9.10.3.- 설치 및 유지 관리 관행

설치 및 유지 관리 관행 UNITS

Showing 1-29 of 29 item(s)
INTRODUCTION TO REFRIGERATION UNIT - TIR
  • TIR
Available
9.10.3.- 설치 및 유지 관리 관행

TIR

Introduction to Refrigeration Unit

The Introduction to Refrigeration Unit, "TIR", is a unit with exchangeable sets in which the components are mounted on plates and quickly connected by flexible hoses.The unit consists of a frame with a compressor, a refrigerant accumulator tank to...
TEMPERATURE MEASUREMENT TRAINING UNIT - TEMT
  • TEMT
Available
9.10.3.- 설치 및 유지 관리 관행

TEMT

Temperature Measurement Training Unit

The Temperature Measurement Training Unit, "TEMT", allows to compare the response of several devices to measure the temperature for different flows and different installation position of these devices.The unit includes four different measuring...
ASSEMBLY AND MAINTENANCE IN REFRIGERATION SYSTEMS UNIT - TAMR
  • TAMR
Available
9.10.3.- 설치 및 유지 관리 관행

TAMR

냉동 설비 조립 및 유지 보수 장비

The Assembly and Maintenance in Refrigeration Systems Unit, "TAMR", has been designed to teach the students the planning, implementation and checking of processes related to the assembly, startup and maintenance of refrigeration systems.The fully...
COMPUTER CONTROLLED REFRIGERATION AND AIR CONDITIONING MODULAR UNIT - TRAMC
  • TRAMC
Available
9.10.3.- 설치 및 유지 관리 관행

TRAMC

컴퓨터(PC) 제어 모듈식 냉동 및 공조 장치

The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below. The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
HOME REFRIGERATION MODEL - TRAMC/1
Available
9.10.3.- 설치 및 유지 관리 관행

TRAMC/1

가정용 냉장고 모델

액세서리 TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
REFRIGERATION SYSTEM WITH REFRIGERATION AND FREEZING STAGE MODEL - TRAMC/2
Available
9.10.3.- 설치 및 유지 관리 관행

TRAMC/2

냉각 및 냉동 단계를 포함한 냉동 설치 모델

액세서리 TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
SIMPLE AIR CONDITIONING SYSTEM MODEL FOR ROOM COOLING - TRAMC/3
Available
9.10.3.- 설치 및 유지 관리 관행

TRAMC/3

공간 냉방용 단순 에어컨 설치 모델

액세서리 TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below. The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
COMPLETE AIR CONDITIONING SYSTEM MODEL - TRAMC/4
Available
9.10.3.- 설치 및 유지 관리 관행

TRAMC/4

완전한 공조 시스템 모델

액세서리 TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
MEASUREMENT AND REGULATION STATION UNIT - MRST
  • MRST
Available
9.10.3.- 설치 및 유지 관리 관행

MRST

Measurement and Regulation Station Unit

The Measurement and Regulation Station Trainer,"MRST", designed by EDIBON is a totally accessible bench-top unit.The unit works with an air compressor that simulates the gas flowing inside the pipes (air testing), allowing to check the tightness...
INSTANTANEOUS GAS HEATER EXPERIMENTATION UNIT - IGHT
  • IGHT
Available
9.10.3.- 설치 및 유지 관리 관행

IGHT

Instantaneous Gas Heater Experimentation Unit

The Instantaneous Gas Heater Trainer, ,IGHT,, designed by EDIBON, is a training unit with wheels to facilitate its mobility that represents a gas heater training system. The unit operates with air, simulating the operation of the heater, so it can...
FORCED DRAFT GAS BURNER UNIT - GBT
  • GBT
Available
9.10.3.- 설치 및 유지 관리 관행

GBT

Forced Draft Gas Burner Unit

The Forced Air Gas Burner Trainer, "GBT", designed by EDIBON, is a compact teaching unit with wheels to facilitate its mobility. It represents a controlled gas system that supplies a forced air gas burner. It allows the study of the arrangement,...
DOMESTIC GAS SUPPLY EXPERIMENTATION UNIT - GHST
  • GHST
Available
9.10.3.- 설치 및 유지 관리 관행

GHST

가정용 가스 공급 실험 장비

The Gas Home Supply Trainer, ,GHST,, designed by EDIBON, consists of a teaching unit where the elements normally used on any domestic gas installation are arranged on the front panel of the unit as in a real installation.The unit works with air,...
ELECTRICAL INSTALLATIONS IN REFRIGERATION SYSTEMS UNIT - TEIR
  • TEIR
Available
9.10.3.- 설치 및 유지 관리 관행

TEIR

Electrical Installations in Refrigeration Systems Unit

For this purpose this unit has been designed to teach the students about different circuits and electrical devices associated with the refrigeration field, how to carry out the wirings of these types of installations, how the refrigeration...
ELECTRICAL CONNECTION OF REFRIGERANT COMPRESSORS UNIT - TECR
  • TECR
Available
9.10.3.- 설치 및 유지 관리 관행

TECR

Electrical Connection of Refrigerant Compressors Unit

The Electrical Connection of Refrigerant Compressors Unit, "TECR", includes the electrical elements required for the start and operation of a refrigerant compressor and the necessary safety elements, arranged on a panel in a clear and visible way,...
ELECTRICAL FAULTS IN AIR CONDITIONING SYSTEMS UNIT - TEFA
  • TEFA
Available
9.10.3.- 설치 및 유지 관리 관행

TEFA

Electrical Faults in Air Conditioning Systems Unit

The Electrical Faults in Air Conditioning Systems Unit,"TEFA", is designed in a simple way in order to transmit comprehensible knowledge about how identify electrical faults in air conditioning systems. For this purpose, concepts are included to...
HYDRAULIC RADIATOR BALANCING TRAINING UNIT - THBT
  • THBT
Available
9.10.3.- 설치 및 유지 관리 관행

THBT

Hydraulic Radiator Balancing Training Unit

The Hydraulic Radiator Balancing Training Unit, "THBT", allows the study of the amount of water with which to guarantee that all the radiators of an installation are supplied with sufficient hot water.The hydraulic balancing is carried out by...
RADIATORS TRAINING UNIT - RT
  • RT
Available
9.10.3.- 설치 및 유지 관리 관행

RT

Radiators Training Unit

The Radiators Training Unit, "RT", has been designed to study hot water heating systems. These systems are called that way because they use water as working fluid between the generation system, usually a boiler, and the emitters, such as...
HEATING SYSTEM TRAINING UNIT - THST
  • THST
Available
9.10.3.- 설치 및 유지 관리 관행

THST

Heating System Training Unit

The Heating System Training Unit, "THST", has been designed to study central heating systems. The unit simulates a central heating system. For that purpose, it is made up of four radiators with a thermostatic valve each. This valve controls the...
THREE-WAY MIXING VALVE TRAINING UNIT - TEV3V
  • TEV3V
Available
9.10.3.- 설치 및 유지 관리 관행

TEV3V

Three-Way Mixing Valve Training Unit

The Three-Way Mixing Valve Training Unit, "TEV3V", allows to demonstrate the function of a three-way mixing valve in a hot water heating system. The three-way mixing valve in the heating system regulates the supply water temperature to a heating...
FOUR-WAY MIXING VALVE TRAINING UNIT - TEV4V
  • TEV4V
Available
9.10.3.- 설치 및 유지 관리 관행

TEV4V

Four-Way Mixing Valve Training Unit

The Four-Way Mixing Valve Training Unit, "TEV4V", allows to demonstrate the function of a four-way mixing valve in a hot water heating system. The four-way mixing valve in the heating system regulates the circulation and feed flow temperatures of...
SANITARY FITTINGS TRAINING UNIT - TEIS
  • TEIS
Available
9.10.3.- 설치 및 유지 관리 관행

TEIS

Sanitary Fittings Training Unit

The Sanitary Fittings Training Unit, "TEIS", has been designed by EDIBON for training in the plumbing sector. It consists of an anodized aluminum frame and panels in painted steel in which tests can be carried out with the most common systems of...
DRINKING WATER INSTALLATION UNIT - TIAP
  • TIAP
Available
9.10.3.- 설치 및 유지 관리 관행

TIAP

Drinking Water Installation Unit

The Drinking Water Installation Unit, "TIAP", has been designed to demonstrate domestic water heating from the cold water supply. A typical domestic drinking water system is attached to the front panel of the unit. The unit includes the most...
PROTECTION OF DRINKING WATER TRAINING UNIT - TPAP
  • TPAP
Available
9.10.3.- 설치 및 유지 관리 관행

TPAP

Protection of Drinking Water Training Unit

The Protection of Drinking Water Training Unit, "TPAP", has been designed by EDIBON to study cases in which the drinking water system is contaminated with wastewater. It is specially designed for the training of students in the plumbing sector.The...
PIPE CLEANING TRAINING UNIT - TELT
  • TELT
Available
9.10.3.- 설치 및 유지 관리 관행

TELT

Pipe Cleaning Training Unit

The Pipe Cleaning Training Unit, "TELT", designed by EDIBON, simulates a real house piping system, so original components used in plumbing systems are employed.The objective of this unit is to study the cleaning of pipes from the sanitation...
SEWERAGE UNIT - TSID
  • TSID
Available
9.10.3.- 설치 및 유지 관리 관행

TSID

Sewerage Unit

With the Sewerage Unit, "TSID", tests about a wastewater sanitation system can be made and the flow in a sewage system can be observed.A complete sewage system can be observed with the "TSID" unit. The collection of wastewater from a series of...
CIRCULATING PUMPS TRAINING UNIT - TCPT
  • TCPT
Available
9.10.3.- 설치 및 유지 관리 관행

TCPT

Circulating Pumps Training Unit

The Circulating Pumps Training Unit, "TCPT", designed by EDIBON, is an advanced tool designed to facilitate the study and understanding of the operation of circulation pumps in heating systems and sanitary techniques. This unit allows...
EXPANSION VESSEL TRAINING UNIT - TEVT
  • TEVT
Available
9.10.3.- 설치 및 유지 관리 관행

TEVT

Expansion Vessel Training Unit

The Expansion Vessel Training Unit, "TEVT", is a test unit for sanitary and heating techniques that allows studying the operation of an expansion vessel. It also allows studying the pressure – volume characteristic curve of it. The aim element of...
PRESSURE VESSEL AND SAFETY FEATURES TRAINING UNIT - TPVST
  • TPVST
Available
9.10.3.- 설치 및 유지 관리 관행

TPVST

Pressure Vessel and Safety Features Training Unit

The Pressure Vessel and Safety Features Training Unit, "TPVST", is an experimentation of sanitary and heating techniques unit that allows studying the safety elements of a heating system with a pressure tank. It consists of a circuit of pipes for...
정보 요청