용
This unit allows different practices related to the measurement of light intensity to be carried out. Photodiodes are semiconductor light sensors that generate a current or voltage when the P-N junction in the semiconductor is illuminated with...
14.2.1.5.- 전력 전자 (기초)
M45
선형 위치 및 힘
Linear Variable Displacement Transducers (LVDT) provide a certain amount of voltage output relative to the parameters being measured, for example force, for signal conditioning.With Linear Position and Force Unit, "M45", designed by EDIBON, it is...
14.2.1.5.- 전력 전자 (기초)
M46
환경 측정
Environmental measurement is a data collection process. In other words, it is a continuous and systematic follow-up study of environmental variables (air quality and speed, humidity, pressure, etc.). The aim is to identify and evaluate...
14.2.1.5.- 전력 전자 (기초)
M47
회전 속도 및 위치 제어
The unit is equipped with a DC motor whose rotation speed can be controlled by the supply voltage. The following sensors are arranged along the motor shaft: optical slot sensor, inductive sensor, infrared reflection sensor, Hall effect sensor,...
14.2.1.5.- 전력 전자 (기초)
M48
소리 측정
With the Sound Measurement Unit, "M48", designed by EDIBON, different practices related to sound measurements can be carried out. The unit has three different types of components: two types of microphones and a loudspeaker.
2.2.- 회로 조립 용 키트
M5/KIT
전원 공급 키트
With the Power Supplies Kit "M5/KIT", designed by EDIBON, symmetrical voltage regulators, operation of fixed, symmetrical and switched-mode power supplies as well as rectification (conversion of an AC voltage to a DC voltage) can be studied.
2.2.- 회로 조립 용 키트
M6/KIT
진동 발생기 키트
With the Oscillators Kit, "M6/KIT", designed by EDIBON, the different oscillators can be studied: RC and LC network oscillators, Wein bridge, Colpitts, Hartley and the astable multivibrator.
2.2.- 회로 조립 용 키트
M7/KIT
오퍼레이션 앰프 키트
With Operational Amplifiers Kit, "M7/KIT", designed by EDIBON, the different amplifiers can be studied: inverting, non-inverting, additive, differential and comparators.
2.2.- 회로 조립 용 키트
M8/KIT
필터 키트
With Filters Kit, "M8/KIT", designed by EDIBON, the different types of filters can be studied: RC and LC, in "T" type configuration, active filters and also study associations of one and others in order to be able to practice with more complex...
2.2.- 회로 조립 용 키트
M9/KIT
전력 전자 키트
With Power Electronics Kit, "M9/KIT", designed by EDIBON, the operation of MOSFET transistors, thyristors, TRIACs, etc. can be studied.
2.3.2.- 아날로그 전자
M99
Analog Circuits Unit
The Analog Circuits Unit, "M99", designed by EDIBON, allows to do different practices related to basic electronics. The unit has different parts: analog multiplexer, analog multiplier, function generator, AM modulator and AM demodulator.The "M99"...
2.3.1.- 기본 전기 법 개념
M99-6
Electronics for Motors and Generators Unit
The Electronics for Motors and Generators Unit, "M99-6", designed by EDIBON, enables to carry out different practices related with motors and generators. The unit has different different types of motors: DC motor, AC motor and stepper motor.The...
2.2.- 회로 조립 용 키트
N-M15
자체 개발 모듈
The Own Development Module "N-M15", designed by EDIBON, consists of a circuit board that will allow the realization of a set of assemblies on the mentioned board, allowing the study of the basic concepts of direct current circuits.The circuits can...
6.1.1.1.- 이론적 실용적 기초
RYC
Computer Controlled Teaching Unit for the Study of Regulation and Control
Regulation and control theory is divided into two major divisions in, namely, classical and modern. The implementation of classical controller designs as compared to systems designed using modern control theory is easier and these controllers are...
6.1.1.1.- 이론적 실용적 기초
RYC-BB
봉-공 시스템용 PID 제어 및 조절 장비
The "RYC-BB" Ball and Beam module has been designed to study a practical control system, through the study of a classical control system, the Ball and Beam Control system.The "RYC-BB" module consists of two main components: the "RYC-BB" apparatus...
6.1.1.1.- 이론적 실용적 기초
RYC-C
유량의 PID 제어 및 조절 장비
The "RYC-C" Flow Rate Control module has been designed to study a practical control system, through the flow rate of a close water circuit.The "RYC-C" module consists of two main components: the "RYC-C" apparatus and the "RYC-C" interface box. The...
6.1.1.1.- 이론적 실용적 기초
RYC-CLM
자기 부상의 PID 제어 및 조절 장비
The "RYC-CLM" Magnetic Levitation Control module has been designed to study a practical control system.The "RYC-CLM" module consists of two main components: the "RYC-CLM" apparatus and the "RYC-CLM" interface box. The "RYC-CLM" apparatus contains...
6.1.1.1.- 이론적 실용적 기초
RYC-CP
모터 위치의 PID 제어 및 조절 장비
The "RYC-CP" Position Control module has been designed to study a practical control system, through the control of a linear position system.The "RYC-CP" module consists of two main components: the "RYC-CP" apparatus and the "RYC-CP" interface box....
6.1.1.1.- 이론적 실용적 기초
RYC-I
조도 PID 제어 및 조절 장비
The "RYC-I" Luminosity Control module has been designed to study a practical control system and study different light sensors, through the luminosity control with three different light sensors.The "RYC-I" module consists of two main components:...
6.1.1.1.- 이론적 실용적 기초
RYC-N
수위의 PID 제어 및 조절 장비
The "RYC-N" Level Control module has been designed to study a practical control system, through the control of the water level of a tank.The "RYC-N" module consists of two main components: the "RYC-N" apparatus and the "RYC-N" interface box. The...
6.1.1.1.- 이론적 실용적 기초
RYC-P
압력 수준 PID 제어 및 조절 장비
The "RYC-P" Pressure Control module has been designed to study a practical control system, through the control of the air pressure level of an air pressure tank.The "RYC-P" module consists of two main components: the "RYC-P" apparatus and the...
6.1.1.1.- 이론적 실용적 기초
RYC-pH
pH 수준 PID 제어 및 조절 장비
The "RYC-pH" pH Control module has been designed to study a practical control system, through the pH dissolution control in a stirred tank.The "RYC-pH" module consists of two main components: "RYC-pH" apparatus and "RYC-pH" interface box. The...
6.1.1.1.- 이론적 실용적 기초
RYC-PI
역진자 PID 제어 및 조절 장비
The "RYC-PI" Inverted Pendulum Control module has been designed to study a practical control system, through the control of a linear position system of movable cart.The "RYC-PI" module consists of two main components: the "RYC-PI" apparatus and...
6.1.1.1.- 이론적 실용적 기초
RYC-SM
DC 서보모터의 PID 제어 및 조절 장비
The "RYC-SM" Servo Motor module has been designed to study a practical control system, through the control of the position and speed of a DC Servo Motor.The "RYC-SM" module consists of two main components: the "RYC-SM" apparatus and the "RYC-SM"...
6.1.1.1.- 이론적 실용적 기초
RYC-TAG
수류 온도의 PID 제어 및 조절 장비
The "RYC-TAG" Water Flow Temperature Control module has been designed to study a practical control system, through the control of water flow temperature.The "RYC-TAG" module consists of two main components: the "RYC-TAG" apparatus and the...
6.1.1.1.- 이론적 실용적 기초
RYC-TAR
기류 온도의 PID 제어 및 조절 장비
The "RYC-TAR" Air Flow Temperature Control module has been designed to study a practical control system, through the control of an air flow temperature.The "RYC-TAR" module consists of two main components: the "RYC-TAR" apparatus and the "RYC-TAR"...
6.1.1.1.- 이론적 실용적 기초
RYC-TE
온도의 PID 제어 및 조절 장비
The "RYC-TE" Temperature Control module has been designed to study a practical control system, through the control of the water temperature in a tank.The "RYC-TE" module consists of two main components: the "RYC-TE" apparatus and the "RYC-TE"...
6.1.1.1.- 이론적 실용적 기초
RYC/B
PID 제어 및 조절 기초 장비
The Basic Teaching Unit for the Study of Regulation and Control, "RYC/B", allows the user to learn the basics about regulation and control of first and second order systems.This unit enables to carry a set of practices related with basic...
6.1.2.1.- 센서 및 전자 기기
SAIT
Transducers and Instrumentation Unit
The Transducers and Instrumentation Unit, "SAIT", has been designed by EDIBON to show most of the devices used in the industry that allow the electronic systems to communicate with the real world, to measure physical variables and to control...
14.2.2.- 전력 전자 (기초)
SCSP
압력 센서 교정 시스템
The Pressure Sensors Calibration System, "SCSP", is mainly composed of two pressure manometers on one hand, one measuring up to 1000 millimeters of water or 100 millibars and the other one measuring up to 2.5 bars and on the other hand, two vacuum...
14.2.2.- 전력 전자 (기초)
SPC
컴퓨터(PC) 기반 데이터 수집이 가능한 계량 시스템
The Weighing System, with Computer Data Acquisition "SPC" consist of a digital force meter that allows to determine both the mass and weight of a body (traction) as well as to determine compression forces.It has different adaptors according to the...
14.2.1.3.- 디지털 전자
TDS
Computer Controlled Teaching Unit for the Study of Digital Signal Processing
The Teaching Unit for the Study of Digital Signal Processing "TDS" allows to study the principles and more important concepts about digital signal processing, including study and practical exercises, among others, of:Continuous waveforms...
6.1.2.2.- 전력 전자 및 산업 전자
TECNEL
Computer Controlled Teaching Unit for the Study of Power Electronics (with IGBTS)
The Computer Controlled Teaching Unit for the Study of Power Electronics (with IGBTS), "TECNEL" is a unit with Computer Control and Data Acquisition System designed to study the basis of Power Electronics. It allows students to study AC/DC, DC/AC,...
6.1.1.3.- 산업 시스템 애플리케이션
UCP-P
Computer Controlled Process Control Unit for the Study of Pressure (Air)
The Computer Controlled Process Control Unit for the Study of Pressure (Air), "UCP-P", consists of a compressed air duct whose flow is controlled by a pneumatic valve (the compressed air or gas source is not included). The air is supplied through...
품질

판매 후 서비스
