8.9.- 설치 및 유지 관리

오늘날 사회의 요구는 모든 산업에 대한 도전입니다. 왜냐하면 그것들에 적응하려면 지속적으로 진화하고 갱신해야하기 때문입니다.

최근 몇 년 동안 새로운 산업 혁명 또는 "인더스트리 4.0"의 결과, "산업용 사물 인터넷"(IIoT) 및 "스마트 팩토리"의 등장으로 기술의 적용 덕분에 이러한 요구에 적응할 수 있습니다. 기존 시설의 리노베이션에서 새로운 시설의 설계에서 더 정교합니다.

이러한 모든 기술 발전과 철저한 제어에도 불구하고 생산 공정에 개입하는 모든 요소가 기계적 및 전기적 마모 (노력, 부하 등)의 영향을 받는다는 사실을 잊지 말아야합니다. 그것의 유효 수명이 제한됩니다. 치명적인 고장, 생산 중단 또는 비 생산 시간의 증가와 그에 따른 비용 증가를 의미하는 모든 유형의 프로세스를 방지하려면 기계, 전기 시스템 등을 잘 유지 관리하는 것이 매우 중요합니다.

전통적으로 두 가지 유형의 유지 관리 만 고려되었습니다.

수정 : 이미 발생한 오류를 해결하는 것으로 구성됩니다.
예방 : 문제가되는 모든 요소를 주기적으로 검토하고 고려 된 경우이를 교체하는 것으로 구성됩니다.

이러한 유형의 유지 관리에는 대부분의 경우 매우 높고 불필요한 비용이 포함됩니다. 현재 사용 가능한 기술 덕분에 시스템의 모든 구성 요소에 개입하는 모든 변수에 대한 철저한 분석으로 구성된 예측 유지 관리를 수행하고 정확한 순간에이를 교체 할 수 있습니다.

그러나 마모되는 모든 기계 구성 요소가 겪을 수있는 고장을 더 잘 제어하려면 사전 예방 적 유지 관리라고하는 또 다른 유형의 유지 관리가 있습니다.이 유지 관리는 예측 한 단계를 넘어서 문제의 원인을 찾는 것으로 구성됩니다.

제품보기

설치 및 유지 관리 장비

Showing 1-30 of 32 item(s)

UNIT TO STUDY AN ANGULAR NEEDLE VALVE CUTAWAY MODEL - ANVCM

ANVCM

Available

8.9.1.- 섹션 모델

ANVCM

Unit to Study an Angular Needle Valve Cutaway Model

The Unit to Study an Angular Needle Valve Cutaway Model, "ANVCM", allows the students to visualize the inner parts of a valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile features...

UNIT TO STUDY A BALL VALVE CUTAWAY MODEL - BVCM

BVCM

Available

8.9.1.- 섹션 모델

BVCM

Unit to Study a Ball Valve Cutaway Model

The Unit to Study a Ball Valve Cutaway Model, "BVCM", allows the students to visualize the inner parts of a ball valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile features that...

UNIT TO STUDY A LIFT NON-RETURN VALVE CUTAWAY MODEL - LNVCM

LNVCM

Available

8.9.1.- 섹션 모델

LNVCM

Unit to Study a Lift Non-return Valve Cutaway Model

The Unit to Study a Lift Non-Return Valve Cutaway Model, "LNVCM", allows the students to visualize the inner parts of a needle valve, to evaluate the relation with each other accurately and to understand their function.It is a device with mobile...

UNIT TO STUDY A NON-RETURN BUTTERFLY VALVE CUTAWAY MODEL - NBVCM

NBVCM

Available

8.9.1.- 섹션 모델

NBVCM

Unit to Study a Non-return Butterfly Valve Cutaway Model

The Unit to Study a Non-Return Butterfly Valve Cutaway Model, "NBVCM", allows the students to visualize the inner parts of a butterfly valve, to evaluate the relation with each other accurately and to understand their function.It is a valve to...

UNIT TO STUDY A PIPE MESH FILTER CUTAWAY MODEL - PMFCM

PMFCM

Available

8.9.1.- 섹션 모델

PMFCM

Unit to Study a Pipe Mesh Filter Cutaway Model

The Unit to Study a Pipe Mesh Filter Cutaway Model, "PMFCM", allows the students to visualize the inner parts of a mesh filter, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a mesh filter...

UNIT TO STUDY A STRAIGHT-WAY NEEDLE VALVE CUTAWAY MODEL - SNVCM

SNVCM

Available

8.9.1.- 섹션 모델

SNVCM

Unit to Study a Straight-way Needle Valve Cutaway Model

The Unit to Study a Straight-Way Needle Valve Cutaway Model, "SNVCM", allows the students to visualize the inner parts of a needle valve, to evaluate the relation with each other accurately and to understand their function.It is a device with...

UNIT TO STUDY A WATER METER CUTAWAY MODEL - WMCM

WMCM

Available

8.9.1.- 섹션 모델

WMCM

Unit to Study a Water Meter Cutaway Model

The Unit to Study a Water Meter Cutaway Model, "WMCM", allows the students to visualize the inner parts of a water meter, to evaluate the relation with each other accurately and to understand their function.It is a model of a device that measures,...

UNIT TO STUDY AN UNDERGROUND HYDRANT CUTAWAY MODEL - UHCM

UHCM

Available

8.9.1.- 섹션 모델

UHCM

Unit to Study an Underground Hydrant Cutaway Model

The Unit to Study an Underground Hydrant Cutaway Model, "UHCM", allows the students to visualize the inner parts of a hydrant, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a hydrant is...

CENTRIFUGAL PUMP CUTAWAY MODEL UNIT - CPCM

CPCM

Available

8.9.1.- 섹션 모델

CPCM

원심 펌프 모델 절단 장치

The Centrifugal Pump Cutaway Model Unit, "CPCM", allows the students to visualize the inner parts of a centrifugal pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of centrifugal pump is...

GPCM

Available

8.9.1.- 섹션 모델

GPCM

Gear Pump Cutaway Model Unit

The Gear Pump Cutaway Model Unit, "GPCM", allows the students to visualize the inner parts of a gear pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of gear pump is composed of real...

PPCM

Available

8.9.1.- 섹션 모델

PPCM

Piston Pump Cutaway Model Unit

The Piston Pump Cutaway Model Unit, "PPCM", allows the students to visualize the inner parts of a piston pump, to evaluate the relation with each other accurately and to understand their function.The cutaway model of piston pump is composed of...

Available

8.9.2.- 분리 가능한 모델

ASV

닫힘 밸브 조립 장비

The Assembly of a Shut-Off Valve Unit, "ASV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts list and the...

ASSEMBLY OF A MOTORIZED CONTROL VALVE UNIT - AMCV

AMCV

Available

8.9.2.- 분리 가능한 모델

AMCV

모터 제어 밸브 조립 장비

The Assembly of a Motorized Control Valve Unit, "AMCV" is a ball motorized control valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit,...

ASSEMBLY OF A CONTROL PNEUMATIC VALVE UNIT - ACPV

ACPV

Available

8.9.2.- 분리 가능한 모델

ACPV

에어 밸브 조립 장비

The Assembly of a Control Pneumatic Valve Unit, "ACPV", is a globe valve with bellows supplied in a carrying case that also includes a manual with two-dimensional plans, drawing of individual parts and drawing of the whole unit, the main parts...

Available

8.9.2.- 분리 가능한 모델

AMP

펌프 설치 및 유지보수

The different sets for the assembly and maintenance of pumps have all the parts in a case for an easy transport, facilitating the clearidentification of all the components and allowing the systematic assembly and disassembly, maintenance and...

ASSEMBLY AND MAINTENANCE OF A CENTRIFUGAL PUMP UNIT - AMCP

액세서리 AMP

Available

8.9.2.- 분리 가능한 모델

AMCP

원심 펌프 조립 및 유지 보수 장비

액세서리 AMP

The centrifugal pumps belong to the group of rotodynamic pumps, where the fluid is boosted thanks to the acceleration acquired whenpassing through the operating impeller.This acceleration, which starts from the center of the impeller and goes to...

ASSEMBLY AND MAINTENANCE OF A MULTISTAGE CENTRIFUGAL PUMP UNIT - AMMCP

액세서리 AMP

Available

8.9.2.- 분리 가능한 모델

AMMCP

다단 원심 펌프 조립 및 유지 보수 장비

액세서리 AMP

The multistage centrifugal pumps belong to the group of rotodynamic pumps, where the water is driven by centrifugal forces caused by the rotational movement of the impeller. Multi-stage centrifugal pumps can increase its lifting height, depending...

ASSEMBLY AND MAINTENANCE OF A SCREW PUMP UNIT - AMSP

액세서리 AMP

Available

8.9.2.- 분리 가능한 모델

AMSP

스크류 펌프 조립 및 유지 보수 장비

액세서리 AMP

The screw pumps belong to the group of positive displacement pumps, which use aneccentric helical screw (rotor) that moves inside a sleeve (stator), making the liquid flowbetween the screw and the sleeve. The most important applications of this...

ASSEMBLY AND MAINTENANCE OF A DIAPHRAGM PUMP UNIT - AMDP

액세서리 AMP

Available

8.9.2.- 분리 가능한 모델

AMDP

다이어프램 펌프 조립 및 유지 보수 장비

액세서리 AMP

Membrane pumps or diaphragm pumps belong to the group of positive displacement pumps, where the pressure increase is obtained by pushing elastic walls, known as, membranes or diaphragms, which change the volume of the chamber. Retention valves,...

ASSEMBLY AND MAINTENANCE OF A PISTON PUMP UNIT - AMPP

액세서리 AMP

Available

8.9.2.- 분리 가능한 모델

AMPP

피스톤 펌프 조립 및 유지 보수 장비

액세서리 AMP

The piston pumps belong to the group of positive displacement pumps, where there are one or several fixed cavities whose volume can be changed due to the effect of a piston. The movement of the fluid is discontinuous and the charge and discharge...

ASSEMBLY AND MAINTENANCE OF AN IN-LINE CENTRIFUGAL PUMP UNIT - AMLCP

액세서리 AMP

Available

8.9.2.- 분리 가능한 모델

AMLCP

인라인 원심 펌프 조립 및 유지 보수 장비

액세서리 AMP

The centrifugal in-line pumps belong to the rotodynamic pump group, these pumps are the most used currently to pump liquids in general. In-line pumps are installed in straight pipes, and the main difference with a standard pump is that the suction...

ASSEMBLY AND MAINTENANCE OF A GEAR PUMP UNIT - AMGP

액세서리 AMP

Available

8.9.2.- 분리 가능한 모델

AMGP

기어 펌프 조립 및 유지 보수 장비

액세서리 AMP

The gear pumps belong to the group of positive displacement, rotary piston pumps, which produce flow by transporting the fluid betweenthe teeth of two coupled gears. One of them is driven by the shaft of the pump (driving shaft), which turns the...

PIPES, VALVES AND FITTINGS ASSEMBLY UNIT - PVFA

PVFA

Available

8.9.3.- 설치 및 유지 관리 관행

PVFA

파이프, 밸브 및 부속품 조립 장비

The Pipes, Valves and Fittings Assembly Unit, "PVFA", designed by EDIBON, consists of a solid and rigid U-shaped frame where a series of real pipes and fittings are mounted to form a complete hydraulic system. A filter, a sight glass and a...

BACKFLOW PREVENTION TRAINING UNIT - BFPT

BFPT

Available

8.9.3.- 설치 및 유지 관리 관행

BFPT

Backflow Prevention Training Unit

The Backflow Prevention Training Unit, "BFPT", allows verifying the operation of multiple non-return devices. The system contains the most common backflow prevention devices used in the industry. The main objective is to recognize each element...

THREE-WAY MIXING VALVE TRAINING UNIT - TEV3V

TEV3V

Available

9.10.3.- 설치 및 유지 관리 관행

TEV3V

Three-Way Mixing Valve Training Unit

The Three-Way Mixing Valve Training Unit, "TEV3V", allows to demonstrate the function of a three-way mixing valve in a hot water heating system. The three-way mixing valve in the heating system regulates the supply water temperature to a heating...

FOUR-WAY MIXING VALVE TRAINING UNIT - TEV4V

TEV4V

Available

9.10.3.- 설치 및 유지 관리 관행

TEV4V

Four-Way Mixing Valve Training Unit

The Four-Way Mixing Valve Training Unit, "TEV4V", allows to demonstrate the function of a four-way mixing valve in a hot water heating system. The four-way mixing valve in the heating system regulates the circulation and feed flow temperatures of...

TEIS

Available

9.10.3.- 설치 및 유지 관리 관행

TEIS

Sanitary Fittings Training Unit

The Sanitary Fittings Training Unit, "TEIS", has been designed by EDIBON for training in the plumbing sector. It consists of an anodized aluminum frame and panels in painted steel in which tests can be carried out with the most common systems of...

TIAP

Available

9.10.3.- 설치 및 유지 관리 관행

TIAP

Drinking Water Installation Unit

The Drinking Water Installation Unit, "TIAP", has been designed to demonstrate domestic water heating from the cold water supply. A typical domestic drinking water system is attached to the front panel of the unit. The unit includes the most...

PROTECTION OF DRINKING WATER TRAINING UNIT - TPAP

TPAP

Available

9.10.3.- 설치 및 유지 관리 관행

TPAP

Protection of Drinking Water Training Unit

The Protection of Drinking Water Training Unit, "TPAP", has been designed by EDIBON to study cases in which the drinking water system is contaminated with wastewater. It is specially designed for the training of students in the plumbing sector.The...

TELT

Available

9.10.3.- 설치 및 유지 관리 관행

TELT

Pipe Cleaning Training Unit

The Pipe Cleaning Training Unit, "TELT", designed by EDIBON, simulates a real house piping system, so original components used in plumbing systems are employed.The objective of this unit is to study the cleaning of pipes from the sanitation...

추가 정보는 미국에 문의하십시오